Opening the book…
Difficulty key: ★ introductory, ★★ standard, ★★★ challenging.
Section 10.1 — Rotational Kinematics
10.1 ★ A wheel turns through \(12\,\mathrm{rad}\) in \(3.0\,\mathrm{s}\) at constant angular velocity.
- What is its angular velocity in rad/s?
- How many revolutions is \(12\,\mathrm{rad}\)?
10.2 ★ [Conceptual.] A merry-go-round turns at a steady rate. Compare, for a child near the center and a child at the outer edge: (a) their angular velocities, and (b) their linear (tangential) speeds. Explain using \(v = r\omega\).
10.3 ★★ A centrifuge accelerates from rest to \(12000\,\mathrm{rpm}\) in \(4.0\,\mathrm{s}\) at constant angular acceleration.
- Find the angular acceleration in rad/s2.
- Through how many revolutions does it turn during this time?
Section 10.2 — Rolling Motion
10.4 ★ A wheel of radius \(0.35\,\mathrm{m}\) rolls without slipping at a center-of-mass speed of \(8.0\,\mathrm{m/s}\).
- What is its angular speed?
- What is the speed of the point at the top of the wheel?
10.5 ★★ [Real-world: transportation.] A car’s tires have radius \(0.33\,\mathrm{m}\). The car accelerates from rest to \(27\,\mathrm{m/s}\) in \(9.0\,\mathrm{s}\).
- Find the final angular velocity of a tire.
- Find the angular acceleration of a tire.
Section 10.3 — Rotational Inertia
10.6 ★ Two \(0.50\,\mathrm{kg}\) masses are attached to the ends of a light rod of length \(1.2\,\mathrm{m}\). Find the moment of inertia of this dumbbell about an axis through its center, perpendicular to the rod.
10.7 ★★ [Conceptual.] A solid disk and a thin hoop have the same mass and radius.
- Which has the larger moment of inertia about its central axis? Why?
- If the same torque is applied to each, which gains angular speed faster?
10.8 ★★ Four \(2.0\,\mathrm{kg}\) point masses sit at the corners of a square of side \(1.0\,\mathrm{m}\). Find the moment of inertia about an axis perpendicular to the square through its center. (Each corner is the same distance from the center.)
10.9 ★★★ Using \(I = \int r^2\,dm\), show that the moment of inertia of a uniform thin hoop of mass \(M\) and radius \(R\) about its central axis is \(MR^2\), and explain why this is the largest possible value of \(I\) for any body of that mass and radius.
Section 10.4 — Torque and the Right-Hand Rule
10.10 ★ A mechanic pushes with \(180\,\mathrm{N}\) at the end of a wrench \(0.25\,\mathrm{m}\) long, perpendicular to the handle. What torque is applied to the bolt?
10.11 ★ [Conceptual.] Explain why a door is much easier to open when you push near the outer edge than near the hinges, and why pushing straight toward the hinges does nothing at all. Use the idea of the lever arm.
10.12 ★★ A light rod \(0.60\,\mathrm{m}\) long is pivoted at one end. A \(40\,\mathrm{N}\) force pulls on the free end at an angle of \(30^\circ\) to the rod.
- Find \(F_\perp\), the component of the force perpendicular to the rod, and use it to find the torque about the pivot.
- Now keep the whole force and find \(r_\perp\), the perpendicular distance from the pivot to the line along which the force acts. Use it to find the torque again. Do the two methods agree?
- The force is turned so that it pulls straight along the rod, away from the pivot. What are \(F_\perp\), \(r_\perp\) and the torque now?
10.13 ★★★ A \(15\,\mathrm{N}\) force is applied at the end of a \(0.40\,\mathrm{m}\) wrench. Find the torque magnitude if the force is applied (a) perpendicular to the wrench, (b) at \(60^\circ\) to the wrench, and (c) along the wrench. Comment on the trend.
10.14 ★ A position vector \(\vec r = (3.0\,\hat\imath)\,\mathrm{m}\) locates the point where a force \(\vec F = (4.0\,\hat\jmath)\,\mathrm{N}\) is applied. Find the torque \(\vec\tau = \vec r\times\vec F\), including its direction.
10.15 ★ [Conceptual.] You loosen a bolt by pushing down on the end of a horizontal wrench. Use the right-hand rule to determine the direction of the torque vector, and explain how it relates to which way the bolt turns.
10.16 ★★ A force \(\vec F = (2.0\,\hat\imath + 5.0\,\hat\jmath)\,\mathrm{N}\) acts at the point \(\vec r = (4.0\,\hat\imath - 1.0\,\hat\jmath)\,\mathrm{m}\). Find the torque about the origin (magnitude and direction).
10.17 ★★★ A grindstone is a solid disk of mass \(8.0\,\mathrm{kg}\) and radius \(0.20\,\mathrm{m}\). A constant torque gives it an angular acceleration of \(6.0\,\mathrm{rad/s^2}\).
- Find the moment of inertia of the grindstone.
- Find the applied torque.
- What tangential force at the rim would produce this torque?
10.18 ★★★ [Real-world: engineering.] A bucket of mass \(3.0\,\mathrm{kg}\) hangs from a light rope wound around a solid cylindrical drum of mass \(5.0\,\mathrm{kg}\) and radius \(0.15\,\mathrm{m}\) on a frictionless axle. The bucket is released from rest. Find the bucket’s acceleration and the rope tension. (Use \(I = \tfrac{1}{2}MR^2\) for the drum.)
Challenge Problems
10.19 ★★★ A uniform solid disk of mass \(M\) and radius \(R\) can be built up out of thin concentric rings. A ring of radius \(r\) and width \(dr\) has area \(2\pi r\,dr\), and every point on it lies the same distance \(r\) from the central axis.
- Write the mass \(dm\) of such a ring in terms of \(M\), \(R\), \(r\), and \(dr\).
- Use this with \(I = \int r^2\,dm\) to show that the disk’s moment of inertia about its central axis is \(\tfrac{1}{2}MR^2\), as claimed in Table 10.1.
- Now suppose the disk is not uniform: its area density grows linearly with radius, \(\sigma(r) = \sigma_0 r/R\). Show that its moment of inertia about the same axis is \(\tfrac{3}{5}MR^2\), and explain in one sentence why this had to come out larger than \(\tfrac{1}{2}MR^2\).
10.20 ★★★ A solid cylinder (\(I = \tfrac12 MR^2\)) of mass \(4.0\,\mathrm{kg}\) and radius \(0.10\,\mathrm{m}\) rolls without slipping down an incline of angle \(30^\circ\).
- Using Newton’s second law for translation and rotation together, find the acceleration of its center of mass.
- Find the friction force acting on the cylinder.
- What is the minimum coefficient of static friction needed to prevent slipping?
This page titled 10.E: Rotation I (Problems) was last modified on Thu, 12 Nov 2026 04:26:58 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by .
The book could not be loaded just now.