34.2: Diffraction by a Circular Aperture

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    34.2: Diffraction by a Circular Aperture

    Lenses, mirrors, telescopes, and eyes gather light through round openings, not slits, so their diffraction pattern is a set of concentric rings: a bright central disk (the Airy disk) ringed by faint circles. The mathematics is harder, but the result differs from the slit only by a numerical factor: the first dark ring of a circular aperture of diameter \(D\) lies at

    Key Equation: Circular-aperture first minimum

    \[\sin\theta = 1.22\,\frac{\lambda}{D}. \tag{34.4}\]

    Three side-by-side intensity graphs showing two point sources at decreasing separation.
    Figure 34.4. Rayleigh’s criterion. Two point sources each make a diffraction pattern. (a) Well separated, they show two clear peaks. (b) At the Rayleigh limit, one peak sits on the other’s first minimum: just resolved, a shallow dip remains. (c) Closer still, the patterns merge into a single blur and the sources cannot be told apart.
    Figure descriptionThree side-by-side intensity graphs showing two point sources at decreasing separation. In panel (a), resolved, the two peaks stand well apart with a deep valley between them. In panel (b), just resolved, the peaks have moved close enough that one sits on the other's first minimum; a shallow dip still separates them, which is the Rayleigh limit. In panel (c), unresolved, the peaks have merged into a single broad hump with no dip at all, and the two sources can no longer be told apart.

    The factor \(1.22\) is the only memento of the round geometry. This sets the ultimate limit on resolving detail. Two distant point sources (two stars, two cells under a microscope) each make their own Airy disk; if the disks overlap too much, they smear into one. The standard line is Rayleigh’s criterion: two sources are just resolved when the center of one diffraction pattern falls on the first minimum of the other (Figure 34.4). The smallest angular separation they can have and still be told apart is therefore

    Key Equation: Rayleigh’s criterion

    \begin{align}\theta_{\min} &= \frac{\lambda}{a} && {\text{(slit of width }a\text{)}}, \tag{34.5} \\ \theta_{\min} &= 1.22\,\frac{\lambda}{D} && {\text{(circular aperture of diameter }D\text{)}}. \tag{34.6}\end{align}

    The slit version is the easiest to picture (Figure 34.5). Light from two distant sources reaches the slit from directions an angle \(\theta\) apart, and each source makes its own single-slit pattern on the screen, shifted from the other by that angle. The two sources are independent (incoherent), so their intensities simply add. When the shift equals \(\lambda/a\), the peak of one pattern lands exactly on the first zero of the other, and the total shows two humps with a dip to about \(81\%\) between them: just resolved. Bring the sources closer and the dip fills in until only a single hump remains, as in Figure 34.4(c). A circular aperture works the same way, with its first zero at \(1.22\lambda/D\) in place of \(\lambda/a\).

    Resolving two sources with a single slit, in two panels.
    Figure 34.5. Resolving two sources with a slit. (a) Light from two distant sources reaches a slit of width \(a\) from directions \(\theta_{\min}\) apart. (b) Each source alone gives a single-slit pattern (dashed); the screen shows their sum (solid). When \(\theta_{\min} = \lambda/a\), the peak of one pattern sits on the first zero of the other and the total dips to about \(81\%\) between the peaks: the two sources are just resolved.
    Figure descriptionResolving two sources with a single slit, in two panels. Panel a: a slit of width a, with light from two very distant stars arriving from the left: a blue ray from source 1 straight on, and a green ray from source 2 arriving at a small angle theta min to it. Panel b: intensity against angle theta. A dashed blue curve is source 1's single-slit pattern, peaked at zero. A dashed green curve is source 2's identical pattern, shifted so its peak sits at lambda over a, exactly on source 1's first zero, marked with a dotted line. A solid red curve, their sum and what the screen actually shows, has two peaks with a dip to about 81 percent between them. A double arrow above marks the peak separation theta min equals lambda over a. The panel is labeled just resolved.

    The lesson is built into the formula: to resolve finer detail, use a shorter wavelength or a bigger aperture. This single relation explains why research telescopes are enormous, why electron microscopes (tiny wavelength) outresolve light microscopes, and why your pupil’s few millimeters set a limit on the fine print you can read.

    Example 34.2: The resolution of the eye

    Light of wavelength \(500\,\mathrm{nm}\) enters an eye with a daytime pupil diameter of about \(2\,\mathrm{mm}\). (a) Estimate the eye’s diffraction-limited angular resolution. (b) At a reading distance of \(L = 25\,\mathrm{cm}\), what is the smallest separation between two dots the eye can just distinguish?

    Solution

    (a) By Rayleigh’s criterion for a circular aperture,

    \[\theta_{\min} = 1.22\,\frac{\lambda}{D} = 1.22\,\frac{500\times10^{-9}\,\mathrm{m}}{2\times10^{-3}\,\mathrm{m}} = \boxed{3.05\times10^{-4}\,\mathrm{rad}},\]

    about one arcminute: the rule of thumb for normal eyesight.

    (b) The smallest resolvable separation is

    \[d = L\,\theta_{\min} = (0.25\,\mathrm{m})(3.05\times10^{-4}) = \boxed{7.6\times10^{-5}\,\mathrm{m} \approx 0.08\,\mathrm{mm}}.\]

    Finer than this and the two dots blur into one, which is exactly the principle a printer relies on, and the reason a screen’s pixels vanish at normal viewing distance.

    Example 34.3: Telescopes, optical and radio

    (a) Each Keck telescope has an effective diameter of \(10\,\mathrm{m}\). Find its resolution at \(600\,\mathrm{nm}\). (b) The Arecibo radio dish was \(305\,\mathrm{m}\) across and observed at \(\lambda = 0.75\,\mathrm{m}\). Compare its angular resolution with Keck’s.

    Solution

    (a) For Keck,

    \[\theta_{\min} = 1.22\,\frac{600\times10^{-9}\,\mathrm{m}}{10\,\mathrm{m}} = \boxed{7.3\times10^{-8}\,\mathrm{rad}},\]

    about fifteen thousandths of an arcsecond: extraordinarily sharp.

    (b) For Arecibo,

    \[\theta_{\min} = 1.22\,\frac{0.75\,\mathrm{m}}{305\,\mathrm{m}} = \boxed{3.0\times10^{-3}\,\mathrm{rad}}.\]

    Despite its vastly larger dish, Arecibo’s resolution is about \(40{,}000\) times worse than Keck’s, because its wavelength is larger by an even greater factor. Resolution is set by the ratio \(\lambda/D\), not by size alone: a humbling fact for radio astronomy, which compensates by linking dishes continents apart into a single interferometer.

    Checkpoint 34.2

    Two headlights of a distant car are \(1.5\,\mathrm{m}\) apart. Using the eye’s resolution from the worked example, estimate the greatest distance at which you could still see them as two separate lights rather than one. (Set the angular separation equal to \(\theta_{\min}\).)

    Answer

    Answers to Checkpoints

    Checkpoint 34.2. The headlights are just resolved when their angular separation equals \(\theta_{\min} = 3.05\times10^{-4}\,\mathrm{rad}\). For small angles the separation is \(s/L\), so \(L = s/\theta_{\min} = (1.5\,\mathrm{m})/(3.05\times10^{-4}) \approx 4.9\times 10^{3}\,\mathrm{m}\), about \(5\,\mathrm{km}\). Beyond that, the two lights blur into one.


    This page titled 34.2: Diffraction by a Circular Aperture was last modified on Thu, 12 Nov 2026 04:27:10 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.