Opening the book…
To speed up a rotating body, to increase its rotational kinetic energy, a torque must do work on it, just as a force does work to change translational kinetic energy. As a torque turns a body through a small angle \(d\theta\), it does work \(\tau\,d\theta\), so in general \(W = \int\tau\,d\theta\), and for a constant torque this is simply
Key Equation: Work done by a torque
\[W = \tau\,\Delta\theta, \qquad W_{\rm net} = \Delta K_{\rm rot} = \tfrac{1}{2}I\omega^{2} - \tfrac{1}{2}I\omega_0^{2}. \tag{11.3}\]
The second statement is the work–kinetic energy theorem in rotational form: the net work done by all the torques equals the change in rotational kinetic energy, exactly mirroring \(W_{\rm net} = \Delta K\) from Chapter 8. Keep the two apart. The quantity \(W = \tau\,\Delta\theta\) is the work done by a single torque; only when that torque is the only one acting is it also the net work.
Example 11.2: Spinning up a potter’s wheel
A potter’s wheel with moment of inertia \(0.30\,\mathrm{kg\cdot m^2}\) starts from rest. A constant torque of \(18\,\mathrm{N\cdot m}\) acts through an angular displacement of \(5.0\,\mathrm{rad}\). Find the work done and the wheel’s final angular speed.
Solution
Work. For a constant torque acting through an angle, the rotational analog of \(W = Fd\) is
\[W = \tau\,\Delta\theta = (18\,\mathrm{N\cdot m})(5.0\,\mathrm{rad}) = 90\,\mathrm{J}.\]
(The radian is dimensionless, so \(\,\mathrm{N\cdot m}\) times radians is simply joules.)
Final speed. By the rotational work–kinetic energy theorem, with \(\omega_i = 0\), all of this work becomes rotational kinetic energy. Multiply both sides by \(2\), divide by \(I\), and take the square root:
\[W = \tfrac{1}{2}I\omega_f^2 \;\Longrightarrow\; \omega_f^2 = \frac{2W}{I} \;\Longrightarrow\; \omega_f = \sqrt{\frac{2W}{I}},\]
so
\[\omega_f = \sqrt{\frac{2(90\,\mathrm{J})}{0.30\,\mathrm{kg\cdot m^2}}} = \sqrt{600\,\mathrm{s^{-2}}} \approx \boxed{24\,\mathrm{rad/s}}.\]
Check. Do it with rotational kinematics instead. The angular acceleration is \(\alpha = \tau/I = 18/0.30 = 60\,\mathrm{rad/s^2}\), and \(\omega_f^2 = \omega_i^2 + 2\alpha\,\Delta\theta = 0 + 2(60)(5.0) = 600\,\mathrm{rad^2/s^2}\): the same \(\sqrt{600}\). This is exactly parallel to the linear example “Speed from net work” in Chapter 8.
Checkpoint 11.2
A motor drives a wheel with a constant torque while a friction torque half that size opposes the motion, and the wheel turns through an angle \(\Delta\theta\).
- What is the sign of the work done by each of the two torques?
- Which quantity equals \(\Delta K_{\rm rot}\): the motor’s work, or the net work?
- If the two torques were instead equal in size, what would the wheel’s angular speed be doing?
A torque that keeps acting delivers energy at some rate, and the rotational partner of \(P = Fv\) drops straight out of \(W = \tau\,\Delta\theta\). Divide the work by the time taken, and the angular displacement per unit time is simply the angular velocity:
Key Equation: Power delivered by a torque
\[P = \tau\omega. \tag{11.4}\]
With \(\tau\) in newton-meters and \(\omega\) in radians per second, \(P\) comes out in watts. This equation is why motors and engines are always rated by torque and speed together rather than by either alone: a given power can be delivered as a large torque at a low speed or a small torque at a high speed, which is exactly what a gearbox trades between.
The parallel between translation and rotation, which has run through this chapter and the last, is worth collecting in one place (Table 11.1). Every rotational law is its linear counterpart with the matching symbols swapped in.
| Translation | Rotation |
|---|---|
| position \(x\) | angle \(\theta\) |
| velocity \(v\) | angular velocity \(\omega\) |
| acceleration \(a\) | angular acceleration \(\alpha\) |
| mass \(m\) | moment of inertia \(I\) |
| force \(F\) | torque \(\tau\) |
| \(\sum F = ma\) | \(\sum\tau = I\alpha\) |
| \(K = \tfrac{1}{2}mv^2\) | \(K_{\rm rot} = \tfrac{1}{2}I\omega^2\) |
| \(W = Fd\) | \(W = \tau\,\Delta\theta\) |
| \(P = Fv\) | \(P = \tau\omega\) |
Answers to Checkpoints
Checkpoint 11.2. (a) The motor’s torque acts in the direction of rotation, so its work is positive; the friction torque opposes the rotation, so its work is negative. (b) The net work (the sum of the two, here half the motor’s work) equals \(\Delta K_{\rm rot}\), just as the net work on a particle equals its \(\Delta K\). (c) Equal and opposite torques do zero net work, so the rotational kinetic energy does not change: the wheel turns at constant angular speed.
This page titled 11.2: Rotational Work was last modified on Thu, 12 Nov 2026 04:26:53 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.