19.4: Capacitors in Parallel and in Series

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    19.4: Capacitors in Parallel and in Series
    Two circuits: three capacitors in parallel across a battery, and three in series.
    Figure 19.5. Capacitors in combination. (a) In parallel, every capacitor is connected across the same two wires and has the same potential difference; the charges add. (b) In series, the same charge sits on every capacitor; the potential differences add. In the battery symbol, the longer line marks the positive terminal.
    Figure descriptionTwo circuit diagrams. In panel a, a battery of voltage V is connected to three capacitors C sub 1, C sub 2 and C sub 3 arranged side by side in parallel: each capacitor spans the same pair of horizontal wires, so each has the full voltage V across it. In panel b, the same battery drives three capacitors connected one after another in series around a single loop, so the same charge Q sits on each, and the individual voltages V sub 1, V sub 2 and V sub 3 add up to V.

    Circuits often contain several capacitors connected together, and it is useful to replace a group of them with a single equivalent capacitance that stores the same charge at the same voltage. In a circuit diagram, a capacitor is drawn as two short parallel lines, like the plates, and a battery as a long line and a short line side by side, the long one being the positive terminal (Figure 19.5). Chapter 21 develops circuit diagrams and circuit analysis fully; here two simple rules are enough. The wires connecting the elements are conductors, so each wire and everything attached directly to it is at a single potential. And charge is conserved.

    Capacitors in parallel. Capacitors connected side by side, so that one plate of each is attached to one wire and the other plate of each to another wire, are in parallel (Figure 19.5a). Each is connected directly across the same two wires, so each has the same potential difference \(V\). Their charges are \(Q_1 = C_1V\), \(Q_2 = C_2V\), and so on, and the total charge supplied by the battery is

    \[Q = Q_1 + Q_2 + \cdots = (C_1 + C_2 + \cdots)V.\]

    A single capacitor that stores this total charge at the same voltage has

    Key Equation: Capacitors in parallel

    \[C_{\text{eq}} = C_1 + C_2 + C_3 + \cdots. \tag{19.9}\]

    Capacitances in parallel simply add. This makes sense: connecting two parallel-plate capacitors in parallel is like making one capacitor with the combined plate area.

    Capacitors in series. Capacitors connected one after another, so that the second plate of one is wired only to the first plate of the next, are in series (Figure 19.5b). The battery moves charge \(Q\) onto the first plate of the first capacitor and pulls \(Q\) off the last plate of the last. The inner plates are connected only to each other, and that isolated piece of metal starts out neutral and must stay neutral, so when \(-Q\) appears on one of its plates, \(+Q\) appears on the other. Every capacitor in series therefore carries the same charge \(Q\). Their voltages, \(V_1 = Q/C_1\), \(V_2 = Q/C_2\), and so on, add up to the battery’s voltage:

    \[V = V_1 + V_2 + \cdots = Q\left(\frac{1}{C_1} + \frac{1}{C_2} + \cdots\right).\]

    A single capacitor that holds charge \(Q\) at voltage \(V\) has

    Key Equation: Capacitors in series

    \[\frac{1}{C_{\text{eq}}} = \frac{1}{C_1} + \frac{1}{C_2} + \frac{1}{C_3} + \cdots. \tag{19.10}\]

    The equivalent capacitance of capacitors in series is always smaller than the smallest of them. Connecting two parallel-plate capacitors in series is like making one capacitor with a larger plate separation. For two capacitors in series, equation (19.10) can be written \(C_{\text{eq}} = C_1C_2/(C_1 + C_2)\).

    Note: A strategy for capacitor networks

    Many networks can be reduced step by step. Find a group of capacitors that are purely in parallel or purely in series, replace it with its equivalent, redraw the circuit, and repeat until a single capacitor remains. Then work back out through the redrawn circuits. Remember which quantity is shared: parallel capacitors share the same \(V\), and series capacitors share the same \(Q\).

    Example 19.8: A capacitor network

    A \(6.0\,\mathrm{\mu F}\) capacitor \(C_1\) is connected in series with a parallel pair, \(C_2 = 2.0\,\mathrm{\mu F}\) and \(C_3 = 4.0\,\mathrm{\mu F}\), and the combination is connected to a \(12\,\mathrm{V}\) battery. Find (a) the equivalent capacitance, (b) the charge on and voltage across each capacitor, and (c) the total stored energy.

    Circuit: a 12 V battery with capacitor C1 in series with a parallel pair of capacitors.Figure descriptionA circuit diagram. A battery labeled 12 volts is connected in a loop. Along the top wire is capacitor C sub 1, 6 microfarads. On the right side, the loop splits into two parallel branches, one holding C sub 2, 2 microfarads, and the other holding C sub 3, 4 microfarads, which rejoin before returning along the bottom wire to the battery.
    Solution

    (a) \(C_2\) and \(C_3\) are in parallel: \(C_{23} = 2.0 + 4.0 = 6.0\,\mathrm{\mu F}\). This is in series with \(C_1\):

    \[C_{\text{eq}} = \frac{C_1C_{23}}{C_1 + C_{23}} = \frac{(6.0)(6.0)}{6.0 + 6.0} = \boxed{3.0\,\mathrm{\mu F}}.\]

    (b) The battery sees \(3.0\,\mathrm{\mu F}\), so the charge it supplies is \(Q = C_{\text{eq}}V = (3.0\,\mu\mathrm{F})(12\,\mathrm{V}) = 36\,\mathrm{\mu C}\). In series, \(C_1\) and the parallel pair carry this same charge: \(Q_1 = \boxed{36\,\mathrm{\mu C}}\) and \(V_1 = Q_1/C_1 = \boxed{6.0\,\mathrm{V}}\). The pair gets the remaining \(12 - 6.0 = 6.0\,\mathrm{V}\), and each of its members has that full voltage: \(V_2 = V_3 = \boxed{6.0\,\mathrm{V}}\), so \(Q_2 = C_2V_2 = \boxed{12\,\mathrm{\mu C}}\) and \(Q_3 = C_3V_3 = \boxed{24\,\mathrm{\mu C}}\). As a check, \(Q_2 + Q_3 = 36\,\mathrm{\mu C} = Q_1\).

    (c) \(U = \tfrac12 C_{\text{eq}}V^2 = \tfrac12(3.0\times10^{-6})(12)^2 = \boxed{216\,\mathrm{\mu J}}\). Adding the individual energies, \(\tfrac12 Q_1V_1 + \tfrac12 Q_2V_2 + \tfrac12 Q_3V_3 = 108 + 36 + 72 = 216\,\mathrm{\mu J}\), gives the same total.

    Checkpoint 19.4

    You have two capacitors, \(1\,\mathrm{\mu F}\) and \(3\,\mathrm{\mu F}\). (a) Without calculating exactly, which connection, series or parallel, gives the larger equivalent capacitance? (b) Connected in series to a battery, which capacitor has the larger voltage across it? (c) Which stores more energy?

    Answer

    Answers to Checkpoints

    Checkpoint 19.4. (a) Parallel. Parallel capacitances add (\(1 + 3 = 4\,\mathrm{\mu F}\)), while in series the equivalent is smaller than the smaller one (\(0.75\,\mathrm{\mu F}\)). (b) In series both carry the same charge \(Q\), so \(V = Q/C\) is larger across the smaller capacitor, the \(1\,\mathrm{\mu F}\) one: it has three times the voltage of the other. (c) Also the \(1\,\mathrm{\mu F}\) one. With equal charges, \(U = Q^2/2C\) is larger for the smaller capacitance, again by a factor of \(3\).


    This page titled 19.4: Capacitors in Parallel and in Series was last modified on Thu, 12 Nov 2026 04:26:46 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.