29.5: Phasors

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    29.5: Phasors

    What happens when two waves arrive at the same place at the same time? The answer is the superposition principle: the net displacement is simply the sum of the displacements each wave would produce alone. Where the two reinforce, we get constructive interference; where they oppose, destructive interference. To make this quantitative for sinusoidal waves, we introduce a wonderfully convenient bookkeeping device: the phasor.

    Phasor diagram adding two waves of amplitude A that differ in phase.
    Figure 29.2. Adding two waves with a phasor diagram. Each wave is an arrow of length \(A\); the second is turned through the phase difference \(\phi\) and placed head to tail with the first. The resultant (red) has length \(2A\cos(\phi/2)\): maximal when \(\phi = 0\) (arrows aligned) and zero when \(\phi = \pi\) (arrows opposed).
    Figure descriptionA phasor addition diagram. A first blue arrow of length A points to the right from the origin. A second blue arrow, also of length A, starts at the tip of the first and is rotated up by the phase difference phi. A red arrow from the origin to the tip of the second closes the triangle; it is the resultant, of length 2 A cosine of phi over 2. A small arc at the joint marks the angle phi.

    A phasor represents a sinusoidal wave as an arrow of length equal to the wave’s amplitude, oriented at an angle equal to the wave’s phase. Adding two waves of the same frequency then becomes adding two arrows, head to tail, exactly like adding vectors (Figure 29.2). The length of the resultant arrow is the amplitude of the combined wave, and its angle is the combined phase. If phasors are new to you, or you met them in Chapter 26 and would like a refresher, Section C.8 of Appendix C builds them up step by step: how a rotating phasor traces out a sine curve, what a phase difference looks like, and why adding phasors adds sinusoids.

    Consider two waves of equal amplitude \(A\) and frequency, traveling together but offset by a phase difference \(\phi\):

    \[y_1 = A\sin(kx - \omega t), \qquad y_2 = A\sin(kx - \omega t + \phi).\]

    By the superposition principle their sum is \(y = y_1 + y_2 = A\big[\sin(kx - \omega t) + \sin(kx - \omega t + \phi)\big]\). Applying the trigonometric identity \(\sin a + \sin b = 2\cos\!\big(\tfrac{a-b}{2}\big)\sin\!\big(\tfrac{a+b}{2}\big)\) (which is the algebraic statement of the phasor addition in Figure 29.2) gives

    Key Equation: Superposition of two sinusoidal waves

    \[y = \underbrace{2A\cos\!\left(\frac{\phi}{2}\right)}_{\text{amplitude}}\ \sin\!\left(kx - \omega t + \frac{\phi}{2}\right). \tag{29.10}\]

    The result is still a sinusoidal wave of the same frequency and wavelength, but with a new amplitude \(2A\cos(\phi/2)\) set entirely by the phase difference:

    • If \(\phi = 0\) (or \(2\pi, 4\pi, \dots\)) the waves are in phase; \(\cos(\phi/2) = 1\), the amplitude is \(2A\), and the interference is fully constructive.
    • If \(\phi = \pi\) (or \(3\pi, 5\pi, \dots\)) the waves are out of phase; \(\cos(\phi/2) = 0\), the amplitude is zero, and the interference is fully destructive: the two waves cancel completely.
    Checkpoint 29.3

    Two identical waves are sent down the same string, the second lagging the first by a phase difference \(\phi\). For what value of \(\phi\) (between \(0\) and \(2\pi\)) is the combined wave’s amplitude equal to \(A\): the same as one wave alone? (Set \(2A\cos(\phi/2) = A\) and solve.)

    Answer

    Answers to Checkpoints

    Checkpoint 29.3. Setting \(2A\cos(\phi/2) = A\) gives \(\cos(\phi/2) = \tfrac{1}{2}\), so \(\phi/2 = \pi/3\) and \(\phi = 2\pi/3\) (\(120^\circ\)). The amplitude is really \(2A\,|\cos(\phi/2)|\), since a negative value just flips the combined wave’s sign, so \(\cos(\phi/2) = -\tfrac{1}{2}\) works too, giving \(\phi = 4\pi/3\) (\(240^\circ\)). In phasor terms, two equal phasors \(120^\circ\) apart form two sides of an equilateral triangle, so their sum has the same length as either one.


    This page titled 29.5: Phasors was last modified on Thu, 12 Nov 2026 04:27:05 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.