12.E: Static Equilibrium and Elasticity (Problems)

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    12.E: Static Equilibrium and Elasticity (Problems)

    Difficulty key: ★ introductory, ★★ standard, ★★★ challenging.

    Section 12.1 — Equilibrium

    12.1 ★ [Conceptual.] State the two conditions for static equilibrium. Give an everyday example of an object that satisfies the force condition but not the torque condition, and describe what it does.

    12.2 ★ A \(3.0\,\mathrm{m}\) uniform plank of weight \(120\,\mathrm{N}\) rests on two supports, one at each end. A \(200\,\mathrm{N}\) child stands \(1.0\,\mathrm{m}\) from the left support. Find the upward force from each support.

    12.3 ★★ A uniform beam of mass \(15\,\mathrm{kg}\) and length \(4.0\,\mathrm{m}\) is hinged at a wall and held horizontal by a vertical cable at its far end.

    1. Find the tension in the cable.
    2. Find the vertical force the hinge exerts on the beam.

    12.4 ★★ [Real-world: construction.] A \(500\,\mathrm{N}\) uniform horizontal beam \(6.0\,\mathrm{m}\) long is pinned to a wall, with its far end held by a cable at \(40^\circ\) above the beam. A \(700\,\mathrm{N}\) load hangs from the far end. Find the cable tension.

    12.5 ★★ A uniform ladder leans against a frictionless wall at \(60^\circ\) above the ground. Find the minimum coefficient of static friction with the ground that keeps it from slipping.

    12.6 ★★★ A \(1200\,\mathrm{N}\) uniform beam \(5.0\,\mathrm{m}\) long is supported by a cable at its far end making \(30^\circ\) with the beam; the near end is pinned to a wall. A \(2000\,\mathrm{N}\) load sits \(3.5\,\mathrm{m}\) from the wall.

    1. Find the cable tension.
    2. Find the magnitude and direction of the force at the pin.

    12.7 ★★ [Conceptual.] When you carry a heavy bucket in one hand, you instinctively lean your body the other way. Explain this in terms of keeping your center of gravity over your feet and the conditions for equilibrium.

    12.8 ★★★ [Challenge.] A uniform beam of mass \(m\) and length \(L\) is held horizontal by a pivot a distance \(L/4\) from its left end. A support line attached to the beam’s right end runs upward and to the left at an angle \(\theta\) above the horizontal, and a force sensor reads the line’s tension.

    1. Sketch the beam and identify the lever arm of the beam’s weight about the pivot. Explain why a uniform beam has a nonzero weight torque here, even though it had none in the seesaw of Example 12.5.
    2. Find the tension in the support line in terms of \(m\), \(g\), and \(\theta\).
    3. Find the \(x\)- and \(y\)-components of the force the pivot exerts on the beam.

    Section 12.2 — Center of Gravity and Stability

    12.9 ★ A uniform meter stick is balanced at its center. A \(50\,\mathrm{g}\) mass is hung at the \(20\,\mathrm{cm}\) mark. Where must a \(100\,\mathrm{g}\) mass be hung to rebalance it?

    12.10 ★ [Conceptual.] Why does a car with a low center of gravity corner more safely than one with a high center of gravity? Relate your answer to the tendency to tip (rotate) versus skid.

    12.11 ★★ Two masses, \(2.0\,\mathrm{kg}\) and \(6.0\,\mathrm{kg}\), are attached to the ends of a light rod \(1.2\,\mathrm{m}\) long. Find the location of the center of gravity (measured from the lighter mass), and explain why a single support there would balance the rod.

    12.12 ★★ [Real-world: sports.] A high jumper arches her body into a curve as she crosses the bar. Explain how this lets her center of gravity pass below the bar even as her body passes over it, and why that is an advantage.

    12.13 ★★ A uniform beam of mass \(8.0\,\mathrm{kg}\) and length \(2.0\,\mathrm{m}\) has a \(4.0\,\mathrm{kg}\) point mass fixed to one end. Find the center of gravity of the combination, measured from the bare end.

    Section 12.3 — Elasticity

    12.14 ★ A wire \(1.5\,\mathrm{m}\) long and of cross-sectional area \(2.0\times 10^{-6}\,\mathrm{m^2}\) stretches by \(1.0\,\mathrm{mm}\) under a \(250\,\mathrm{N}\) load. Find Young’s modulus for the wire’s material.

    12.15 ★ [Conceptual.] Define stress and strain, and explain why the elastic modulus (their ratio) is a property of the material rather than of the particular object.

    12.16 ★★ A steel cable (\(Y = 2.0\times 10^{11}\,\mathrm{Pa}\)) of diameter \(1.0\,\mathrm{cm}\) and length \(20\,\mathrm{m}\) supports a \(2500\,\mathrm{kg}\) elevator car.

    1. Find the stress in the cable.
    2. Find how much the cable stretches.

    (Compare your answer to (a) with the roughly \(2.5\times 10^{8}\,\mathrm{Pa}\) at which structural steel begins to yield. This is why a real elevator hangs from several cables rather than one.)

    12.17 ★★ [Real-world: materials.] A nylon guitar string (\(Y = 3.0\times 10^{9}\,\mathrm{Pa}\)) and a steel one (\(Y = 2.0\times 10^{11}\,\mathrm{Pa}\)) have the same length and cross-section and carry the same tension. Which stretches more, and by what factor?

    12.18 ★★ The bulk modulus of water is \(2.2\times 10^{9}\,\mathrm{Pa}\). Find the fractional change in the volume of a sample of water taken to a depth where the pressure is \(4.0\times 10^{7}\,\mathrm{Pa}\) greater than at the surface.

    12.19 ★★★ A solid brass cube (\(S = 3.5\times 10^{10}\,\mathrm{Pa}\)) \(6.0\,\mathrm{cm}\) on a side has its top face pushed sideways by a force of \(2.0\times 10^{4}\,\mathrm{N}\) parallel to the face while the bottom is held fixed. Find the horizontal displacement of the top face.

    12.20 ★ [Conceptual.] Two rods are made of the same material and have the same length, but one has twice the cross-sectional area of the other. Under the same applied force, which rod stretches more, and by what factor? Identify which quantity (stress or strain) differs between them, and which is the same.

    Additional Problems

    12.21 ★★★ A uniform ladder of length \(5.0\,\mathrm{m}\) and weight \(150\,\mathrm{N}\) leans at \(60^\circ\) above the floor against a frictionless wall. The coefficient of static friction with the floor is \(0.40\). A \(700\,\mathrm{N}\) person climbs the ladder.

    1. Write the equilibrium conditions, identifying the floor normal force, the floor friction, and the wall normal force.
    2. How far up the ladder (measured along it) can the person climb before it begins to slip?
    3. What fraction of the ladder’s length is that?
    4. What minimum floor friction coefficient would let the person reach the very top?

    12.22 ★★★ [Real-world: engineering.] A \(1500\,\mathrm{kg}\) car has a wheelbase (front-to-rear axle distance) of \(2.6\,\mathrm{m}\). A scale under the front axle reads \(9000\,\mathrm{N}\) and one under the rear axle reads \(5700\,\mathrm{N}\).

    1. Verify that the readings are consistent with the car’s weight.
    2. How far behind the front axle is the center of gravity?
    3. What fraction of the weight does each axle carry?
    4. If \(300\,\mathrm{kg}\) of cargo is placed directly over the rear axle, where is the new center of gravity?

    12.23 ★★★ [Real-world: materials.] A \(200\,\mathrm{N}\) load hangs from a steel wire (\(Y = 2.0\times 10^{11}\,\mathrm{Pa}\), length \(3.0\,\mathrm{m}\)) joined end to end to a brass wire (\(Y = 9.0\times 10^{10}\,\mathrm{Pa}\), length \(2.0\,\mathrm{m}\)); both have cross-sectional area \(2.0\times 10^{-6}\,\mathrm{m^2}\).

    1. Find the stress in each wire, and explain why the two are equal.
    2. Find the elongation of each wire.
    3. Find the total elongation.
    4. Using equation (12.7), find the effective spring constant of the combination, and verify that it satisfies the series rule \(1/k = 1/k_1 + 1/k_2\).

    12.24 ★★ [Real-world: safety.] A uniform filing cabinet \(0.45\,\mathrm{m}\) wide and \(1.5\,\mathrm{m}\) tall stands on a level floor.

    1. Through what angle must the floor be tilted before the cabinet tips over?
    2. Pulling out a loaded top drawer shifts the cabinet’s center of gravity \(0.10\,\mathrm{m}\) horizontally toward the tipping edge and \(0.20\,\mathrm{m}\) upward. Find the new tipping angle.
    3. Your answers should explain a common safety warning about tall cabinets. State it, and say why anchoring the cabinet to the wall works.

    12.25 ★★★ [Real-world: vehicle dynamics.] A delivery truck has a track width (left wheels to right wheels) of \(t = 1.9\,\mathrm{m}\) and a center of gravity \(h = 1.1\,\mathrm{m}\) above the road. It rounds a flat curve, so friction supplies a horizontal acceleration \(a\) toward the center.

    1. Let \(F_{N,\rm in}\) and \(F_{N,\rm out}\) be the normal forces on the inner and outer wheels. Writing \(\sum\tau = 0\) about the center of gravity and \(\sum F = 0\), show that the truck is on the verge of rolling over (that is, \(F_{N,\rm in} = 0\)) when \(a = gt/2h\).
    2. Evaluate this rollover threshold for the truck, as a multiple of \(g\).
    3. The truck instead skids when \(a\) exceeds \(\mu_s g\). For \(\mu_s = 0.85\), does it roll or skid first?
    4. A load raises the center of gravity to \(1.5\,\mathrm{m}\). Repeat (b) and (c), and comment on what this means for how cargo should be stacked.

    12.26 ★★ [Real-world: design.] A steel tie rod must carry a static load of \(4.0\times 10^{4}\,\mathrm{N}\). The steel has a yield strength of \(2.5\times 10^{8}\,\mathrm{Pa}\), and the design code calls for a safety factor of 3 against yielding.

    1. Find the maximum allowable working stress.
    2. Find the minimum cross-sectional area, and the diameter of the smallest round rod that will do.
    3. The rod is \(2.5\,\mathrm{m}\) long. How much does it stretch at the working load? (\(Y = 2.0\times 10^{11}\,\mathrm{Pa}\).)

    This page titled 12.E: Static Equilibrium and Elasticity (Problems) was last modified on Thu, 12 Nov 2026 04:26:48 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.