Opening the book…
Summary
- A circuit diagram shows how elements are connected, using standard symbols; each wire is at a single potential. A source’s emf \(\mathcal{E}\) is the work it does per unit charge, in volts. Ammeters go in series; voltmeters go across.
- Kirchhoff’s rules: the junction rule, \(\sum I_{\text{in}} = \sum I_{\text{out}}\) (charge conservation), and the loop rule, \(\sum \Delta V = 0\) around any closed loop (energy conservation). Crossing a resistor with the current, \(\Delta V = -IR\); crossing a battery from \(-\) to \(+\), \(\Delta V = +\mathcal{E}\).
- A source delivers power \(\mathcal{E}I\) when current leaves its positive terminal, and absorbs it when being charged. The power supplied equals the power absorbed.
- Resistors in series carry the same current: \(R_{\text{eq}} = R_1 + R_2 + \cdots\). Resistors in parallel have the same voltage: \(1/R_{\text{eq}} = 1/R_1 + 1/R_2 + \cdots\). A series pair divides the voltage in proportion to the resistances.
- A real battery is an emf with an internal resistance \(r\): its terminal voltage is \(\mathcal{E} - Ir\), and it drives \(I = \mathcal{E}/(R + r)\) through a load. The load receives the most power when \(R = r\).
- In an RC circuit, charge and current change exponentially with time constant \(\tau = RC\). Charging: \(q = C\mathcal{E}(1 - e^{-t/RC})\), \(i = (\mathcal{E}/R)e^{-t/RC}\); half the battery’s work is stored and half becomes heat. Discharging: \(q = Q_0e^{-t/RC}\), with half-life \(0.693\,RC\).
Key Equations
Emf
\[\mathcal{E} = \frac{W}{q}\]
Kirchhoff’s rules
\[\sum I_{\text{in}} = \sum I_{\text{out}}, \qquad \sum_{\text{loop}} \Delta V = 0\]
Power from a source of emf
\[P = \mathcal{E}I\]
Resistors in series and in parallel
\[R_{\text{eq}} = R_1 + R_2 + \cdots, \qquad \frac{1}{R_{\text{eq}}} = \frac{1}{R_1} + \frac{1}{R_2} + \cdots\]
Real battery
\[V_{\text{terminal}} = \mathcal{E} - Ir, \qquad I = \frac{\mathcal{E}}{R + r}\]
Charging a capacitor
\[q = C\mathcal{E}\left(1 - e^{-t/RC}\right), \qquad i = \frac{\mathcal{E}}{R}\,e^{-t/RC}\]
Discharging a capacitor
\[q = Q_0\,e^{-t/RC}, \qquad i = \frac{V_0}{R}\,e^{-t/RC}\]
Time constant and half-life
\[\tau = RC, \qquad t_{1/2} = RC\ln 2\]
This page titled 21.S: DC Circuits (Summary) was last modified on Thu, 12 Nov 2026 04:25:44 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.