Opening the book…
Two atoms form a bond when the pair has less total energy close together than far apart. Whatever the kind of bond, its energy as a function of the separation \(r\) between the nuclei has the same general shape (Figure 42.1). At large separations the potential energy \(U(r)\) is zero; the atoms ignore each other. As they approach, an attractive force pulls them together and \(U\) falls. At very close range, a strong repulsion takes over and \(U\) climbs steeply. Part of the repulsion is the Coulomb push between the two nuclei, but most of it comes from the Pauli exclusion principle (Chapter 41): when the filled inner shells of the two atoms begin to overlap, their electrons cannot share the same states, so some are forced into higher-energy states. The balance point, the minimum of the curve, is the equilibrium separation \(r_0\), and the depth of the well below zero is the energy needed to pull the atoms apart, the dissociation energy (or bond energy) of the molecule.
What supplies the attraction depends on the atoms, and it is the basis for classifying bonds.
Ionic bonds. An ionic bond forms when one atom gives up an electron to another and the resulting positive and negative ions attract each other electrically. Sodium chloride is the classic case. Sodium has a single valence electron outside a closed shell (Chapter 41), which takes only \(5.14\,\mathrm{eV}\) to remove. Chlorine is one electron short of a closed shell, and it releases \(3.61\,\mathrm{eV}\), its electron affinity, when it captures an extra electron. Transferring an electron from Na to Cl therefore costs a net \(5.14 - 3.61 = 1.53\,\mathrm{eV}\). That cost is repaid many times over by the Coulomb attraction of the ions, \(U = -ke^2/r\), once they are close together.
For atomic-scale calculations it helps to know that
\[ke^2 = 1.44\,\mathrm{eV\cdot nm},\]
so the electrical potential energy of two singly charged ions at a separation \(r\) in nanometers is \(-1.44/r\) in electron-volts.
Example 42.1: The bond in a sodium chloride molecule
In a molecule of NaCl the ions are \(0.236\,\mathrm{nm}\) apart. (a) Estimate the energy released in forming the molecule from neutral Na and Cl atoms, ignoring the short-range repulsion. (b) At what separation does transferring the electron first become energetically favorable?
Solution
(a) The Coulomb energy of the ion pair at \(r_0\) is
\[U = -\frac{ke^2}{r_0} = -\frac{1.44\,\mathrm{eV\cdot nm}}{0.236\,\mathrm{nm}} = -6.10\,\mathrm{eV}.\]
Making the ions in the first place cost \(1.53\,\mathrm{eV}\), so the energy released is about
\[6.10 - 1.53 = \boxed{4.6\,\mathrm{eV}}.\]
The measured dissociation energy is \(4.26\,\mathrm{eV}\). The difference of about \(0.3\,\mathrm{eV}\) is the repulsion of the overlapping closed shells, which we ignored.
(b) The transfer pays off once the Coulomb energy exceeds the \(1.53\,\mathrm{eV}\) cost:
\[r < \frac{1.44\,\mathrm{eV\cdot nm}}{1.53\,\mathrm{eV}} = \boxed{0.94\,\mathrm{nm}},\]
about four times the final bond length. Inside that distance the electron effectively jumps from the sodium to the chlorine, and the ions then pull each other in to \(r_0\).
Covalent bonds. Two identical atoms, such as the two hydrogen atoms of \(\mathrm{H_2}\), have no reason to trade an electron. Instead they share a pair. In a covalent bond the wave functions of the two atoms’ electrons combine into a molecular state concentrated between the nuclei, where each electron is attracted by both nuclei at once. The Pauli exclusion principle allows two electrons to occupy that one spatial state only if their spins are opposite, which is why covalent bonds are built from electron pairs. The \(\mathrm{H_2}\) bond has \(r_0 = 0.074\,\mathrm{nm}\) and a dissociation energy of \(4.52\,\mathrm{eV}\). Carbon, with four valence electrons, can form four covalent bonds pointing toward the corners of a tetrahedron; in diamond every carbon atom is bonded this way to four neighbors, locking every valence electron into a bond. Covalent bonds are strong and directional, and covalent solids such as diamond and silicon are hard and have high melting points.
Weaker bonds. Even atoms with closed shells, such as argon, attract each other weakly. The electron cloud of each atom fluctuates, creating a momentary electric dipole that induces a dipole in its neighbor, and the two dipoles attract. These van der Waals bonds are a hundred times weaker than covalent ones, which is why argon becomes a liquid only below \(87\,\mathrm{K}\). Molecules with permanent dipoles attract more strongly. In a hydrogen bond, a hydrogen atom covalently bonded to a strongly electronegative atom (oxygen, nitrogen, or fluorine) is left as a nearly bare proton on one side, and it attracts a lone electron pair on a neighboring molecule. Hydrogen bonds hold water molecules together into the open structure of ice (Chapter 36) and hold together the two strands of DNA, strongly enough to be stable and weakly enough to be unzipped when a cell divides.
Metallic bonds. In a metal, each atom gives up one or more valence electrons, not to a particular neighbor but to the crystal as a whole. The positive ions sit in a regular lattice immersed in a “sea” of electrons that belong to no atom in particular, and the attraction between the ions and the electron sea holds the metal together. This metallic bond is not directional, which is why metals can be bent and hammered into shape without shattering, and its free electrons are what make metals conduct. Section 42.2 takes them up.
| Bond | Example | Typical energy | Origin of the attraction |
|---|---|---|---|
| Ionic | NaCl | \(\SIrange{3}{8}{eV}\) | Coulomb attraction of ions |
| Covalent | \(\mathrm{H_2}\), diamond | \(\SIrange{2}{10}{eV}\) | shared electron pair |
| Metallic | Cu, Na | \(\SIrange{1}{5}{eV}\) | ions in a sea of electrons |
| Hydrogen | water, DNA | \(\SIrange{0.1}{0.4}{eV}\) | nearly bare proton and lone pair |
| Van der Waals | solid Ar | \(\SIrange{0.01}{0.1}{eV}\) | induced fluctuating dipoles |
Checkpoint 42.1
Solid sodium chloride melts at \(801^{\circ}\mathrm{C}\), while solid argon melts at \(-189^{\circ}\mathrm{C}\). Use Table 42.1 to explain the enormous difference.
Molecular vibrations. Near the bottom of the well in Figure 42.1, the potential-energy curve is very nearly a parabola, \(U \approx U_{\rm min} + \tfrac12 k(r - r_0)^2\). The bond acts like a spring of stiffness \(k\), and the two atoms oscillate along it as a simple harmonic oscillator (Chapter 28) with frequency
\[f = \frac{1}{2\pi}\sqrt{\frac{k}{\mu}}, \qquad \mu = \frac{m_1 m_2}{m_1 + m_2}, \tag{42.1}\]
where \(\mu\), the reduced mass, accounts for both atoms moving. (For two identical atoms of mass \(m\), \(\mu = m/2\).) But a molecule is a quantum system, and like the electron in a well (Chapter 40), its vibrational energy is quantized. Solving Schrödinger’s equation for a parabolic potential gives equally spaced levels:
Key Equation: Vibrational energy levels
\[E_v = \left(v + \tfrac12\right)hf, \qquad v = 0, 1, 2, \dots \tag{42.2}\]
Two features stand out. The levels are spaced by exactly \(hf\), so a molecule can absorb or emit vibrational energy only in quanta of \(hf\); these transitions fall in the infrared, and they are why carbon dioxide and water vapor absorb the infrared radiation from Earth’s surface. And the lowest level, \(v = 0\), has energy \(\tfrac12 hf\), not zero: like any confined particle, the molecule can never be perfectly still. (Higher up, where the real well widens, the levels crowd slightly closer together, as Figure 42.1 shows.)
Example 42.2: Why nitrogen does not vibrate
The nitrogen molecule \(\mathrm{N_2}\) vibrates at \(f = 7.07\times 10^{13}\,\mathrm{Hz}\). (a) Find the spacing of its vibrational levels in eV. (b) Find the stiffness of the bond. Each nitrogen atom has mass \(2.33\times 10^{-26}\,\mathrm{kg}\). (c) In a gas at \(300\,\mathrm{K}\), what fraction of the molecules are in the first excited vibrational level? Use the Boltzmann factor \(e^{-\Delta E/k_BT}\) (Chapter 41).
Solution
(a) \[hf = (6.626\times10^{-34}\,\mathrm{J\cdot s})(7.07\times10^{13}\,\mathrm{Hz}) = 4.68\times 10^{-20}\,\mathrm{J} = \boxed{0.292\,\mathrm{eV}}.\]
(b) For two identical atoms \(\mu = m/2 = 1.165\times 10^{-26}\,\mathrm{kg}\). Solving equation (42.1) for \(k\),
\[k = (2\pi f)^2\mu = (4.44\times10^{14}\,\mathrm{s^{-1}})^2(1.165\times10^{-26}\,\mathrm{kg}) = \boxed{2.3\times 10^{3}\,\mathrm{N/m}},\]
about as stiff as a car’s suspension spring, for a “spring” a tenth of a nanometer long.
(c) At \(300\,\mathrm{K}\), \(k_BT = 0.0259\,\mathrm{eV}\), so the step is \(0.292/0.0259 = 11.3\) times \(k_BT\), and
\[\frac{N_1}{N_0} = e^{-11.3} \approx \boxed{1\times10^{-5}}.\]
Only about one molecule in a hundred thousand is vibrating. Collisions in a room-temperature gas almost never carry enough energy to excite the vibration, so it contributes nothing to the heat capacity. This is the “frozen-out” degree of freedom of Chapter 36, and it explains why the measured \(C_V\) of nitrogen is \(\tfrac52R\) rather than \(\tfrac72R\). Only above about \(1000\,\mathrm{K}\) does the vibration begin to wake up.
Answers to Checkpoints
Checkpoint 42.1. Melting requires enough thermal energy to break the bonds that hold particles in place. Sodium chloride is held together by ionic bonds of several electron-volts per ion pair, while solid argon is held only by van der Waals bonds of about a hundredth of an electron-volt, hundreds of times weaker. Argon’s bonds are broken by thermal agitation at very low temperatures; sodium chloride needs to be red-hot.
This page titled 42.1: Molecular Bonds was last modified on Thu, 12 Nov 2026 04:27:07 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.