Opening the book…
Chapters 15 and 16 handled continuous distributions with a single idea: chop the charge into small elements \(dq\), treat each element as a point charge, and add up the contributions with an integral. The potential works exactly the same way. By equation (18.6), an element \(dq\) a distance \(r\) from the point \(P\) contributes a potential
\[dV = k_e\frac{dq}{r},\]
taking \(V = 0\) at infinity. Potentials add, so the total is the integral of all the contributions:
Key Equation: Potential of a continuous charge distribution
\[V = \int dV = k_e\int \frac{dq}{r}. \tag{18.10}\]
Here \(r\) is the distance from \(dq\) to \(P\). Set this beside the integral for the field, equation (16.8):
\[d\vec{E} = k_e\frac{dq}{r^2}\,\hat{r} \;\Longrightarrow\; \vec{E} = \int d\vec{E}, \qquad\qquad dV = k_e\frac{dq}{r} \;\Longrightarrow\; V = \int dV.\]
The recipe is the same, with two simplifications: the distance appears to the first power rather than the second, and there is no unit vector. Because \(dV\) is a scalar, there are no components to resolve and no symmetry argument is needed to cancel anything. The five steps of Section 15.4 carry over with their hardest step removed:
- Sketch the distribution and the point \(P\), and pick a typical element \(dq\).
- Write \(dq\) in terms of the charge density and a coordinate: \(dq = \lambda\,dx\), \(\sigma\,dA\), or \(\rho\,dV\).
- Write the distance \(r\) from \(dq\) to \(P\) in terms of that coordinate.
- Integrate \(dV = k_e\,dq/r\) over the whole distribution.
- Check a limit, usually far away, where the result must become \(k_eQ/r\).
A charged ring. A uniform ring of radius \(a\) carries charge \(Q\). We want the potential at a point on its axis, a distance \(x\) from the center (see the drawing in Example 15.8). Every element \(dq\) of the ring is the same distance \(r = \sqrt{x^2 + a^2}\) from that point, so \(r\) comes straight out of the integral, and \(\int dq = Q\):
\[V_{\text{ring}} = \int k_e\frac{dq}{r} = \frac{k_e}{\sqrt{x^2 + a^2}}\int dq = \frac{k_eQ}{\sqrt{x^2 + a^2}}. \tag{18.11}\]
Far away, \(x \gg a\), this becomes \(k_eQ/x\), as it must. Compare the effort that the field, equation (16.11), took: there we needed the axial component \(dE\cos\theta\) of each element’s field and a symmetry argument to discard the rest.
A charged rod. A thin rod of length \(L\) carries charge \(Q\) uniformly, with \(\lambda = Q/L\). Find the potential at a point \(P\) a distance \(y\) from the rod, on its perpendicular bisector. This is the same geometry as Figure 16.6. Put the rod on the \(x\)-axis from \(-L/2\) to \(L/2\). The element at \(x\) carries \(dq = \lambda\,dx\) and is a distance \(r = \sqrt{x^2 + y^2}\) from \(P\), so
\[V = \int dV = k_e\lambda\int_{-L/2}^{L/2}\frac{dx}{\sqrt{x^2 + y^2}} = k_e\lambda\left[\ln\!\left(x + \sqrt{x^2 + y^2}\right)\right]_{-L/2}^{L/2},\]
which simplifies to
\[V_{\text{rod}} = 2k_e\lambda\,\ln\!\left(\frac{L/2 + \sqrt{L^2/4 + y^2}}{y}\right). \tag{18.12}\]
Far away, \(y \gg L\), the fraction is close to \(1 + L/2y\), and since \(\ln(1 + u) \approx u\) for small \(u\), \(V \approx 2k_e\lambda(L/2y) = k_eQ/y\), the potential of a point charge. Compare the field of the same rod in Section 16.3: there we needed both components of \(d\vec{E}\), and a symmetry argument to cancel the components along the rod, before integrating. Here a single integral did everything.
Equation (18.12) also shows what goes wrong for an infinite line. For a long rod, \(L \gg y\), the fraction is about \(L/y\), so \(V \approx 2k_e\lambda\ln(L/y)\), which grows without limit as \(L \to \infty\). An infinite line has no finite potential relative to infinity. We return to this below.
A charged disk. Build a uniform disk of radius \(R\) and surface density \(\sigma\) from rings of radius \(r'\), width \(dr'\), and charge \(dq = \sigma\,dA = 2\pi\sigma r'\,dr'\), as in Section 16.3. By equation (18.11), each ring contributes \(dV = k_e\,dq/\sqrt{x^2 + r'^2}\) at a point on the axis, so
\[V = \int dV = \int_0^R \frac{2\pi k_e\sigma r'\,dr'}{\sqrt{x^2 + r'^2}} = 2\pi k_e\sigma\left[\sqrt{x^2 + r'^2}\right]_0^R,\]
which, using \(2\pi k_e = 1/2\epsilon_0\), is
\[V_{\text{disk}} = \frac{\sigma}{2\epsilon_0}\left(\sqrt{x^2 + R^2} - x\right). \tag{18.13}\]
Using the field instead. Adding up \(dV\) is not the only route. When the field is already known, from Gauss’s law say, it is often easier to find the potential by integrating the field with equation (18.1). For a uniformly charged solid sphere of radius \(R\) and charge \(Q\), the field outside is \(k_eQ/r^2\), exactly as for a point charge, so outside the potential is also that of a point charge, \(V = k_eQ/r\). At the surface it is \(k_eQ/R\). Inside, the field is \(k_eQr/R^3\) (equation (16.15)), and integrating inward from the surface,
\[V(r) = \frac{k_eQ}{R} - \int_R^r \frac{k_eQr'}{R^3}\,dr' = \frac{k_eQ}{R} + \frac{k_eQ}{2R^3}\left(R^2 - r^2\right),\]
which simplifies to
\[V = \frac{k_eQ}{2R}\left(3 - \frac{r^2}{R^2}\right) \quad (r \le R), \qquad V = \frac{k_eQ}{r} \quad (r \ge R). \tag{18.14}\]
The potential is greatest at the center, \(\tfrac32 k_eQ/R\). For a charged conducting sphere, or a thin shell, the field inside is zero, so the potential inside does not change from its surface value: \(V = k_eQ/R\) everywhere inside (Figure 18.9).
We can check the solid sphere’s central value, \(\tfrac32 k_eQ/R\), with \(V = \int dV\) directly. Divide the ball into thin spherical shells of radius \(r'\) and thickness \(dr'\). A shell has volume \(4\pi r'^2\,dr'\) and charge \(dq = \rho\,4\pi r'^2\,dr'\), where \(\rho = 3Q/4\pi R^3\), and every part of it is the same distance \(r'\) from the center. So at the center
\[V = \int k_e\frac{dq}{r'} = \int_0^R 4\pi k_e\rho\,r'\,dr' = 2\pi k_e\rho R^2 = \frac{3}{2}\,\frac{k_eQ}{R},\]
the same answer. Both routes are always available: add up \(dV = k_e\,dq/r\), or integrate a known field. Choose whichever makes the integral easier.
An infinite line. Not every distribution allows \(V = 0\) at infinity. An infinite line of charge extends to infinity itself. Summing \(dV\) over it diverges, as the long-rod limit of equation (18.12) showed, and so does integrating its field \(\lambda/2\pi\epsilon_0 r\) in from infinity. We can still find the potential difference between two distances \(r_a\) and \(r_b\) from the line:
\[V_b - V_a = -\int_{r_a}^{r_b}\frac{\lambda}{2\pi\epsilon_0 r}\,dr = \frac{\lambda}{2\pi\epsilon_0}\ln\frac{r_a}{r_b}. \tag{18.15}\]
The same result follows from equation (18.12): for a long rod, \(V_b - V_a \approx 2k_e\lambda\bigl[\ln(L/r_b) - \ln(L/r_a)\bigr] = 2k_e\lambda\ln(r_a/r_b)\), and the length \(L\) cancels. Only differences are physical, so this is all we ever need, and it is exactly what is needed for coaxial cables and the cylindrical capacitors of Chapter 19.
Example 18.10: Potentials of a ring, a disk, and a ball
Find the potential (a) on the axis of a ring of radius \(3.0\,\mathrm{cm}\) carrying \(+12\,\mathrm{nC}\), \(4.0\,\mathrm{cm}\) from its center; (b) on the axis of a disk of radius \(10.0\,\mathrm{cm}\) with \(\sigma = 5.0\,\mathrm{\mu C/m^2}\), \(2.0\,\mathrm{cm}\) from its center; and (c) at the center and at the surface of an insulating ball of radius \(5.0\,\mathrm{cm}\) carrying \(+20\,\mathrm{nC}\) uniformly.
Solution
(a) From equation (18.11), with \(\sqrt{x^2 + a^2} = 0.050\,\mathrm{m}\),
\[V = \frac{(8.99\times10^{9})(12\times10^{-9})}{0.050} = \boxed{2.2\times 10^{3}\,\mathrm{V}}.\]
(b) From equation (18.13), with \(\sigma/2\epsilon_0 = 2.82\times 10^{5}\,\mathrm{V/m}\),
\[V = (2.82\times10^{5})\left(\sqrt{(0.020)^2 + (0.100)^2} - 0.020\right) = \boxed{2.3\times 10^{4}\,\mathrm{V}}.\]
(c) At the surface, \(V = k_eQ/R = (8.99\times10^{9})(20\times10^{-9})/0.050 = \boxed{3.6\times 10^{3}\,\mathrm{V}}\), and at the center it is \(1.5\) times larger, \(\boxed{5.4\times 10^{3}\,\mathrm{V}}\). These are the same ring, disk, and ball whose fields were found in Chapter 16.
Checkpoint 18.5
A hollow metal sphere and a solid plastic sphere of the same radius carry the same total charge, spread uniformly over the metal sphere’s surface and through the plastic sphere’s volume. (a) Compare their potentials at a point outside. (b) Compare their potentials at the center. (c) Which has the stronger field at a point halfway from the center to the surface?
Answers to Checkpoints
Checkpoint 18.5. (a) Outside, both behave like a point charge \(Q\) at the center, so their potentials are equal: \(k_eQ/r\). (b) The plastic sphere’s center is at the higher potential. The metal sphere’s interior is at the surface potential, \(k_eQ/R\), since its interior field is zero. For the plastic sphere the field inside is not zero, so the potential keeps rising as you move inward, reaching \(3k_eQ/2R\) at the center. (c) The plastic sphere. Inside the metal sphere the field is zero; inside the plastic sphere, at \(r = R/2\), it is \(k_eQ(R/2)/R^3 = k_eQ/(2R^2)\).
This page titled 18.4: Potential of a Continuous Charge Arrangement was last modified on Thu, 12 Nov 2026 04:27:02 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.