Opening the book…
An object is in static equilibrium when it is at rest and stays at rest. Two conditions must hold at once. First, the linear momentum of its center of mass is constant, meaning the net force is zero. Second, its angular momentum about any point is constant, meaning the net torque is zero:
Key Equation: Conditions for static equilibrium
\[\sum\vec{F} = 0 \qquad\text{and}\qquad \sum\vec{\tau} = 0. \tag{12.1}\]
The force condition is really one equation per direction (\(\sum F_x = 0\), \(\sum F_y = 0\)). The torque condition comes with a feature that makes statics problems tractable, and it is worth seeing exactly where it comes from. Compare the net torque about two different points \(O\) and \(P\). Every position vector shifts by the same fixed displacement \(\vec r_{O\to P}\), so
\[\sum\vec\tau_P = \sum\vec\tau_O + \vec r_{O\to P}\times\sum\vec F .\]
If the force condition already holds, the last term vanishes and the net torque is the same about every point. So once we have imposed \(\sum\vec F = 0\), checking \(\sum\vec\tau = 0\) about one point guarantees it about all of them, and we are free to pick whichever point makes the algebra easiest. Choosing the point where an unknown force acts gives that force zero lever arm, dropping it out of the torque equation entirely. That choice is often the whole solution.
A reliable strategy: draw a free-body diagram, write \(\sum F_x = 0\) and \(\sum F_y = 0\), then write \(\sum\tau = 0\) about a well-chosen point. Two habits matter here. First, the free-body diagram must be an extended one: unlike the point-particle diagrams of Chapter 5, where every arrow started at the same dot, each force must now be drawn at the location where it actually acts, because that location is what sets its lever arm. Second, fix a sign convention for torques (we take counterclockwise as positive) and stay with it. In simple problems it is quicker to set the clockwise torques equal to the counterclockwise ones, which is what the examples below do, but the signed form is what scales to complicated cases. The weight of an object is taken to act at its center of gravity (§12.2).
Note: How many unknowns can statics handle?
In two dimensions the equilibrium conditions supply exactly three independent equations: \(\sum F_x = 0\), \(\sum F_y = 0\), and \(\sum\tau = 0\). Writing the torque equation about a second point does not give a fourth: as we just showed, it is the same equation in disguise. So statics alone can determine at most three unknowns in a planar problem.
Structures with more unknowns than that are called statically indeterminate. A beam resting on three supports, or a table on four legs, is a familiar example: the equations cannot tell you how the load divides among the supports, because the answer depends on how much each support deflects. Solving such problems requires the elasticity of §12.3 in addition to the equilibrium conditions, and is a central topic of a mechanics-of-materials course. Every problem in this chapter is deliberately determinate.
Checkpoint 12.1
Two blocks, of masses \(m\) and \(M\), hang from cords wrapped around two different-sized disks fixed on a common axle (radii \(r\) and \(R\) respectively). Someone claims the system balances when \(mr^2 = MR^2\), reasoning from the moment of inertia \(I = mr^2\). Why is that wrong, and what is the actual condition for static equilibrium? (Hint: equilibrium is about torque, not rotational inertia.)
Checkpoint 12.2
A horizontal beam is pinned to a wall at its left end and held up by a cable at its right end; a load hangs somewhere in between. You want the cable tension, and you want it without ever solving for the pin force. About which point should you take torques, and why does that choice eliminate the pin force rather than merely simplify it?
Example 12.1: Balancing a rod on a fulcrum
A uniform rod of length \(50\,\mathrm{cm}\) and mass \(0.20\,\mathrm{kg}\) rests on a fulcrum \(40\,\mathrm{cm}\) from its left end. How far from the left end should a \(0.60\,\mathrm{kg}\) mass be hung to balance the rod?
Solution
Step 1: Locate the forces. The rod’s weight acts at its center, \(25\,\mathrm{cm}\) from the left, that is, \(40 - 25 = 15\,\mathrm{cm}\) to the left of the fulcrum. That weight tries to turn the rod counterclockwise, so the hung mass must sit to the right of the fulcrum to balance it. Let \(x\) be the mass’s distance from the left end; its lever arm about the fulcrum is then \(x - 0.40\) (in meters).
Step 2: Balance torques about the fulcrum. Choosing the fulcrum as the pivot point means the unknown support force there has zero lever arm and drops out. Counterclockwise torque equals clockwise torque:
\[m_{\rm rod}\,g\,(0.40 - 0.25) = m\,g\,(x - 0.40).\]
Step 3: Solve. The \(g\) appears on both sides, so divide it out. Then divide both sides by \(0.60\) and add \(0.40\):
\[(0.20)(0.15) = (0.60)(x - 0.40) \;\Longrightarrow\; x - 0.40 = \frac{0.030}{0.60} = 0.05 \;\Longrightarrow\; x = \boxed{0.45\,\mathrm{m}},\]
or \(45\,\mathrm{cm}\) from the left end.
Check. The hung mass is three times the rod’s mass, so it needs one-third the lever arm: \(15\,\mathrm{cm}/3 = 5\,\mathrm{cm}\) to the right of the fulcrum, which is \(45\,\mathrm{cm}\) from the left end. It also lies on the rod (\(45\,\mathrm{cm} < 50\,\mathrm{cm}\)), so the arrangement is possible.
Example 12.2: Beam supported by a cable
A uniform horizontal beam \(8.00\,\mathrm{m}\) long and weighing \(200\,\mathrm{N}\) is attached to a wall by a pin. Its far end is held by a cable making a \(53^\circ\) angle with the beam. A person weighing \(600\,\mathrm{N}\) stands \(2.00\,\mathrm{m}\) from the wall. Find the cable tension and the force the wall exerts on the beam.
Solution
Step 1: Torques about the pin. Take torques about the pin, which eliminates the unknown wall force (its lever arm is zero). Resolve the cable tension into components along and perpendicular to the beam. The component along the beam, \(F_T\cos 53^\circ\), points straight at the pin and has no lever arm; only the perpendicular component, \(F_T\sin 53^\circ\), produces a torque, acting at the far end (\(8.00\,\mathrm{m}\)). The two weights act downward, the beam’s at its center (\(4.00\,\mathrm{m}\)) and the person’s at \(2.00\,\mathrm{m}\). The cable’s torque (counterclockwise) balances the two weights’ torques (clockwise):
\[F_T\sin 53^\circ\,(8.00\ \,\mathrm{m}) = (200\ \,\mathrm{N})(4.00\ \,\mathrm{m}) + (600\ \,\mathrm{N})(2.00\ \,\mathrm{m}) = 2000\ \,\mathrm{N\cdot m}.\]
Divide both sides by \((8.00\ \,\mathrm{m})\sin 53^\circ\):
\[F_T = \frac{2000\ \,\mathrm{N\cdot m}}{(8.00\ \,\mathrm{m})(0.799)} \approx \boxed{313\,\mathrm{N}}.\]
Step 2: The wall force. Now the force conditions give the wall force. A pin can push in any direction (it is not restricted to pushing along the beam, a common first guess), so we treat its force as two unknown components, horizontal \(F_{{\rm wall},x}\) and vertical \(F_{{\rm wall},y}\), and recover the direction at the end.
Horizontally, the cable’s horizontal component \(F_T\cos 53^\circ\) pulls the beam toward the wall, so the pin must push outward by the same amount:
\[F_{{\rm wall},x} = F_T\cos 53^\circ = (313\,\mathrm{N})(0.602) \approx 188\,\mathrm{N}.\]
Vertically, upward forces balance downward ones: \(F_{{\rm wall},y} + F_T\sin 53^\circ = 200 + 600\). From Step 1, \(F_T\sin 53^\circ = 2000/8.00 = 250\,\mathrm{N}\) exactly, so subtracting it from both sides,
\[F_{{\rm wall},y} = 800 - 250 = 550\,\mathrm{N}.\]
Step 3: Magnitude and direction. The two components are perpendicular, so they combine by the Pythagorean theorem, and the angle above the horizontal has \(F_{{\rm wall},y}\) opposite and \(F_{{\rm wall},x}\) adjacent:
\[\begin{aligned}F_{\rm wall} &= \sqrt{F_{ {\rm wall},x}^2 + F_{ {\rm wall},y}^2} = \sqrt{(188)^2 + (550)^2}\,\mathrm{N} \approx \boxed{581\,\mathrm{N} }, \\ \theta &= \arctan\frac{F_{ {\rm wall},y} }{F_{ {\rm wall},x} } = \arctan\frac{550}{188} \approx \boxed{71^\circ \text{ above horizontal} }.\end{aligned}\]
Check. Any point can serve as the pivot in equilibrium. Take torques about the cable’s end of the beam instead: now \(F_T\) drops out, and \(F_{{\rm wall},y}\) (at \(8.00\,\mathrm{m}\)) must balance the beam’s weight (at \(4.00\,\mathrm{m}\) from that end) and the person’s (at \(6.00\,\mathrm{m}\)): \(8.00\,V = (200)(4.00) + (600)(6.00) = 4400\), so \(F_{{\rm wall},y} = 550\,\mathrm{N}\) in one step. ✓
Example 12.3: A ladder against a smooth wall
A uniform ladder of length \(\ell\) and mass \(m\) leans against a frictionless vertical wall. The coefficient of static friction with the ground is \(\mu_s = 0.40\). Find the minimum angle with the ground at which the ladder will not slip.
Solution
Step 1: The forces. Four forces act: the ladder’s weight \(mg\) at its center; the ground’s normal \(F_{N,g}\) (up) and friction \(F_f\) (toward the wall, since the base tends to slide out); and the wall’s normal \(F_{N,w}\) (away from the wall; no friction, since the wall is smooth).
Step 2: Force conditions. Vertically, only \(F_{N,g}\) and the weight act; horizontally, only \(F_f\) and \(F_{N,w}\):
\[F_{N,g} = mg, \qquad F_f = F_{N,w}.\]
Step 3: Torques about the base. Choosing the base as the pivot eliminates both \(F_{N,g}\) and \(F_f\), which act there. For each remaining force the lever arm is the perpendicular distance from the base to the force’s line of action. The wall’s normal is horizontal and acts at the top, so its lever arm is the height of the top, \(\ell\sin\theta\). The weight is vertical and acts at the center, so its lever arm is the horizontal distance to the center, \(\tfrac{\ell}{2}\cos\theta\). Balancing,
\[F_{N,w}\,(\ell\sin\theta) = mg\,\tfrac{\ell}{2}\cos\theta.\]
Divide both sides by \(\ell\sin\theta\); the length cancels, and \(\cos\theta/\sin\theta = 1/\tan\theta\):
\[F_{N,w} = \frac{mg}{2}\cdot\frac{\cos\theta}{\sin\theta} = \frac{mg}{2\tan\theta}.\]
Step 4: The slipping condition. The ladder is on the verge of slipping when friction reaches its maximum, \(F_f = \mu_s F_{N,g} = \mu_s mg\). Setting \(F_f = F_{N,w}\) and canceling \(mg\) from both sides:
\[\mu_s mg = \frac{mg}{2\tan\theta} \;\Longrightarrow\; \mu_s = \frac{1}{2\tan\theta}.\]
Multiply both sides by \(\tan\theta\) and divide by \(\mu_s\):
\[\tan\theta = \frac{1}{2\mu_s}, \qquad \theta_{\min} = \arctan\frac{1}{2(0.40)} = \arctan 1.25 \approx \boxed{51^\circ}.\]
Below this angle the ladder slides; the result is independent of the ladder’s mass and length.
Check. A shallower ladder has a larger \(\cos\theta\) and smaller \(\sin\theta\), so the weight’s lever arm grows while the wall’s shrinks; \(F_{N,w}\), and hence the friction needed, rises. That is why ladders slip when leaned too far. With a perfectly slippery floor (\(\mu_s \to 0\)), \(\tan\theta \to \infty\) and \(\theta_{\min} \to 90^\circ\): the ladder would have to stand vertical.
Example 12.4: A strut and a rope
A uniform strut of weight \(780\,\mathrm{N}\) is pinned to a wall at its lower end and rises at \(60^\circ\) above the horizontal. A load \(F_{g,{\rm load}} = 815\,\mathrm{N}\) hangs from its upper end, and a rope attached at that same end (perpendicular to the strut) runs back to the wall. Find the tension in the rope.
Solution
Step 1: Choose the pivot. Take torques about the pin \(P\), eliminating the unknown wall force.
Step 2: Lever arms. The rope is perpendicular to the strut, so its lever arm is the full length \(L\): its torque is \(F_T L\). The strut’s weight acts at its center (distance \(L/2\) along the strut) and the load at the end (distance \(L\)). Both of these forces are vertical, so their lever arms about \(P\) are not the distances along the strut but the horizontal distances from \(P\) to their lines of action. The strut rises at \(60^\circ\), so the horizontal distance to a point a distance \(s\) along it is \(s\cos 60^\circ\) (the side adjacent to the angle): \(\tfrac{L}{2}\cos 60^\circ\) and \(L\cos 60^\circ\).
Step 3: Balance torques. The rope’s torque balances the torques of the two weights:
\[F_T L = F_{g,{\rm load}}\,(L\cos 60^\circ) + F_{g,{\rm strut}}\left(\tfrac{L}{2}\cos 60^\circ\right).\]
Every term contains \(L\), so divide it out: the answer cannot depend on the strut’s length. Then factor \(\cos 60^\circ\) out of the right side:
\[\begin{aligned}F_T &= \left(F_{g,{\rm load}} + \tfrac{1}{2}F_{g,{\rm strut}}\right)\cos 60^\circ = \left(815 + \tfrac{1}{2}(780)\right)(0.500)\,\mathrm{N} \\ &= (815 + 390)(0.500)\,\mathrm{N} \approx \boxed{603\,\mathrm{N}}.\end{aligned}\]
The strut’s weight counts only half as much as the load because it acts, in effect, halfway along the strut.
Answers to Checkpoints
Checkpoint 12.1. Static equilibrium requires zero net torque; moment of inertia only matters when the system has an angular acceleration, which here it does not. Each cord pulls tangentially at its disk’s rim, so the two torques are \(mg\,r\) and \(Mg\,R\), and balance requires \(mgr = MgR\), that is, \(mr = MR\). The lever arm enters to the first power, not squared: the heavier block must hang from the smaller disk in inverse proportion to the radii.
Checkpoint 12.2. Take torques about the pin. The pin force acts at the pin, so whatever its size and direction, its lever arm about that point is zero and its torque vanishes exactly. It does not appear in the torque equation at all, so the only unknown left is the cable tension. This is the general strategy: choose the pivot at the point where the most unknown forces act.
This page titled 12.1: Equilibrium was last modified on Thu, 12 Nov 2026 04:26:48 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.