Opening the book…
In Chapter 4 (§4.3) we found that a particle moving in a circle of radius \(r\) at constant speed \(v\) has a centripetal acceleration of magnitude \(a_c = v^2/r\) (equation (4.13)), directed always toward the center of the circle. That was kinematics: a fact about geometry. Newton’s second law now turns it into dynamics: an acceleration requires a force.
One kinematic relation from that section will keep coming back. If the object completes one full revolution in a time \(T\) (the period), it travels a distance \(2\pi r\) in that time, so
\[v = \frac{2\pi r}{T}, \qquad T = \frac{1}{f}, \tag{6.7}\]
where \(f\) is the number of revolutions per unit time. This is the same period \(T\) as in Chapter 4.
Key Equation: Newton’s second law for circular motion
\[F_{\rm net} = m a_c = \frac{m v^2}{r}, \qquad \text{directed toward the center.} \tag{6.8}\]
The net force pointing toward the center is called the centripetal force (Figure 6.3). The crucial conceptual point, and the most common source of error, is that the centripetal force is not a new kind of force, and it does not get added to a free-body diagram. It is the name we give to the net inward force, and that net force is always supplied by ordinary forces you already know:
- the tension in a string, for a ball whirled on a cord;
- friction, for a car rounding a flat curve;
- the normal force, for a passenger at the top of a loop or the bank of a curve;
- gravity, for a satellite or the Moon.
The recipe, then, is to draw the real forces, point a coordinate axis toward the center, and set the net inward force equal to \(m v^2/r\).
Example 6.6: A ball on a string
A ball of mass \(0.65\,\mathrm{kg}\) is attached to a string of length \(0.55\,\mathrm{m}\) and swung at a speed of \(25\,\mathrm{m/s}\). (a) Find the string tension if the circle is horizontal (treating the string as horizontal, so that the weight is negligible beside the large inward force). (b) Find the maximum tension if the circle is vertical. Assume in both parts that the ball is driven so that its speed stays at \(25\,\mathrm{m/s}\) all the way around; a ball swung freely in a vertical circle in fact speeds up on the way down and slows on the way up, which we will be able to handle once we have energy conservation in Chapter 8.
Solution
The centripetal term is
\[\frac{mv^2}{r} = \frac{(0.65\,\mathrm{kg})(25\,\mathrm{m/s})^2}{0.55\,\mathrm{m}} \approx 739\,\mathrm{N}.\]
(a) For a horizontal circle the tension supplies the entire centripetal force, while the ball’s weight (\(mg = 6.4\,\mathrm{N}\)) is tiny by comparison:
\[F_T = \frac{mv^2}{r} \approx \boxed{7.4\times 10^{2}\,\mathrm{N}}.\]
(b) In a vertical circle the tension is largest at the bottom, where the string must both supply the centripetal force and support the weight. There the inward (upward) direction gives
\[F_T - mg = \frac{mv^2}{r} \;\Longrightarrow\; F_T = \frac{mv^2}{r} + mg = 739 + 6.4 \approx \boxed{7.5\times 10^{2}\,\mathrm{N}}.\]
At this speed the weight is a small correction; at low speeds it would dominate the difference between top and bottom.
Example 6.7: The slowest you can swing a bucket
A ball is swung in a vertical circle of radius \(r\) on a string. How slowly can it pass through the top of the circle and still travel in a circle at all?
Solution
At the top of the circle the center is below the ball, so “toward the center” means straight down, and both forces on the ball (the tension and the weight) point that way. Taking downward (toward the center) as positive, the net inward force equals \(mv^2/r\):
\[F_T + mg = \frac{mv^2}{r} \;\Longrightarrow\; F_T = \frac{mv^2}{r} - mg ,\]
where the second form comes from subtracting \(mg\) from both sides. Read that result carefully: the required inward force is \(mv^2/r\), gravity supplies \(mg\) of it for free, and the string only has to make up the difference. As \(v\) drops, less and less tension is needed. When
\[\frac{mv^2}{r} = mg,\]
the weight alone is exactly the centripetal force the circle requires, and the string goes slack. Below that speed the string cannot help (a string can pull but never push, so \(F_T\) can never be negative) and the ball leaves its circular path. Setting \(F_T = 0\) therefore gives the minimum speed at the top. Solve \(mv^2/r = mg\) for \(v\): divide both sides by \(m\), multiply both sides by \(r\), and take the square root:
\[\frac{v^2}{r} = g \quad\Longrightarrow\quad v^2 = g r,\]
so
\[v_{\min} = \sqrt{g r}. \tag{6.9}\]
For the \(0.55\,\mathrm{m}\) string of the previous example, \(v_{\min} = \sqrt{(9.8\,\mathrm{m/s^2})(0.55\,\mathrm{m})} = \sqrt{5.39\,\mathrm{m^2/s^2}} \approx \boxed{2.3\,\mathrm{m/s}}\): far below the \(25\,\mathrm{m/s}\) used there, which is why that string stayed taut with a great deal to spare.
Two remarks. First, the mass cancels: a bowling ball and a marble on identical strings have the same minimum speed. Second, the same condition governs the water in a bucket swung overhead (the bucket’s bottom pushes inward exactly as the string pulls) and a roller-coaster car on the inside of a loop, where the normal force \(F_N\) replaces \(F_T\). A rigid rod or a car running on a grooved track is the exception: those can push outward as well as pull, so they carry the object around at any speed.
Example 6.8: The ideal speed for a banked curve
A curve of radius \(50\,\mathrm{m}\) is banked at \(15^\circ\). Find the “ideal” speed: the speed at which a car can round the curve with no friction required.
Solution
Step 1: Choose axes. With no friction, only two forces act on the car: gravity (down) and the normal force \(\vec{F}_N\) (perpendicular to the road). Resolve into horizontal and vertical axes: not along the incline this time, because the acceleration is horizontal, toward the center of the curve, and we want it to lie along an axis.
Step 2: Components of \(\vec{F}_N\). The road is tilted at \(\theta\) from the horizontal, so its perpendicular, \(\vec{F}_N\), is tilted at \(\theta\) from the vertical. The vertical axis is therefore adjacent to \(\theta\): \(F_N\) has a vertical component \(F_N\cos\theta\) and a horizontal component \(F_N\sin\theta\) pointing toward the center. The vertical components balance (the car neither rises nor sinks), and the horizontal component of \(\vec{F}_N\) provides the centripetal force:
\[\begin{aligned}\text{vertical:}\quad & F_N\cos\theta = mg, \\ \text{horizontal:}\quad & F_N\sin\theta = \frac{mv^2}{r}.\end{aligned}\]
Step 3: Divide one equation by the other. Two equations, and \(F_N\) is unknown. Rather than solving for \(F_N\) first, divide the horizontal equation by the vertical one, left side by left side and right side by right side. (Dividing equal quantities by equal quantities keeps them equal.) On the left, \(F_N\) cancels and \(\sin\theta/\cos\theta = \tan\theta\); on the right, \(m\) cancels:
\[\frac{F_N\sin\theta}{F_N\cos\theta} = \frac{mv^2/r}{mg} \quad\Longrightarrow\quad \tan\theta = \frac{v^2}{rg}.\]
Step 4: Solve for \(v\). Multiply both sides by \(rg\) and take the square root:
\[v = \sqrt{rg\tan\theta} = \sqrt{(50\,\mathrm{m})(9.8\,\mathrm{m/s^2})(0.268)} = \sqrt{131\,\mathrm{m^2/s^2}} \approx \boxed{11.5\,\mathrm{m/s}},\]
about \((11.5)(3.6) = 41\,\mathrm{km/h}\). Notice the ideal speed is independent of the car’s mass: \(m\) canceled in Step 3.
Check. As \(\theta \to 0\) (a flat road), \(\tan\theta \to 0\) and the ideal speed goes to zero: with no bank and no friction, no speed works except standing still. A steeper bank raises the ideal speed, which is why race tracks are banked more steeply than highway ramps.
Off the ideal speed. Real drivers do not all travel at \(v_{\rm ideal}\), and friction takes up the slack. Go faster and the normal force’s inward component is no longer enough, so static friction acts down the bank, adding its own inward component; go slower and the car tends to slide down toward the inside of the curve, so friction acts up the bank. Either way the analysis is the one above with a friction term included, and the result is a band of safe speeds rather than a single value, which is the whole point of banking a curve. One consequence is worth noting now: if the bank is shallow enough that \(\tan\theta \le \mu_s\), there is no minimum speed at all, and a car can sit parked on the curve without sliding. The challenge problems at the end of the chapter work the general case out in full.
Example 6.9: Whirling puck and a hanging weight
A puck of mass \(m_1\) slides in a circle of radius \(R\) on a frictionless tabletop. Its string runs through a small hole at the center and down to a hanging object of mass \(m_2\), which stays in equilibrium while the puck circles (Figure 6.4). Find symbolic expressions for (a) the string tension, (b) the puck’s speed, and (c) the puck’s period of revolution. (d) Describe what happens if \(m_2\) is increased.
Solution
(a) The hanging mass is in equilibrium, so the upward tension balances its weight:
\[F_T - m_2 g = 0 \quad\Longrightarrow\quad F_T = m_2 g.\]
(b) The only horizontal force on the puck is the string tension, pulling it toward the hole, that is, toward the center of its circle. The whole of the centripetal force is therefore supplied by \(F_T\), and the tension is the same at both ends of the string:
\[m_2 g = \frac{m_1 v^2}{R}.\]
To isolate \(v\), multiply both sides by \(R\), divide both sides by \(m_1\), and take the square root:
\[v^2 = \frac{m_2 g R}{m_1} \;\Longrightarrow\; v = \sqrt{\frac{m_2 g R}{m_1}}.\]
Two masses appear here, and it is worth being clear about which does what: \(m_2\) sets the size of the inward pull, while \(m_1\) is the inertia being pulled.
(c) From equation (6.7), \(T = 2\pi R/v\). Dividing by \(v\) means dividing by a square root, which is the same as multiplying by the square root of the reciprocal fraction:
\[T = \frac{2\pi R}{\sqrt{m_2 g R/m_1}} = 2\pi R\sqrt{\frac{m_1}{m_2 g R}}.\]
To simplify, move the \(R\) outside the root inside it. A factor outside a square root enters it squared, \(R = \sqrt{R^2}\), and then one \(R\) cancels against the \(R\) in the denominator:
\[T = 2\pi\sqrt{\frac{R^2\,m_1}{m_2 g R}} = 2\pi\sqrt{\frac{m_1 R}{m_2 g}}.\]
Check. Under the root, \(\,\mathrm{kg\cdot m}/(\,\mathrm{kg\cdot m/s^2}) = \,\mathrm{s^2}\), so \(T\) comes out in seconds. And the trends are sensible: a heavier hanging mass (\(m_2\) larger) pulls harder and shortens the period; a heavier puck (\(m_1\) larger) is harder to swing around and lengthens it.
(d) Adding load increases \(m_2\) and hence the inward pull, which now exceeds what is needed to hold the puck in its present circle. The puck is drawn inward, and as \(R\) shrinks it circles faster and on a tighter path. Strictly, the puck does not simply move to a new steady circle: with nothing to damp it, it overshoots and oscillates in and out while continuing to go around. The formula above applies to a genuine circular path, not to the transition between two of them.
Checkpoint 6.4
A passenger in a car complains of being “thrown outward” against the door as the car rounds a sharp curve. There is in fact no outward force on the passenger. Using Newton’s first and second laws, explain what the passenger actually feels and what role the door plays.
Answers to Checkpoints
Checkpoint 6.4. By the first law, the passenger’s body tends to keep moving in a straight line at constant speed. The car, however, curves inward. From the ground’s point of view, the passenger is not thrown outward; the car turns underneath the passenger until the door makes contact. The door then pushes inward on the passenger, and by the second law that inward push supplies the centripetal force \(mv^2/r\) needed to carry the passenger around the curve. What the passenger feels as being “thrown outward” is actually the door pressing inward.
This page titled 6.3: Uniform Circular Motion was last modified on Thu, 12 Nov 2026 04:26:49 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.