Opening the book…
Heat moves from hot to cold by three distinct mechanisms: conduction, through direct contact; convection, carried by a moving fluid; and radiation, carried by electromagnetic waves. Most real situations involve all three, but each has its own rules.
Conduction. In conduction, energy passes through a material as its faster-jiggling molecules or atoms bump into slower neighbors, with no bulk motion of the material at all. A metal spoon left in hot soup grows warm at the handle by conduction. For a slab of area \(A\) and thickness \(L\) whose faces are held at temperatures \(T_h\) and \(T_c\) (Figure 37.5), experiment shows that the rate of heat flow, the energy per unit time, is
Key Equation: Heat conduction
\[P_{\rm cond} = \frac{Q}{t} = kA\,\frac{T_h - T_c}{L}. \tag{37.11}\]
The constant \(k\) is the thermal conductivity of the material (Table 37.4), in \(\,\mathrm{W/(m\cdot K)}\). It ranges over five orders of magnitude. Metals conduct heat best, because their free electrons (the same ones that carry electric current, Chapter 42) carry energy quickly through the solid. Gases conduct worst, because their molecules are far apart. Nearly every good insulator, from wool and down feathers to foam and fiberglass, works the same way: it traps air in tiny pockets where it cannot circulate, and lets air’s low conductivity do the rest.
| Material | \(k\) (\(\,\mathrm{W/(m\cdot K)}\)) | Material | \(k\) (\(\,\mathrm{W/(m\cdot K)}\)) |
|---|---|---|---|
| Silver | \(427\) | Water | \(0.60\) |
| Copper | \(397\) | Wood (pine) | \(0.12\) |
| Aluminum | \(238\) | Fiberglass insulation | \(0.040\) |
| Steel | \(50\) | Polystyrene foam | \(0.033\) |
| Glass | \(0.84\) | Air | \(0.026\) |
| Concrete | \(0.80\) |
When heat must cross several layers in a row, such as the wood, insulation, and drywall of a house wall, the same heat flow passes through each layer in turn. The temperature drops across the layers add up to the total, and the result is
\[P_{\rm cond} = \frac{A(T_h - T_c)}{\sum_i L_i/k_i}. \tag{37.12}\]
Each term \(L_i/k_i\) is the layer’s thermal resistance per unit area (sold in the building trade as an “R-value”), and resistances in series simply add, just as electrical resistances do in Chapter 21.
Example 37.10: A picnic cooler
A polystyrene-foam cooler has a total wall area of \(0.80\,\mathrm{m^2}\) and walls \(2.0\,\mathrm{cm}\) thick. It holds ice at \(0^{\circ}\mathrm{C}\) on a \(30^{\circ}\mathrm{C}\) day. (a) At what rate does heat leak in through the walls? (b) How long will \(5.0\,\mathrm{kg}\) of ice last?
Solution
(a) Heat flow. With \(k = 0.033\,\mathrm{W/(m\cdot K)}\) from Table 37.4,
\[P = kA\,\frac{T_h - T_c}{L} = (0.033)(0.80)\frac{30}{0.020} = \boxed{40\,\mathrm{W}}.\]
(b) Melting time. Melting the ice takes \(Q = mL_f = (5.0)(3.33\times10^5) = 1.67\times 10^{6}\,\mathrm{J}\), so
\[t = \frac{Q}{P} = \frac{1.67\times10^6\,\mathrm{J}}{40\,\mathrm{W}} = 4.2\times 10^{4}\,\mathrm{s} \approx \boxed{12\,\mathrm{h}}.\]
The ice lasts about half a day. In practice it lasts a little less, because heat also leaks in each time the lid is opened and the warm air inside is replaced.
Example 37.11: Insulating a wall
A \(10.0\,\mathrm{m^2}\) section of wall is made of \(2.0\,\mathrm{cm}\) of pine boards. The inside is at \(20^{\circ}\mathrm{C}\) and the outside at \(-5^{\circ}\mathrm{C}\). (a) Find the rate of heat loss. (b) Find the rate of heat loss after a \(9.0\,\mathrm{cm}\) layer of fiberglass insulation is added.
Solution
(a) Wood alone. \[P = kA\,\frac{\Delta T}{L} = (0.12)(10.0)\frac{25}{0.020} = \boxed{1500\,\mathrm{W}}.\]
(b) Wood plus fiberglass. The thermal resistances add:
\[\sum\frac{L_i}{k_i} = \frac{0.020}{0.12} + \frac{0.090}{0.040} = 0.17 + 2.25 = 2.42\,\mathrm{m^2\cdot K/W},\]
\[P = \frac{A\,\Delta T}{\sum L_i/k_i} = \frac{(10.0)(25)}{2.42} = \boxed{103\,\mathrm{W}}.\]
The insulation cuts the heat loss by a factor of about fifteen. Nearly all of the thermal resistance is in the fiberglass, the layer with the largest \(L/k\). (These figures ignore the thin layers of still air clinging to each surface, which add a little more resistance in real walls.)
Convection. In convection, heat is carried by the bulk motion of a fluid. Air warmed by a radiator expands (Chapter 36), becomes less dense than the cooler air around it, and rises; cooler air flows in to take its place, and a circulating current carries energy around the room. This is natural convection, driven by buoyancy (Chapter 14). Forced convection uses a fan or pump instead, as in a car’s radiator or a convection oven, and it carries heat away much faster, which is why a breeze feels cooler than still air at the same temperature. Convection on a planetary scale moves heat from the tropics toward the poles through winds and ocean currents, and it drives the daily sea breeze: the land heats up faster than the sea during the day, the air above it rises, and cool air flows in off the water.
Radiation. In radiation, energy is carried by electromagnetic waves (Chapter 27), so no medium is needed at all. The Sun warms the Earth across \(150\,\mathrm{million}\) kilometers of empty space by radiation. Every object emits thermal radiation, at a rate given by the Stefan–Boltzmann law:
Key Equation: Stefan–Boltzmann law
\[P_{\rm rad} = \sigma\varepsilon A T^4. \tag{37.13}\]
Here \(A\) is the surface area, \(T\) the Kelvin temperature of the surface, and \(\sigma = 5.670\times 10^{-8}\,\mathrm{W/(m^2\cdot K^4)}\) the Stefan–Boltzmann constant. The emissivity \(\varepsilon\), between \(0\) and \(1\), describes the surface: a perfect absorber, an ideal blackbody, has \(\varepsilon = 1\), and a shiny reflective surface has \(\varepsilon\) near \(0\). A good absorber is always an equally good emitter. The steep \(T^4\) means radiation dominates at high temperatures: doubling the Kelvin temperature multiplies the emitted power by sixteen. An object also absorbs radiation from its surroundings, at temperature \(T_{\rm env}\), so its net rate of radiative loss is
\[P_{\rm net} = \sigma\varepsilon A\left(T^4 - T_{\rm env}^4\right). \tag{37.14}\]
At room temperature the radiation is almost all infrared, invisible to us but plain to a thermal camera; at about \(800\,\mathrm{K}\) an object begins to glow a dull red. Explaining the colors of this glow was the problem that launched quantum mechanics (Chapter 39).
Example 37.12: Radiating like a light bulb
A person with a skin area of \(1.5\,\mathrm{m^2}\) and skin temperature \(34^{\circ}\mathrm{C}\) sits unclothed in a room whose walls are at \(22^{\circ}\mathrm{C}\). Skin, whatever its color, is nearly a blackbody in the infrared, \(\varepsilon = 0.97\). Find the net rate of heat loss by radiation.
Solution
In kelvins, \(T = 307\,\mathrm{K}\) and \(T_{\rm env} = 295\,\mathrm{K}\). Then
\[T^4 - T_{\rm env}^4 = (307)^4 - (295)^4 = 8.88\times10^{9} - 7.57\times10^{9} = 1.31\times 10^{9}\,\mathrm{K^4},\]
\[P_{\rm net} = (5.67\times10^{-8})(0.97)(1.5)(1.31\times10^9) \approx \boxed{110\,\mathrm{W}}.\]
That is about as much as the body’s entire resting metabolic output of roughly \(100\,\mathrm{W}\), which is why an unclothed person in a \(22^{\circ}\mathrm{C}\) room soon feels chilly even though the air is not cold. Clothing helps less by blocking radiation than by trapping a layer of warm air next to the skin. Note that we had to use Kelvin temperatures and subtract their fourth powers; subtracting first, \((307 - 295)^4\), would be badly wrong.
A good vacuum bottle defeats all three mechanisms at once: a vacuum gap between its walls stops conduction and convection (no matter to carry the heat), and a shiny reflective lining, with \(\varepsilon\) close to zero, turns back radiation. That is why such a bottle keeps coffee hot and lemonade cold for hours.
Checkpoint 37.5
On a chilly night, a tile floor feels much colder to your bare feet than a wool rug in the same room, even though both are at the same temperature. Which heat-transfer mechanism explains the difference, and in which direction is the heat flowing?
Answers to Checkpoints
Checkpoint 37.5. Conduction. Both surfaces are at the same temperature, below that of your skin, so in both cases heat flows from your feet into the floor. Tile has a much higher thermal conductivity than wool (which traps insulating air), so it draws heat out of your feet far faster. Your skin senses the rate of heat loss, not the floor’s temperature, so the tile feels colder.
This page titled 37.4: Heat Transfer Mechanisms was last modified on Thu, 12 Nov 2026 04:26:56 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.