10.S: Rotation I (Summary)

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    10.S: Rotation I (Summary)

    Summary

    • Rotation is described by angular displacement \(\theta\), angular velocity \(\omega\), and angular acceleration \(\alpha\). Linear and angular quantities are linked by \(s = r\theta\), \(v = r\omega\), \(a_t = r\alpha\), and \(a_c = r\omega^2\), every one of which requires the angle in radians.
    • For constant \(\alpha\), the rotational kinematic equations match the linear ones with angular symbols substituted.
    • In rolling without slipping, \(v_{\rm cm} = R\omega\) and \(a_{\rm cm} = R\alpha\); the contact point is instantaneously at rest and the top of the body moves at \(2v_{\rm cm}\).
    • Moment of inertia \(I = \sum m_i r_i^2 = \int r^2\,dm\) measures resistance to angular acceleration; it depends on how mass is distributed about the axis, not just on the amount of mass.
    • The parallel-axis theorem \(I = I_{\rm cm} + Md^2\) gives \(I\) about any axis parallel to one through the center of mass; \(I\) is always smallest about the center of mass itself.
    • Torque \(\tau = rF\sin\theta = r_\perp F = rF_\perp\) is the rotational effect of a force: only the perpendicular part of the force does any turning. As a vector, \(\vec\tau = \vec r\times\vec F\), with direction set by the right-hand rule (out of the page for counterclockwise). Angular velocity \(\vec\omega\) is a vector by the same rule.
    • Newton’s second law for rotation is \(\sum\tau = I\alpha\), with both sides referred to the same fixed axis, or to the center of mass even when it accelerates.
    • Static friction supplies the torque that spins a body up on a ramp. Writing \(I_{\rm cm} = \beta mR^2\), a body rolling down an incline has \(a_{\rm cm} = g\sin\theta/(1+\beta)\) and requires \(\mu_s \ge \beta\tan\theta/(1+\beta)\): results that depend on the shape factor \(\beta\) but on neither the mass nor the radius.

    Key Equations

    Relating linear and angular motion

    \[s = r\theta, \qquad v = r\omega, \qquad a_t = r\alpha, \qquad a_c = r\omega^2 = \frac{v^2}{r}\]

    Rotational kinematic equations (constant \(\alpha\))

    \[\begin{aligned} \omega &= \omega_0 + \alpha\,t, \\ \Delta\theta &= \omega_0\,t + \tfrac{1}{2}\alpha\,t^{2}, \\ \omega^{2} &= \omega_0^{2} + 2\alpha\,\Delta\theta, \\ \Delta\theta &= \tfrac{1}{2}(\omega + \omega_0)\,t \end{aligned}\]

    Rolling without slipping

    \[x_{\rm cm} = R\theta, \qquad v_{\rm cm} = R\omega, \qquad a_{\rm cm} = R\alpha\]

    Moment of inertia

    \[I = \sum_i m_i r_i^2 \quad\text{(particles)}, \qquad I = \int r^2\,dm \quad\text{(continuous body)}\]

    Parallel-axis theorem

    \[I = I_{\rm cm} + Md^{2}\]

    Torque

    \[\tau = rF\sin\theta = r_\perp F\]

    Torque as a vector

    \[\vec{\tau} = \vec{r}\times\vec{F}, \qquad |\vec{\tau}| = rF\sin\theta\]

    Newton’s second law for rotation

    \[\sum\tau = I\alpha\]

    Rolling down an incline

    \[a_{\rm cm} = \frac{g\sin\theta}{1+\beta}, \qquad F_f = \frac{\beta}{1+\beta}\,mg\sin\theta, \qquad \mu_s \ge \frac{\beta\tan\theta}{1+\beta}\]


    This page titled 10.S: Rotation I (Summary) was last modified on Thu, 12 Nov 2026 04:25:29 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.