10.2: Rolling Motion

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    10.2: Rolling Motion

    Section 10.1 treated a body turning about a fixed axis. A wheel rolling along a road is different, because its axis moves too. A rolling wheel is doing two things at once: its center moves forward (translation) while the wheel turns about that center (rotation). The two are locked together by the condition of rolling without slipping. In one full turn the wheel advances exactly one circumference, \(2\pi R\); for any angle \(\theta\), measured in radians, it advances an arc length \(s = R\theta\). Differentiating ties the center-of-mass speed to the angular speed, and differentiating again ties the accelerations:

    Key Equation: Rolling without slipping

    \[x_{\rm cm} = R\theta, \qquad v_{\rm cm} = R\omega, \qquad a_{\rm cm} = R\alpha. \tag{10.9}\]

    Rolling without slipping shown as translation combined with rotation.
    Figure 10.2. Rolling without slipping as translation plus rotation. The center moves at \(v_{\rm cm}\), the top at \(2v_{\rm cm}\), and the contact point at the bottom is instantaneously at rest.
    Figure descriptionRolling without slipping shown as translation combined with rotation. The center of the wheel moves at v sub cm, the top point at twice v sub cm, and the contact point at the ground is instantaneously at rest.

    A useful way to picture rolling is to add the two motions point by point (Figure 10.2). The pure translation gives every point the velocity \(v_{\rm cm}\); the pure rotation gives the top of the wheel a forward velocity \(R\omega = v_{\rm cm}\) and the bottom a backward velocity of the same size. Adding them, the top of the wheel moves at \(2v_{\rm cm}\) while the contact point at the bottom is, for that instant, at rest, which is exactly why a rolling wheel does not skid.

    Rolling without slipping is a purely kinematic condition: it says how a rolling body’s motion is shared between translation and rotation, but not what makes the body roll or how much energy it carries. Both questions need ideas we have not met yet. Section 10.4 uses the moment of inertia and torque to find how fast a body rolls down a ramp, and Section 11.1 in Chapter 11 finds the kinetic energy of a rolling body.

    Checkpoint 10.2

    A car drives past you at \(25\,\mathrm{m/s}\) without its tires slipping.

    1. How fast is the top of a tire moving relative to the road?
    2. How fast is the patch of tread touching the road moving relative to the road?
    3. A point on the front edge of the tire, level with the axle, is moving at what speed, and in what direction?

    Answer

    Answers to Checkpoints

    Checkpoint 10.2. Every point on the tire moves with the axle’s forward velocity \(v_{\rm cm} = 25\,\mathrm{m/s}\) plus a rotational velocity of size \(\omega R = v_{\rm cm}\) tangent to the tire. (a) At the top the two point the same way and add: \(2v_{\rm cm} = 50\,\mathrm{m/s}\). (b) At the bottom they cancel exactly: the contact patch is momentarily at rest relative to the road; that is what “not slipping” means. (c) At the front, level with the axle, the rotational velocity points straight down (for a wheel rolling forward), perpendicular to the forward velocity. The two combine to \(\sqrt{25^2 + 25^2} = 25\sqrt{2} \approx 35\,\mathrm{m/s}\), directed \(45^\circ\) below the forward direction.


    This page titled 10.2: Rolling Motion was last modified on Thu, 12 Nov 2026 04:26:58 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.