Opening the book…
Almost every mechanics problem in this book is built from just a handful of forces. It is worth meeting them one at a time.
Weight
The weight of an object is the gravitational force the Earth exerts on it. We will study gravity in depth in Chapter 13; for now we need only that, near the Earth’s surface, the weight points straight down and has magnitude
Key Equation: Weight
\[\vec{F}_g = m\,\vec{g}, \qquad F_g = mg, \tag{5.5}\]
where \(g = 9.8\,\mathrm{m/s^2}\) is the free-fall acceleration. Many texts write the weight as \(W\); we will write it \(\vec{F}_g\) throughout, both to leave the symbol \(W\) free for the work of Chapter 7 and to make plain at a glance that weight is a force. The other forces follow the same pattern, an \(F\) with a subscript that names the force: \(\vec{F}_N\) for the normal force, \(\vec{F}_T\) for tension, and, in Chapter 6, \(\vec{F}_f\) for friction.
Weight and mass are not the same thing. Mass is an intrinsic measure of an object’s inertia, the same everywhere in the universe; it is measured in kilograms. Weight is a force (the local gravitational pull on that mass) measured in newtons, and it depends on where you are. A \(2.0\,\mathrm{kg}\) textbook has a mass of \(2.0\,\mathrm{kg}\) on the Earth, on the Moon, and in deep space. Its weight is about \(19.6\,\mathrm{N}\) on Earth, roughly \(3.2\,\mathrm{N}\) on the Moon, and very nearly zero far from any star or planet.
Everyday units blur the distinction, because the pound is a unit of force, not of mass: \(1\,\mathrm{lb} = 4.45\,\mathrm{N}\). A “150-pound person” therefore weighs about \(670\,\mathrm{N}\) and has a mass of roughly \(68\,\mathrm{kg}\). A bathroom scale marked in both pounds and kilograms is quietly doing that conversion for you, using an assumed value of \(g\), which is why it would mislead you on the Moon, where the pounds reading would fall to about 25 while the true mass, 68 kilograms, would not change at all.
The normal force
When an object presses against a surface, the surface pushes back. This contact force is the normal force \(\vec{F}_N\). The word “normal” here means perpendicular: the normal force always points perpendicular to the surface, away from it.
Two cautions. First, the normal force is not always vertical, and it is not always equal to the weight. On a ramp it points perpendicular to the ramp, not straight up, and its magnitude is whatever value is required to prevent the object from sinking through the surface: a value we find by applying the second law perpendicular to the surface, not by assuming \(F_N = mg\). On level ground with nothing else pushing down, it happens that \(F_N = mg\); on an incline, or when someone also presses down on the object, it does not. Second, the normal force is a passive, responsive force: it is as large as it needs to be, up to the point where the surface breaks.
Friction
Friction is a contact force directed parallel to the surface, opposing the relative motion, or the tendency toward relative motion, of the surfaces in contact. It is friction that brings Galileo’s rolling ball to rest and that lets your shoes grip the floor when you walk. Because friction deserves a careful, quantitative treatment of its own, we postpone the details (static versus kinetic friction, and the coefficient \(\mu\)) to Chapter 6. In this chapter we will never have to compute a friction force: every surface in the worked examples is taken to be frictionless, so that we can concentrate on the structure of Newton’s laws without that complication. You should still draw a friction arrow on the free-body diagram of any object sitting on a surface described as rough.
Tension
Tension is the force transmitted along a cable, rope, wire, or string when it is pulled taut by forces acting at its two ends. It is directed along the length of the cable and pulls inward on whatever is attached at each end. We will idealize cords as massless and inextensible unless stated otherwise; for such an ideal cord the tension is the same at every point along its length, and it pulls equally hard on the objects at the two ends.
A pulley redirects a tension. An ideal pulley (massless and frictionless) changes only the direction of the rope passing over it, not the magnitude of the tension: the tension is the same on both sides. This is what allows a single cord over a pulley to connect two objects that move in different directions, as in the Atwood machine of Example 5.6 below.
Checkpoint 5.2
A \(5.0\,\mathrm{kg}\) box sits at rest on a horizontal table while you press straight down on the top of the box with your hand. Is the normal force the table exerts on the box equal to the box’s weight? Explain why or why not.
Answers to Checkpoints
Checkpoint 5.2. No. Three forces act on the box: its weight \(mg = 49\,\mathrm{N}\) down, your push \(F_P\) down, and the normal force \(F_N\) up. The box is in equilibrium, so \(F_N = mg + F_P\), which is larger than the weight. The normal force is whatever the perpendicular equation requires, and here it must support both the weight and your push.
This page titled 5.2: Types of Forces was last modified on Thu, 12 Nov 2026 04:26:42 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.