Opening the book…
Summary
- The electric force is conservative, so it has a potential energy. The potential difference between two points is the change in potential energy per unit charge, \(\Delta V = \Delta U/q_0 = -\int\vec{E}\cdot d\vec{s}\), measured in volts (\(1\,\mathrm{V} = 1\,\mathrm{J/C}\); \(1\,\mathrm{V/m} = 1\,\mathrm{N/C}\)). In a uniform field \(\Delta V = -Ed\). The field points toward lower potential.
- A charge \(q\) at potential \(V\) has electric potential energy \(U = qV\). With only electric forces acting, \(\Delta K = -q\,\Delta V\): positive charges accelerate toward lower potential, negative charges toward higher. One electron volt is \(1.602\times 10^{-19}\,\mathrm{J}\).
- Equipotential surfaces are perpendicular to the field and crowd together where it is strong. A conductor in equilibrium is an equipotential; its surface charge density, and the field just outside, are greatest where it curves most sharply (\(\sigma \propto 1/R\)). An empty cavity in a conductor carries no charge and has no field.
- A point charge has \(V = k_eq/r\) (zero at infinity), and a dipole far away has \(V = k_ep\cos\theta/r^2\). Potentials of several charges add as scalars, \(V = \sum k_eq_i/r_i\). Two charges have potential energy \(U = k_eq_1q_2/r\); a system’s energy is the sum over pairs.
- For continuous distributions \(V = k_e\int dq/r\): a ring gives \(k_eQ/\sqrt{x^2 + a^2}\) on its axis and a disk \((\sigma/2\epsilon_0)(\sqrt{x^2 + R^2} - x)\). The potential can also be found by integrating a known field, as for the sphere and the infinite line.
- The field follows from the potential: \(E_x = -\partial V/\partial x\) and so on, or \(\vec{E} = -\nabla V\).
Key Equations
Potential difference
\[\Delta V = \frac{\Delta U}{q_0} = -\int_A^B \vec{E}\cdot d\vec{s}, \qquad \Delta V = -Ed \ \ \text{(uniform field)}\]
Potential energy of a charge, and energy conservation
\[U = qV, \qquad \Delta K = -q\,\Delta V, \qquad 1\,\mathrm{eV} = 1.602\times 10^{-19}\,\mathrm{J}\]
Point charge, and system of point charges
\[V = \frac{k_e q}{r}, \qquad V = \sum_i \frac{k_e q_i}{r_i}\]
Electric dipole (far away)
\[V = \frac{k_e p\cos\theta}{r^2}\]
Potential energy of two point charges
\[U = \frac{k_e q_1 q_2}{r}\]
Continuous distribution
\[V = \int dV = k_e\int\frac{dq}{r}\]
Ring and disk (on the axis)
\[V_{\text{ring}} = \frac{k_eQ}{\sqrt{x^2 + a^2}}, \qquad V_{\text{disk}} = \frac{\sigma}{2\epsilon_0}\left(\sqrt{x^2 + R^2} - x\right)\]
Field from potential
\[E_x = -\frac{\partial V}{\partial x}, \quad E_y = -\frac{\partial V}{\partial y}, \quad E_z = -\frac{\partial V}{\partial z}; \qquad \vec{E} = -\nabla V\]
This page titled 18.S: Electric Potential (Summary) was last modified on Thu, 12 Nov 2026 04:25:49 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.