37.1: Heat

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    37.1: Heat

    Heat is energy transferred between a system and its surroundings because of a temperature difference between them. We give it the symbol \(Q\), and the crucial directional fact is that heat always flows spontaneously from higher temperature to lower temperature, never the other way on its own: a one-way street we will examine closely in Chapter 38.

    It is worth being careful with words, because everyday language blurs three different ideas.

    • Temperature measures the average kinetic energy of a substance’s molecules (Chapter 36). It says nothing about how much matter there is.
    • Internal energy \(E_{\rm int}\) is the total energy of all the molecules: their kinetic energy of translation, rotation, and vibration, and the potential energy of the forces between them. It is a property of the system, like its mass or its volume.
    • Heat is not something a system has. It is energy in transit, crossing the boundary because of a temperature difference. Once it has arrived, it is simply part of the internal energy.

    A swimming pool and a cup of coffee can be at the same temperature, yet the pool has vastly more internal energy and can deliver far more heat, simply because it contains far more matter. And a hot object does not contain “heat” any more than a bank account contains “deposits”: deposits are what came in, but the account holds money.

    Heat is energy, so its SI unit is the joule. Two older units persist. The calorie (cal) is the heat needed to raise one gram of water by one Celsius degree, and the Calorie (Cal, capital C) used on food labels is actually a kilocalorie:

    \[1\,\mathrm{cal} = 4.186\,\mathrm{J}, \qquad 1\ \text{Cal} = 1000\ \text{cal} = 4186\,\mathrm{J}.\]

    The candy bar that lists “\(250\) Calories” is quoting a quarter of a million of the physicist’s calories.

    That heat and work are measured in the same unit was not obvious. Through the eighteenth century heat was thought to be an invisible fluid, “caloric,” that flowed from hot bodies into cold ones. In the 1840s James Prescott Joule showed otherwise. In his best-known experiment, falling weights turned a paddle wheel in an insulated tank of water, and the stirred water warmed by exactly the amount that the same quantity of heat would have warmed it. Mechanical work and heat were interchangeable, at a fixed exchange rate of \(4.186\,\mathrm{J}\) per calorie, the mechanical equivalent of heat. Both are simply ways of transferring energy.

    Example 37.1: Working off a candy bar

    A \(70\,\mathrm{kg}\) hiker eats a \(250\)-Calorie candy bar and wants to “burn it off” by climbing stairs. (a) If all of the food energy went into gravitational potential energy, how high would the hiker have to climb? (b) Human muscles convert food energy to mechanical work with an efficiency of only about \(25\%\); the rest becomes internal energy and is shed as heat. How high must the hiker really climb?

    Solution

    (a) The food energy is \(250\times4186\,\mathrm{J} = 1.05\times 10^{6}\,\mathrm{J}\). Setting it equal to \(mgh\),

    \[h = \frac{E}{mg} = \frac{1.05\times10^6}{(70)(9.8)} \approx \boxed{1500\,\mathrm{m}}.\]

    (b) Only a quarter of the energy does mechanical work, so the climb is a quarter as high:

    \[h = (0.25)(1500\,\mathrm{m}) \approx \boxed{380\,\mathrm{m}},\]

    about the height of the Empire State Building’s roof. The other \(75\%\) warms the body, which is why a stair climb makes you sweat. Food energy is a great deal of energy by mechanical standards.

    Temperature Changes

    How much heat does it take to warm a given object by a given amount? The answer depends on the object’s mass and on a property of its material called the specific heat capacity \(c\), or simply specific heat: the heat required to raise the temperature of one kilogram of the substance by one kelvin. The relation is

    Key Equation: Heat and temperature change

    \[Q = mc\,\Delta T, \tag{37.1}\]

    where \(m\) is the mass, \(c\) the specific heat (units \(\,\mathrm{J/(kg\cdot K)}\)), and \(\Delta T = T_f - T_i\) the temperature change. A positive \(Q\) (heat in) raises the temperature, and a negative \(Q\) (heat out) lowers it. The product \(C = mc\) is the heat capacity of a particular object, the heat needed to raise its temperature by one kelvin.

    Table 37.1. Specific heats of some common substances near room temperature and atmospheric pressure.
    Substance\(c\) (\(\,\mathrm{J/(kg\cdot K)}\))Substance\(c\) (\(\,\mathrm{J/(kg\cdot K)}\))
    Water (liquid)\(4186\)Granite\(790\)
    Human body (average)\(3500\)Iron\(452\)
    Ethanol\(2430\)Copper\(387\)
    Ice (\(-10^{\circ}\mathrm{C}\))\(2090\)Silver\(235\)
    Steam (\(110^{\circ}\mathrm{C}\))\(2010\)Mercury\(140\)
    Aluminum\(900\)Lead\(128\)
    Glass\(840\)

    A large \(c\) means a substance is hard to heat up and hard to cool down: it stores a lot of energy per degree. Water is the standout in Table 37.1: its specific heat is several times that of most solids and nearly five times aluminum’s. (The human body, mostly water, comes close.)

    This single number answers the question we opened with. The ocean’s enormous specific heat lets it absorb and release tremendous quantities of heat with only a small change in its own temperature, so the air above it, and the towns along the coast, stay mild. Inland, dry soil and rock (specific heats near \(800\,\mathrm{J/(kg\cdot K)}\) or less) heat up and cool down quickly, and the temperature swings to extremes. The effect is magnified because sunlight penetrates many meters into clear water and the waves mix it, so a great depth of ocean shares each day’s heat, while on land only the top few centimeters of soil warm up.

    Checkpoint 37.1

    Two identical pots, one holding \(1\,\mathrm{kg}\) of water and the other \(1\,\mathrm{kg}\) of aluminum, receive the same amount of heat. Which ends up hotter, and by roughly what factor is its temperature change larger? (Use equation (37.1) with Table 37.1.)

    Answer

    Example 37.2: Heating a bullet on impact

    A silver bullet is fired at \(200\,\mathrm{m/s}\) into a wooden wall and stops. Assume all of the bullet’s kinetic energy becomes internal energy that stays in the bullet.

    1. What is the temperature change of the silver bullet? (For silver, \(c = 235\,\mathrm{J/(kg\cdot K)}\).)
    2. If a lead bullet (\(c = 128\,\mathrm{J/(kg\cdot K)}\)) were used instead, would its temperature change be larger or smaller?
    Solution

    (a) The kinetic energy all goes into heating the bullet, \(\tfrac12 m v^2 = mc\,\Delta T\). The mass cancels:

    \[\Delta T = \frac{v^2}{2c} = \frac{(200\,\mathrm{m/s})^2}{2(235\,\mathrm{J/(kg\cdot K)})} = \frac{40000}{470} \approx \boxed{85\,\mathrm{K}}.\]

    (b) Since \(\Delta T = v^2/2c\), a smaller specific heat gives a larger temperature change. Lead’s \(c\) is smaller than silver’s, so the lead bullet heats up \(\boxed{\text{more}}\): by \((200)^2/2(128) \approx 156\,\mathrm{K}\), nearly twice as much, which takes it a good part of the way toward lead’s low melting point of \(327^{\circ}\mathrm{C}\).

    Phase Changes

    A graph of temperature against heat added as a substance is warmed from solid to gas.
    Figure 37.1. Heating a substance through its phase changes. Along the sloped segments the temperature rises (\(Q = mc\,\Delta T\)); along the flat plateaus the temperature holds steady while a phase change absorbs the heat (\(Q = mL\)). The melting plateau and the longer boiling plateau are the latent heats at work.
    Figure descriptionA graph of temperature against heat added as a substance is warmed from solid to gas. The curve rises in a straight sloped segment labeled solid, then runs flat along a plateau labeled melting at the melting temperature T sub m, then rises again through a segment labeled liquid, then runs flat along a longer plateau labeled boiling at the boiling temperature T sub b, and finally rises again as gas. On the sloped parts the heat raises the temperature; on the flat plateaus it drives a phase change instead, and the boiling plateau is far longer than the melting one.

    Add heat to a block of ice and its temperature climbs, until it reaches \(0^{\circ}\)C. There the temperature stops rising even as you keep adding heat, while the ice melts to water; only once all the ice is gone does the temperature start to climb again (Figure 37.1). The heat poured in during melting does not raise the temperature, so it does not speed up the molecules; it goes into breaking the bonds that hold the solid together, raising the molecules’ potential energy instead. This energy of a phase change is the latent heat (literally “hidden” heat), and the heat to change the phase of a mass \(m\) is

    Key Equation: Heat of a phase change

    \[Q = mL, \tag{37.2}\]

    where \(L\) is the latent heat of the substance (units \(\,\mathrm{J/kg}\)). There are three kinds: the latent heat of fusion \(L_f\) for melting or freezing (solid \(\leftrightarrow\) liquid), the latent heat of vaporization \(L_v\) for boiling or condensing (liquid \(\leftrightarrow\) gas), and the latent heat of sublimation \(L_s\) for the direct solid \(\leftrightarrow\) gas change. The same \(L\) applies in both directions: freezing a kilogram of water releases exactly the \(3.33\times 10^{5}\,\mathrm{J}\) it took to melt it. When applying equation (37.2), take \(Q\) positive for melting and boiling (heat in) and negative for freezing and condensing (heat out).

    Table 37.2. Melting and boiling points at atmospheric pressure, with latent heats of fusion and vaporization.
    SubstanceMelting point\(L_f\) (\(\,\mathrm{J/kg}\))Boiling point\(L_v\) (\(\,\mathrm{J/kg}\))
    Nitrogen\(-210^{\circ}\mathrm{C}\)\(2.55\times10^{4}\)\(-196^{\circ}\mathrm{C}\)\(2.01\times10^{5}\)
    Ethanol\(-114^{\circ}\mathrm{C}\)\(1.04\times10^{5}\)\(78^{\circ}\mathrm{C}\)\(8.54\times10^{5}\)
    Mercury\(-39^{\circ}\mathrm{C}\)\(1.18\times10^{4}\)\(357^{\circ}\mathrm{C}\)\(2.72\times10^{5}\)
    Water\(0^{\circ}\mathrm{C}\)\(3.33\times10^{5}\)\(100^{\circ}\mathrm{C}\)\(2.26\times10^{6}\)
    Lead\(327^{\circ}\mathrm{C}\)\(2.45\times10^{4}\)\(1750^{\circ}\mathrm{C}\)\(8.70\times10^{5}\)
    Aluminum\(660^{\circ}\mathrm{C}\)\(3.97\times10^{5}\)\(2450^{\circ}\mathrm{C}\)\(1.14\times10^{7}\)

    For water the values are large (Table 37.2): \(L_f = 3.33\times 10^{5}\,\mathrm{J/kg}\) and \(L_v = 2.26\times 10^{6}\,\mathrm{J/kg}\). Vaporizing water takes nearly seven times the energy of melting it, because boiling must pull the molecules completely apart while melting only loosens them. That is why steam burns are so severe (condensing on your skin, steam delivers its large latent heat) and why sweating cools you so effectively.

    Example 37.3: From ice to steam

    How much heat does it take to turn \(1.00\,\mathrm{kg}\) of ice at \(-10^{\circ}\mathrm{C}\) into steam at \(110^{\circ}\mathrm{C}\)? Which step takes the most?

    Solution

    Follow Figure 37.1 step by step, using Tables 37.1 and 37.2.

    \[\begin{aligned}\text{warm the ice, } -10 \to 0^{\circ}\mathrm{C}: \quad & Q_1 = (1.00)(2090)(10) = 20900\,\mathrm{J} \\ \text{melt the ice:} \quad & Q_2 = (1.00)(3.33\times10^5) = 333000\,\mathrm{J} \\ \text{warm the water, } 0 \to 100^{\circ}\mathrm{C}: \quad & Q_3 = (1.00)(4186)(100) = 418600\,\mathrm{J} \\ \text{boil the water:} \quad & Q_4 = (1.00)(2.26\times10^6) = 2260000\,\mathrm{J} \\ \text{warm the steam, } 100 \to 110^{\circ}\mathrm{C}: \quad & Q_5 = (1.00)(2010)(10) = 20100\,\mathrm{J}\end{aligned}\]

    The total is

    \[Q = Q_1 + Q_2 + Q_3 + Q_4 + Q_5 = \boxed{3.05\times 10^{6}\,\mathrm{J}}.\]

    Boiling alone takes \(2.26/3.05 = 74\%\) of it, more than five times the heat needed to warm the water all the way from freezing to boiling. This is why a pot left on the stove takes so long to boil dry.

    Calorimetry

    When a hot object and a cold object are placed together and isolated from everything else, heat flows from hot to cold until they reach a common temperature. Energy is conserved, so the heat lost by the hot object equals the heat gained by the cold one. This bookkeeping, calorimetry, is the standard way to measure specific heats and latent heats. The rule is simply that the heat gains and losses sum to zero,

    \[\sum Q = 0, \tag{37.3}\]

    where each \(Q\) is computed with \(Q = mc\,\Delta T\) (and \(Q = mL\) for any phase change along the way), taking \(\Delta T = T_{\rm final} - T_{\rm initial}\) so that objects that cool contribute negative \(Q\) and objects that warm contribute positive \(Q\).

    Example 37.4: Specific heat of a mystery liquid

    A piece of glass at \(85.0^{\circ}\mathrm{C}\) is covered by an equal mass of liquid at \(43.0^{\circ}\mathrm{C}\). The two reach equilibrium at \(57.0^{\circ}\mathrm{C}\). Ignoring the container and any loss to the surroundings, find the specific heat of the liquid. (For glass, \(c = 840\,\mathrm{J/(kg\cdot K)}\).)

    Solution

    The glass cools and the liquid warms; the heat lost by the glass equals the heat gained by the liquid. With equal masses \(m\), the \(m\) cancels:

    \[\underbrace{m c_{\rm glass}(85.0 - 57.0)}_{\text{lost by glass}} = \underbrace{m c_{\rm liq}(57.0 - 43.0)}_{\text{gained by liquid}}.\]

    Solving for the liquid’s specific heat,

    \[c_{\rm liq} = c_{\rm glass}\,\frac{85.0 - 57.0}{57.0 - 43.0} = (840)\frac{28.0}{14.0} = \boxed{1680\,\mathrm{J/(kg\cdot K)}}.\]

    The liquid changed temperature by only \(14^{\circ}\) while the glass changed by \(28^{\circ}\), so for equal masses the liquid must store more energy per degree: consistent with its larger specific heat.

    Example 37.5: Finding a metal’s specific heat

    A \(4.2\,\mathrm{kg}\) metal bar at \(114^{\circ}\mathrm{C}\) is dropped into a \(2.3\,\mathrm{kg}\) aluminum calorimeter containing \(3.9\,\mathrm{kg}\) of water, both initially at \(18^{\circ}\mathrm{C}\). The system reaches equilibrium at \(42^{\circ}\mathrm{C}\). Find the specific heat of the metal. (Water \(c = 4186\,\mathrm{}\), aluminum \(c = 900\,\mathrm{J/(kg\cdot K)}\).)

    Solution

    The bar cools from \(114^{\circ}\) to \(42^{\circ}\) (\(\Delta T = 72^{\circ}\)); the water and the aluminum cup both warm from \(18^{\circ}\) to \(42^{\circ}\) (\(\Delta T = 24^{\circ}\)). Heat lost by the bar equals heat gained by water plus aluminum:

    \[m_{\rm bar}c_{\rm bar}(72) = m_w c_w(24) + m_{\rm Al}c_{\rm Al}(24).\]

    The right side is

    \[(3.9)(4186)(24) + (2.3)(900)(24) = 391{,}810 + 49{,}680 = 441{,}490\,\mathrm{J}.\]

    The left side is \(m_{\rm bar}c_{\rm bar}(72) = (4.2)(72)\,c_{\rm bar} = 302.4\,c_{\rm bar}\), so

    \[c_{\rm bar} = \frac{441{,}490}{302.4} \approx \boxed{1460\,\mathrm{J/(kg\cdot K)}}.\]

    That is a large value for a metal (most metals lie below \(1000\,\mathrm{J/(kg\cdot K)}\); beryllium, at about \(1820\,\mathrm{J/(kg\cdot K)}\), is a rare exception), but it does fall between water’s and aluminum’s: a sanity check that we have not lost a factor somewhere.

    Example 37.6: Punch and ice: does it all melt?

    At a party, \(1.00\,\mathrm{kg}\) of punch (treat it as water) sits at \(24^{\circ}\mathrm{C}\) in a thermally isolated bowl. Someone adds \(500\,\mathrm{g}\) of ice at \(-10^{\circ}\mathrm{C}\). Find the final temperature. (Ice \(c = 2090\,\mathrm{}\), water \(c = 4186\,\mathrm{}\), \(L_f = 3.33\times 10^{5}\,\mathrm{J/kg}\).)

    Solution

    The question in the title is the key: we must not assume all the ice melts. Tally the energy demands and supply, taking \(0^{\circ}\)C as the meeting point.

    Heat the punch can give up cooling from \(24^{\circ}\) to \(0^{\circ}\):

    \[Q_{\rm punch} = m c_w \Delta T = (1.00)(4186)(24) = 100{,}500\,\mathrm{J}.\]

    Heat to warm the ice from \(-10^{\circ}\) to \(0^{\circ}\):

    \[Q_{\rm warm} = m c_{\rm ice}\Delta T = (0.500)(2090)(10) = 10{,}450\,\mathrm{J}.\]

    Heat to melt all the ice:

    \[Q_{\rm melt} = m L_f = (0.500)(3.33\times10^5) = 166{,}500\,\mathrm{J}.\]

    After the punch warms the ice to \(0^{\circ}\) it has \(100{,}500 - 10{,}450 = 90{,}050\,\mathrm{J}\) left, not enough to melt all \(166{,}500\,\mathrm{J}\) worth of ice. So the ice does not all melt, and the system settles at

    \[\boxed{T_f = 0^{\circ}\mathrm{C}},\]

    an ice–water slush. The leftover energy melts only \(m = (90{,}050)/(3.33\times10^5) \approx 0.27\,\mathrm{kg}\) of the ice, leaving about \(0.23\,\mathrm{kg}\) unmelted.

    Answers to Checkpoints

    Checkpoint 37.1. The aluminum. With the same \(Q\) and mass, \(\Delta T = Q/(mc)\) is inversely proportional to the specific heat. Water’s specific heat is about \(4186\,\mathrm{J/(kg\cdot K)}\) and aluminum’s about \(900\,\mathrm{J/(kg\cdot K)}\), so the aluminum’s temperature rises roughly \(4186/900 \approx 4.7\) times as much.


    This page titled 37.1: Heat was last modified on Thu, 12 Nov 2026 04:26:55 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.