Opening the book…
A charged rod, plate, or sphere contains so many elementary charges that summing Coulomb’s law over each one is out of the question. We have seen that at this scale the graininess of charge is invisible, so instead we treat the charge as spread smoothly through the object, a continuous charge distribution. The sum of equation (15.4) then becomes an integral, just as the sum over particles that gave the moment of inertia became an integral in Chapter 10.
Charge density. To describe how charge is spread through an object, we use a charge density, the amount of charge per unit length, area, or volume, depending on the shape:
- For charge along a thin rod or wire, the linear charge density \(\lambda\) is the charge per unit length, in \(\,\mathrm{C/m}\). A small piece of length \(d\ell\) carries charge \(dq = \lambda\,d\ell\).
- For charge spread over a thin sheet or the surface of a conductor, the surface charge density \(\sigma\) is the charge per unit area, in \(\,\mathrm{C/m^2}\). A small patch of area \(dA\) carries \(dq = \sigma\,dA\).
- For charge spread through a volume, the volume charge density \(\rho\) is the charge per unit volume, in \(\,\mathrm{C/m^3}\). A small element of volume \(dV\) carries \(dq = \rho\,dV\).
If the charge \(Q\) is spread uniformly, the densities are simply
Key Equation: Uniform charge densities
\[\lambda = \frac{Q}{L}, \qquad \sigma = \frac{Q}{A}, \qquad \rho = \frac{Q}{V}. \tag{15.5}\]
(The symbol \(\rho\) does double duty as mass density, as in Chapter 14. Context always makes clear which one is meant.)
The force from a continuous distribution. Divide the distribution into tiny elements, each carrying charge \(dq\) and small enough to be treated as a point charge. By Coulomb’s law, the element exerts a force \(d\vec{F}\) on a point charge \(q\) a distance \(r\) away. By superposition, the total force is the sum, in the limit of infinitely many tiny elements, of all these contributions:
Key Equation: Force from a continuous charge distribution
\[\vec{F} = \int d\vec{F} = k_e\,q\int \frac{dq}{r^2}\,\hat{r}. \tag{15.6}\]
Here \(\hat{r}\) is the unit vector pointing from the element \(dq\) toward the point charge \(q\), as in equation (15.3), and both \(r\) and \(\hat{r}\) generally change from one element to the next. Since \(d\vec{F}\) is a vector, equation (15.6) is really two or three integrals, one for each component. In practice the work always follows the same steps:
- Sketch the distribution and the point charge. Pick a typical element \(dq\), somewhere in the middle of the distribution rather than at a special point.
- Write \(dq\) in terms of the charge density and a coordinate: \(dq = \lambda\,dx\), for example.
- Write the distance \(r\) from \(dq\) to \(q\), and the direction of \(d\vec{F}\), in terms of that coordinate.
- Use symmetry to decide which components cancel when all the elements are added, and integrate only the ones that survive.
- Check the answer in a limit you already understand, usually far away, where the distribution should look like a point charge.
The next two examples carry out these steps for the two simplest cases. In the first, every element pushes in the same direction, so only magnitudes need adding. In the second, symmetry does most of the work.
Example 15.7: A point charge on the axis of a charged rod
A thin rod of length \(L\) carries a total charge \(Q\) spread uniformly along it. A point charge \(q\) sits on the rod’s axis, a distance \(d\) beyond one end, as shown. (a) Find the electric force on \(q\). (b) Evaluate it for \(L = 0.200\,\mathrm{m}\), \(d = 0.100\,\mathrm{m}\), \(Q = +3.00\,\mathrm{\mu C}\), and \(q = +1.00\,\mathrm{\mu C}\).
Solution
(a) Put \(q\) at the origin and let the rod lie along the \(x\)-axis from \(x = d\) to \(x = d + L\). The linear charge density is \(\lambda = Q/L\), so an element of length \(dx\) at position \(x\) carries charge \(dq = \lambda\,dx\) and is a distance \(x\) from \(q\). Taking \(Q\) and \(q\) to have the same sign, every element pushes \(q\) in the \(-x\) direction, away from the rod, so the contributions all point the same way and we can simply add their magnitudes:
\[dF = k_e\frac{q\,dq}{x^2} = k_e\,q\lambda\,\frac{dx}{x^2}.\]
Integrating over the length of the rod,
\[F = k_e\,q\lambda\int_{d}^{d+L}\frac{dx}{x^2} = k_e\,q\lambda\left[-\frac{1}{x}\right]_{d}^{d+L} = k_e\,q\lambda\left(\frac{1}{d} - \frac{1}{d+L}\right) = k_e\,q\lambda\,\frac{L}{d(d+L)}.\]
With \(\lambda L = Q\), this is
\[F = \frac{k_e\,qQ}{d(d+L)}, \tag{15.7}\]
directed along the rod’s axis, away from the rod for like charges and toward it for unlike charges.
Check. Far from the rod, \(d \gg L\), so \(d + L \approx d\) and \(F \to k_e qQ/d^2\): from far away the rod looks like a point charge, as it should.
(b) Substituting the numbers,
\[F = \frac{(8.99\times10^{9})(1.00\times10^{-6})(3.00\times10^{-6})}{(0.100)(0.300)} = \boxed{0.899\,\mathrm{N}},\]
directed away from the rod. It is tempting to treat the rod as a point charge at its center, \(0.200\,\mathrm{m}\) from \(q\). That would give \(0.674\,\mathrm{N}\), which is \(25\%\) too small. The near half of the rod gains more force by being close than the far half loses by being far away, because of the steep \(1/x^2\) dependence.
Example 15.8: A point charge on the axis of a charged ring
A thin ring of radius \(a\) carries a total charge \(Q\) spread uniformly around it. A point charge \(q\) sits on the ring’s axis, a distance \(x\) from its center, as shown. (a) Find the electric force on \(q\). (b) Evaluate it for \(a = 0.100\,\mathrm{m}\), \(x = 0.100\,\mathrm{m}\), \(Q = +2.00\,\mathrm{\mu C}\), and \(q = +1.00\,\mathrm{\mu C}\).
Solution
(a) Every element \(dq\) of the ring is the same distance from \(q\):
\[r = \sqrt{x^2 + a^2}.\]
Each element exerts a force of magnitude \(dF = k_e q\,dq/r^2\), directed along the line from the element to \(q\). That line makes an angle \(\theta\) with the axis, so \(d\vec{F}\) has a component \(dF\cos\theta\) along the axis and a component \(dF\sin\theta\) perpendicular to it.
Now use symmetry. For every element \(dq\) there is an identical element on the opposite side of the ring, whose perpendicular component points the opposite way (its force is dashed in the sketch). When all the elements are added, the perpendicular components cancel in pairs, and only the axial components survive. With \(\cos\theta = x/r\),
\[F = \int dF\cos\theta = \int k_e\frac{q\,dq}{r^2}\cdot\frac{x}{r} = \frac{k_e\,q\,x}{(x^2+a^2)^{3/2}}\int dq.\]
Because \(x\) and \(r\) are the same for every element, they come outside the integral, and \(\int dq\) is simply the total charge \(Q\) on the ring. Therefore
\[F = \frac{k_e\,qQ\,x}{(x^2+a^2)^{3/2}}, \tag{15.8}\]
directed along the axis, away from the ring for like charges.
Checks. At the center of the ring, \(x = 0\) and \(F = 0\): the pushes from all sides cancel. Far away, \(x \gg a\), the \(a^2\) is negligible and \(F \to k_e qQ/x^2\), the force of a point charge.
(b) With \(x = a = 0.100\,\mathrm{m}\), \(x^2 + a^2 = 0.0200\,\mathrm{m^2}\), and
\[F = \frac{(8.99\times10^{9})(1.00\times10^{-6})(2.00\times10^{-6})(0.100)}{(0.0200)^{3/2}} = \boxed{0.636\,\mathrm{N}}.\]
Equation (15.8) has an interesting form. The force is zero at the center of the ring and falls toward zero far away, so somewhere in between it must reach a maximum. Setting \(dF/dx = 0\) shows that the maximum is at \(x = a/\sqrt{2}\). And because the force on a charge of opposite sign points back toward the center from either side, such a charge released near the center of the ring oscillates back and forth through it. Problem 15.25 shows that for small displacements this is simple harmonic motion (Chapter 28).
Note: Looking ahead: the charge \(q\) always factors out
Look back at equations (15.7) and (15.8). In both, the force on \(q\) is \(q\) multiplied by something that depends only on the source (its charge, shape, and size) and on where \(q\) is placed. The same is true of every force in this chapter, because Coulomb’s law is proportional to \(q\). That suggests dividing \(q\) out and describing what the source does to the space around it, before any test charge is placed there. That quantity, the force per unit charge, is the electric field, and it is the subject of Chapter 16. The rod and the ring will reappear there, along with a disk, an infinite plane, and a sphere.
Checkpoint 15.5
(a) In Example 15.8, the ring’s charge is moved so that all of it sits on the upper half of the ring, still uniformly spread. Is the force on \(q\) still directed along the axis? Is its axial component larger, smaller, or the same as before? (Hint: does moving an element around the ring change its distance from \(q\)?) (b) Using equation (15.8), at what distance \(x\), in terms of \(a\), is the force on \(q\) greatest? Check the claim in the text that it is \(a/\sqrt{2}\).
Answers to Checkpoints
Checkpoint 15.5. (a) No, the force is no longer purely along the axis. Each element still pushes \(q\) with a component along the axis, but the components perpendicular to the axis no longer cancel in pairs; the net force gains a component pointing away from the charged upper half, that is, downward. The axial component is unchanged: moving an element around the ring changes neither its distance \(r\) from \(q\) nor the angle its push makes with the axis, so each element contributes the same axial push as before. (b) Set \(dF/dx = 0\). By the quotient rule the numerator of the derivative is \((x^2+a^2)^{3/2} - x\cdot\tfrac{3}{2}(x^2+a^2)^{1/2}(2x)\). Setting it to zero and dividing by \((x^2+a^2)^{1/2}\) gives \(x^2 + a^2 = 3x^2\), so \(x^2 = a^2/2\) and \(x = a/\sqrt{2}\), confirming the text.
This page titled 15.4: Electric Forces on Continuous Charge Distributions was last modified on Thu, 12 Nov 2026 04:27:17 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.