Opening the book…
When a particle moves with constant acceleration \(a\), the relationships among displacement \(\Delta x\), initial velocity \(v_0\), final velocity \(v\), acceleration \(a\), and elapsed time \(t\) simplify dramatically. Four equations result, each of which relates four of these five quantities.
Where the equations come from
Start from the definition of acceleration, \(a = \frac{\mathrm{d}v}{\mathrm{d}t}\), and take \(a\) to be constant. Integrating both sides from time \(0\) to time \(t\) gives
\[\int_{v_0}^{v} \,\mathrm{d}v' = \int_{0}^{t} a \,\mathrm{d}t' \qquad\Longrightarrow\qquad v - v_0 = a t,\]
which is the first equation. Now use the definition of velocity, \(v = \frac{\mathrm{d}x}{\mathrm{d}t}\), substitute the result we just obtained, and integrate again:
\[\int_{x_0}^{x} \,\mathrm{d}x' = \int_{0}^{t} \left(v_0 + a t'\right) \,\mathrm{d}t' \qquad\Longrightarrow\qquad \Delta x = v_0 t + \tfrac{1}{2} a t^{2},\]
the second equation. The remaining two are algebra: solve the first for \(t\) and substitute into the second to eliminate time, or average the first over the interval to eliminate the acceleration.
If integration is still new to you, Section 2.4 offers the same result without it. Under constant acceleration the \(v\)–\(t\) graph is a straight line from \(v_0\) to \(v\), and the region beneath it is a trapezoid of width \(t\) and parallel sides \(v_0\) and \(v\). Its area is \(\tfrac{1}{2}(v_0 + v)t\), and by equation (2.7) that area is the displacement, which is the fourth equation, obtained by inspection.
Key Equation: The four kinematic equations
\begin{align}v &= v_0 + a\,t \tag{2.8} \\ \Delta x &= v_0\,t + \tfrac{1}{2} a\,t^{2} \tag{2.9} \\ v^{2} &= v_0^{2} + 2 a\,\Delta x \tag{2.10} \\ \Delta x &= \tfrac{1}{2}(v + v_0)\,t \tag{2.11}\end{align}
Note: Two conditions on these four equations
First, the acceleration must be constant over the whole interval you apply them to. If the acceleration changes partway through, split the motion into segments on which it is constant and apply the equations to each segment in turn, carrying the final velocity of one segment in as the initial velocity of the next. If the acceleration varies continuously, these equations do not apply at all and you must integrate (see Example 2.5).
Second, \(t\) here means the elapsed time \(\Delta t\), with the clock started at zero at the beginning of the interval. Likewise \(v_0\) is the velocity at that starting instant and \(\Delta x\) is the displacement measured from the starting position, not the position itself.
Each equation is missing one of the five kinematic quantities, which makes it useful in different circumstances:
| Equation | Missing variable | Useful when… |
|---|---|---|
| (2.8) | \(\Delta x\) | you want velocity at a given time. |
| (2.9) | \(v\) | you want position at a given time. |
| (2.10) | \(t\) | time is neither known nor wanted. |
| (2.11) | \(a\) | acceleration is neither known nor wanted. |
Problem-solving strategy. For constant-acceleration problems:
- Draw a diagram and choose a positive direction.
- List the five quantities (\(\Delta x\), \(v_0\), \(v\), \(a\), \(t\)), marking which are known and which are unknown.
- Identify the equation that includes the three knowns and the one unknown you want.
- Solve algebraically before substituting numbers. Check units.
Example 2.3: Jet landing on an aircraft carrier
A jet lands on an aircraft carrier at a speed of \(65\,\mathrm{m/s}\).
- What is the jet’s acceleration (assumed constant) if it stops in \(2.0\,\mathrm{s}\) due to an arresting cable?
- How many \(g\)’s does the pilot experience, given that \(1g = 9.8\,\mathrm{m/s^2}\)?
- How far does the jet travel before coming to a stop?
Solution
Take the direction of the jet’s motion as \(+x\).
(a) Knowns: \(v_0 = 65\,\mathrm{m/s}\), \(v = 0\), \(t = 2.0\,\mathrm{s}\). Unknown: \(a\). Equation (2.8) contains exactly these quantities. Solve it for \(a\) before substituting: subtract \(v_0\) from both sides, then divide both sides by \(t\):
\[v = v_0 + a t \quad\Longrightarrow\quad v - v_0 = a t \quad\Longrightarrow\quad a = \frac{v - v_0}{t}.\]
Now substitute:
\[a = \frac{0 - 65\,\mathrm{m/s}}{2.0\,\mathrm{s}} = -32.5\,\mathrm{m/s^2}.\]
The velocity is positive and the acceleration is negative (opposite signs), so the jet is slowing down, as it had better be.
(b) To express an acceleration “in \(g\)’s,” divide it by \(g\). The units cancel, leaving a pure number that says how many times larger it is than free-fall acceleration:
\[\frac{\left|a\right|}{g} = \frac{32.5\,\cancel{\mathrm{m/s^2}}}{9.8\,\cancel{\mathrm{m/s^2}}} \approx 3.3.\]
The pilot experiences about \(3.3\,g\): significant but survivable, and in the range that carrier arresting gear is designed to deliver.
(c) We could use equation (2.10), but notice that equation (2.11) needs only the two velocities and the time, all of them given data, none of them values we computed and rounded:
\[\Delta x = \tfrac{1}{2}(v + v_0)t = \tfrac{1}{2}(0 + 65\,\mathrm{m/s})(2.0\,\mathrm{s}) = 65\,\mathrm{m}.\]
Here \(\tfrac{1}{2}(v + v_0)\) is the average of the starting and ending velocities, \(32.5\,\mathrm{m/s}\), and average velocity times time is displacement. The jet travels \(65\,\mathrm{m}\) along the deck before stopping. Whenever you have a choice, prefer the equation built from given data over one built from your own intermediate results.
Example 2.4: Chasing down a fumble
A linebacker recovers a fumble and is running at \(5.0\,\mathrm{m/s}\) directly away from a wide receiver. If the receiver is initially \(10\,\mathrm{m}\) behind the linebacker, starts from rest, and accelerates uniformly at \(2.5\,\mathrm{m/s^2}\), how long does it take the receiver to catch the linebacker?
Solution
Step 1: Write a position equation for each player. Let \(x = 0\) be the receiver’s starting position, with positive \(x\) in the direction of motion, and start the clock when the chase begins. Both players obey \(x = x_0 + v_0 t + \tfrac{1}{2} a t^2\) (equation (2.9) with \(\Delta x = x - x_0\)); they differ only in their starting values.
The linebacker starts \(10\,\mathrm{m}\) ahead, so \(x_0 = 10\), and runs at constant velocity, so \(a = 0\) and the \(t^2\) term vanishes:
\[x_L(t) = 10 + 5.0\,t.\]
The receiver starts at the origin (\(x_0 = 0\)) from rest (\(v_0 = 0\)), so only the acceleration term survives:
\[x_R(t) = \tfrac{1}{2}(2.5)t^2 = 1.25\,t^2.\]
(Here \(x\) is in meters and \(t\) in seconds.)
Step 2: Set the positions equal. “Catches” means both players are at the same place at the same time, \(x_R(t) = x_L(t)\):
\[1.25\,t^2 = 10 + 5.0\,t.\]
Step 3: Put the equation in standard quadratic form. The equation contains \(t^2\), so it is quadratic. To use the quadratic formula it must read \(at^2 + bt + c = 0\), with everything on one side. Subtract \(10\) and subtract \(5.0\,t\) from both sides:
\[1.25\,t^2 - 5.0\,t - 10 = 0.\]
Reading off the coefficients, signs included: \(a = 1.25\), \(b = -5.0\), \(c = -10\). (This \(a\) is just the coefficient in the quadratic, not the acceleration.)
Step 4: Apply the quadratic formula. The formula is
\[t = \frac{-b \pm \sqrt{b^2 - 4ac}}{2a}.\]
Work out each piece separately, since this is where sign errors happen:
\[\begin{aligned}-b &= -(-5.0) = +5.0, & b^2 &= (-5.0)^2 = 25, \\ -4ac &= -4(1.25)(-10) = +50, & 2a &= 2(1.25) = 2.5.\end{aligned}\]
The two negatives in \(-4ac\) multiply to a positive, so the quantity under the square root is \(25 + 50 = 75\):
\[t = \frac{5.0 \pm \sqrt{75}}{2.5} = \frac{5.0 \pm 8.66}{2.5}.\]
Step 5: Choose the physical root. A quadratic has two roots, and physics has to pick. The “minus” root gives \(t = (5.0 - 8.66)/2.5 = -1.46\,\mathrm{s}\), a time before the chase began, so it is discarded. The “plus” root gives
\[t = \frac{5.0 + 8.66}{2.5} = \frac{13.66}{2.5} \approx 5.46\,\mathrm{s},\]
so the receiver catches the linebacker in about \(\boxed{5.5\,\mathrm{s}}\).
Check. Put \(t = 5.46\,\mathrm{s}\) back into both position equations. Receiver: \(1.25(5.46)^2 = 37.3\,\mathrm{m}\). Linebacker: \(10 + 5.0(5.46) = 37.3\,\mathrm{m}\). They agree, so the players are indeed side by side.
Checkpoint 2.6
In Example 2.4, how fast is the receiver moving at the instant of catching the linebacker? Is the receiver faster or slower than the linebacker at that moment? Does your answer seem physically reasonable for a human sprinter? (For reference, the fastest speed ever recorded for a human runner is about \(12.4\,\mathrm{m/s}\).)
Example 2.5: When the four equations do not apply
A cart is pushed along the \(x\)-axis so that its acceleration increases steadily with time: \(a(t) = 6t\), with \(a\) in \(\,\mathrm{m/s^2}\) and \(t\) in seconds. It starts from rest at the origin. Find its velocity and position at \(t = 2.0\,\mathrm{s}\).
Solution
The acceleration is not constant, so equations (2.8)–(2.11) are simply unavailable. We must go back to the definitions and integrate, as in the derivation of Section 2.5, but this time with the actual \(a(t)\) in place of a constant.
Step 1: Velocity. Since \(a = \frac{\mathrm{d}v}{\mathrm{d}t}\), the change in velocity from time \(0\) to time \(t\) is the integral of \(a\) over that interval:
\[v(t) - v(0) = \int_0^t a(t') \,\mathrm{d}t' = \int_0^t 6t' \,\mathrm{d}t'.\]
(The prime on \(t'\) just distinguishes the variable being integrated over from the upper limit \(t\).) The cart starts from rest, so \(v(0) = 0\). To integrate, use the power rule: raise the exponent by one and divide by the new exponent, \(\int t^n\,\mathrm{d}t = t^{n+1}/(n+1)\). Here \(n = 1\):
\[\int_0^t 6t' \,\mathrm{d}t' = 6\left[\frac{t'^2}{2}\right]_0^t = 6\left(\frac{t^2}{2} - \frac{0^2}{2}\right) = 3t^2.\]
So \(v(t) = 3t^2\), and at \(t = 2.0\,\mathrm{s}\), \(v = 3(2.0)^2 = 3(4.0) = 12.0\,\mathrm{m/s}\).
Step 2: Position. Since \(v = \frac{\mathrm{d}x}{\mathrm{d}t}\), integrate once more. The cart starts at the origin, so \(x(0) = 0\). Now \(n = 2\):
\[x(t) = \int_0^t 3t'^2 \,\mathrm{d}t' = 3\left[\frac{t'^3}{3}\right]_0^t = 3\left(\frac{t^3}{3} - 0\right) = t^3,\]
so \(x = (2.0)^3 = 8.00\,\mathrm{m}\).
Check. Differentiate back down: \(\frac{\mathrm{d}}{\mathrm{d}t}(t^3) = 3t^2\), which is \(v\), and \(\frac{\mathrm{d}}{\mathrm{d}t}(3t^2) = 6t\), which is \(a\). Each integration undid one differentiation, as it should.
It is worth seeing how badly the constant-acceleration equations would have failed here. At \(t = 2.0\,\mathrm{s}\) the acceleration happens to be \(a = 6(2.0) = 12\,\mathrm{m/s^2}\); feeding that into equation (2.9) as though it had held all along gives \(\Delta x = \tfrac{1}{2}(12)(2.0)^2 = 24\,\mathrm{m}\), three times the correct answer. The equations are not approximations that degrade gracefully when the acceleration varies: they are derived from an assumption, and when the assumption fails, so do they.
Answers to Checkpoints
Checkpoint 2.6. Starting from rest with \(a = 2.5\,\mathrm{m/s^2}\), after \(t = 5.46\,\mathrm{s}\) the receiver moves at \(v = at = (2.5)(5.46) \approx 13.7\,\mathrm{m/s}\), well over twice the linebacker’s \(5.0\,\mathrm{m/s}\), as it must be for the receiver to have closed a \(10\,\mathrm{m}\) gap. It is not physically reasonable: \(13.7\,\mathrm{m/s}\) exceeds the fastest human speed ever recorded, and no one can keep accelerating uniformly for five and a half seconds. The constant-acceleration model is an idealization that breaks down here; a real receiver would reach top speed sooner and take longer to catch up.
This page titled 2.5: Kinematics in One Dimension was last modified on Thu, 12 Nov 2026 04:26:47 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.