14.4: Buoyancy and Archimedes’ Principle

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    14.4: Buoyancy and Archimedes’ Principle

    Why does a heavy object feel lighter underwater? Because pressure increases with depth, the fluid pushes up on the bottom of a submerged object harder than it pushes down on the top. The net upward force is the buoyant force.

    Two panels on buoyancy: fluid pressing on every face of a block, giving a net upward force.
    Figure 14.3. Buoyancy. (a) The fluid presses inward on every face. The side pushes are at equal depths and cancel; the push on the base is larger than the push on the top because the base is deeper. (b) The net result is a single upward buoyant force equal to the weight of the fluid that would fill the dashed volume. Here \(F_B\) and \(m\vec{g}\) happen to balance, so the block hovers; if they do not, it rises or sinks.
    Figure descriptionTwo panels on buoyancy. In panel (a) the fluid presses inward on every face of a submerged block, with arrows that start in the fluid and end on each face, longer at greater depth; the sideways pushes are at equal depths and cancel, while the upward push on the base exceeds the downward push on the top. Panel (b) shows the resultant, a net upward buoyant force equal to the weight of the displaced fluid.

    Its size is easy to pin down for a rectangular block of horizontal face area \(A\), held with its top face at depth \(h_1\) and its bottom face at depth \(h_2\). The fluid presses inward on all six faces. The pushes on opposite vertical sides are at equal depths, so they cancel; the vertical ones do not, because the bottom sits deeper:

    \[F_B = P_{\rm bottom}A - P_{\rm top}A = \big[(P_0 + \rho g h_2) - (P_0 + \rho g h_1)\big]A = \rho g (h_2 - h_1) A = \rho g V,\]

    where \(V = (h_2 - h_1)A\) is the block’s volume, precisely the volume of fluid it pushed out of the way. Remarkably, the shape turns out not to matter at all, a result known as Archimedes’ principle: a body immersed in a fluid is buoyed up by a force equal to the weight of the fluid it displaces.

    Key Equation: Archimedes’ principle

    \[F_B = \rho_{\rm fluid}\, V_{\rm disp}\, g, \tag{14.6}\]

    where \(V_{\rm disp}\) is the volume of fluid displaced (Figure 14.3). For a fully submerged object this is the object’s whole volume; for a floating one it is only the part below the surface.

    Whether an object sinks or floats follows from comparing equation (14.6) with the object’s weight. Submerge an object of volume \(V\) and average density \(\rho_{\rm obj}\): the buoyant force is \(\rho_{\rm fluid} V g\) and the weight is \(\rho_{\rm obj} V g\). The volume cancels, so only the densities matter:

    \[\rho_{\rm obj} > \rho_{\rm fluid} \;\Rightarrow\; \text{sinks}, \qquad \rho_{\rm obj} < \rho_{\rm fluid} \;\Rightarrow\; \text{rises}, \qquad \rho_{\rm obj} = \rho_{\rm fluid} \;\Rightarrow\; \text{hovers}.\]

    The third case, in which an object hangs motionless at any depth, is called neutral buoyancy; it is what a scuba diver trims for. It is the average density that counts, which is how a steel ship floats: hollow and full of air, the hull-plus-air combination is less dense than water, even though steel alone is eight times denser. Submarines exploit the same idea, flooding or emptying tanks to shift their average density above or below that of seawater.

    An object that rises does not leave the fluid entirely; it settles at the depth where it displaces exactly its own weight of fluid. Setting weight equal to buoyant force for a floating body, \(\rho_{\rm obj} V g = \rho_{\rm fluid} V_{\rm sub}\, g\), gives the submerged fraction directly:

    Key Equation: Floating: fraction submerged

    \[\frac{V_{\rm sub}}{V} = \frac{\rho_{\rm obj}}{\rho_{\rm fluid}}. \tag{14.7}\]

    Ice (\(917\,\mathrm{kg/m^3}\)) in seawater (\(1025\,\mathrm{kg/m^3}\)) floats with \(89\%\) of its volume submerged, hence the iceberg’s hidden nine-tenths. Only the ratio of densities appears, which is why the same log floats a little lower in fresh water than in salt water, and why a ship rides deeper leaving the ocean for a river.

    Example 14.5: Raising a sunken container

    A sealed, watertight shipping container resting on the ocean floor measures \(6.2\,\mathrm{m}\times2.7\,\mathrm{m}\times2.3\,\mathrm{m}\). Salvagers attach a spherical balloon to its top and inflate it; when the balloon’s radius reaches \(1.4\,\mathrm{m}\), the container just begins to rise. Find the mass of the container. The density of seawater is \(1025\,\mathrm{kg/m^3}\); ignore the mass of the balloon and the air inside it, and ignore any suction from the mud.

    Solution

    Step 1: The condition. The container “just begins to rise” when the total buoyant force equals the container’s weight. Both the container and the balloon displace seawater, so the displaced volume is the sum of the two.

    Step 2: The volumes. The container is a box, length times width times height; the balloon is a sphere, \(\tfrac{4}{3}\pi r^3\), with the radius cubed before multiplying:

    \[\begin{aligned}V_{\rm box} &= (6.2)(2.7)(2.3)\,\mathrm{m^3} = 38.5\,\mathrm{m^3}, \\ V_{\rm balloon} &= \tfrac{4}{3}\pi(1.4\,\mathrm{m})^3 = \tfrac{4}{3}\pi(2.744\,\mathrm{m^3}) = 11.5\,\mathrm{m^3},\end{aligned}\]

    giving \(V_{\rm disp} = 38.5 + 11.5 = 50.0\,\mathrm{m^3}\).

    Step 3: Solve for the mass. By Archimedes’ principle the buoyant force is the weight of the displaced water, \(\rho_{\rm sw}V_{\rm disp}\,g\). Set it equal to the container’s weight \(mg\) (the balloon and air masses are negligible), and divide both sides by \(g\):

    \[\rho_{\rm sw}\, V_{\rm disp}\, g = m g \;\Longrightarrow\; m = \rho_{\rm sw} V_{\rm disp} = (1025\,\mathrm{kg/m^3})(50.0\,\mathrm{m^3}) \approx \boxed{5.1\times 10^{4}\,\mathrm{kg}}.\]

    The value of \(g\) drops out entirely: the same salvage would work on any planet with seawater.

    The container has a mass of about \(51\) tonnes. Squeezing that into a box of \(38.5\,\mathrm{m^3}\) means dense cargo (machinery or metal stock), and it is worth seeing why the problem had to be set up that way. A container loaded to its usual legal maximum of about \(30\) tonnes has an average density of \(\rho = m/V = (30\,000\,\mathrm{kg})/(38.5\,\mathrm{m^3}) \approx 780\,\mathrm{kg/m^3}\), well below that of seawater. Such a container does not sink at all: containers lost overboard often drift half-submerged for weeks, a genuine hazard to small craft.

    Checkpoint 14.4

    An ice cube floats in a glass of water filled exactly to the brim. As it melts, does the glass overflow? Answer using equation (14.7) rather than intuition, and then say what changes if the ice cube has a small steel bolt frozen inside it. Now a harder version of the same idea: you are sitting in a small boat in a pond, holding a heavy rock. You throw the rock overboard and it sinks. Does the water level of the pond rise, fall, or stay the same? (Hint: compare the volume of water the rock displaces sitting on the bottom with the volume it displaced while riding in the boat.)

    Answer

    Answers to Checkpoints

    Checkpoint 14.4. No. By equation (14.7), a floating cube displaces its own weight of water. When it melts it becomes water of that same weight, which exactly fills the volume it was already displacing, so the level does not change. With a steel bolt inside, the floating cube displaces the weight of ice plus bolt. After melting, the bolt sinks and displaces only its own volume, which is much less than the volume of water equal to its weight (steel is about \(8\) times denser than water). The level falls, so there is still no overflow. The rock works the same way: in the boat it displaces its weight of water; on the bottom it displaces only its volume, which is smaller. So the pond’s water level falls.


    This page titled 14.4: Buoyancy and Archimedes’ Principle was last modified on Thu, 12 Nov 2026 04:26:44 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.