31.3: Polarization

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    31.3: Polarization
    Two panels of wavefronts and rays: a plane wave and spherical waves from a point source.
    Figure 31.2. Wavefronts (blue) and rays (red). Rays are drawn perpendicular to the wavefronts, in the direction the wave travels. (a) A plane wave has parallel rays. (b) Spherical waves from a small source have rays that radiate outward from it.
    Figure descriptionTwo panels showing wavefronts and rays. In panel a, a plane wave is drawn as a set of parallel, evenly spaced vertical lines, the wavefronts, with horizontal arrows, the rays, crossing them at right angles and pointing to the right. In panel b, a small point source at the left sends out circular arcs, the spherical wavefronts, with straight arrows radiating outward from the source, the rays, crossing every arc at right angles.

    A wavefront is a surface of constant phase, and the direction in which the wave travels is perpendicular to it everywhere. A line drawn in that direction, always perpendicular to the wavefronts, is called a ray. For a plane wave the rays are parallel straight lines. For the spherical wavefronts spreading from a small source they are straight lines radiating outward from the source (Figure 31.2). A ray is not a physical object. It is a way of summarizing where the wave’s energy goes.

    The ray approximation is the assumption that light travels along straight rays in any uniform medium, changing direction only where it meets a surface, where it reflects or refracts. The study of light in this approximation is called ray optics, or geometric optics, because it reduces optics to geometry: drawing straight lines and measuring angles.

    When is the approximation valid? The previous section gave the answer. A wave passing through an opening or past an edge spreads sideways, diffracting into the geometric shadow, but only by an angle of roughly

    \[\theta \sim \frac{\lambda}{a}, \tag{31.1}\]

    where \(a\) is the width of the opening. Chapter 34 makes this precise. When the openings and objects the light meets are much larger than its wavelength, \(a \gg \lambda\), the spreading is negligible, the light travels in straight lines, and objects cast sharp shadows. Ray optics is the limit of wave optics when the wavelength is small compared with everything the light encounters. Visible light has wavelengths below a micrometer, so for mirrors, lenses, windows, and eyes, all millimeters to meters in size, the ray approximation is excellent, and it is the model used in the rest of this chapter and in Chapter 32. When light passes through openings comparable to its wavelength, such as narrow slits, fine gratings, and tiny apertures, rays fail and the wave nature takes over. Those effects are the subject of Chapters 33 and 34.

    Example 31.1: How well does a laser beam stay straight?

    A red laser beam of wavelength \(633\,\mathrm{nm}\) leaves the laser through a circular opening \(2.0\,\mathrm{mm}\) across. Estimate the angle through which the beam spreads by diffraction, and how much wider it is after traveling \(100\,\mathrm{m}\).

    Solution

    From equation (31.1),

    \[\theta \sim \frac{\lambda}{a} = \frac{633\times10^{-9}\,\mathrm{m}}{2.0\times10^{-3}\,\mathrm{m}} \approx \boxed{3\times 10^{-4}\,\mathrm{rad}},\]

    about \(0.02^\circ\). Over \(100\,\mathrm{m}\) the beam’s edges spread by roughly \((100\,\mathrm{m})(3\times10^{-4}) = 3\,\mathrm{cm}\) on each side, so the spot is several centimeters across. That is small compared with the distance traveled, which is why a laser beam looks like a straight line, the ideal of a ray. But it is not zero, and no beam of finite width can be perfectly parallel. The wave nature of light is always there. Ray optics simply ignores it when it is small.

    Checkpoint 31.2

    A pinhole camera is a light-tight box with a tiny hole in one side and film (or a sensor) on the opposite side. (a) Using rays, explain why a smaller pinhole gives a sharper image. (b) Using equation (31.1), explain why making the pinhole smaller and smaller eventually makes the image blurrier again. (c) Where does the ray approximation break down in this camera?

    Answer

    Answers to Checkpoints

    Checkpoint 31.2. (a) Each point of the object sends light through the pinhole to a small patch on the film, the size of the hole. A smaller hole shrinks every patch, so neighboring points overlap less and the image is sharper. (b) The light spreads by diffraction through an angle \(\theta \sim \lambda/a\), which grows as the hole width \(a\) shrinks. Below some size the diffraction spread on the film outweighs the geometric patch, and the image blurs again. (c) The ray approximation fails when the hole is no longer much larger than the scale set by diffraction, when the spread \(L\lambda/a\) across the box of depth \(L\) becomes comparable to the hole size \(a\) itself. The sharpest image comes from a pinhole near that crossover, \(a \sim \sqrt{L\lambda}\), a fraction of a millimeter for a typical box.


    This page titled 31.3: Polarization was last modified on Thu, 12 Nov 2026 04:26:55 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.