Opening the book…
Lab 4.2
Name:
Date:
Assessing Muscle Strength with 1-RM
This lab includes one-repetition maximum (1-RM) testing for both upper and lower body muscular strength. This is the standard for assessing individual strength, as it measures the greatest amount of resistance that can be moved through a full range of motion in good form. This is the most accurate method for testing strength.
- Any individual should not use the 1RM test without strength-training experience. There are other tests for individuals who are beginning a strength training program to calculate accurate resistance.
Upper Body Strength: Bench Press
The bench press is the standard exercise for calculating upper-body strength.
Equipment
- Bench-press machine or a flat bench with barbell, weight plates, and collars
- A spotter
- Weight Scale (to measure body weight)
Preparation
Perform a general warm-up to raise your heart rate. Warm-up on the bench press by performing 1 set of 10 repetitions using a light weight.
- Start on the bench with your feet flat and avoid arching your back.
- If your feet do not reach the floor without arching your back, then place your feet on the bench.
- Grasp the bar with your hands shoulder-width apart, with your palms upward. The bar or free weights should be centered over the middle of your chest.
- Fully extend your arms, without fully locking the elbow joint.
- Lower the bar or weights slowly to your chest, then press them in the same straight line back to the starting position.
- Avoid holding your breath or letting the bar or weights touch your chest.
Instructions for the 1-RM Test
- Start with 50-70% of the amount of weight you think you can lift.
- Lift that amount of resistance with good form one time.
- Increase the weight with each attempt, resting 3-5 minutes between each attempt.
- If you lifted the weight easily, add 20 or more pounds; if you are close to your 1-RM, add smaller amounts of resistance (about 5 pounds).
- The goal is to reach your 1-RM in 4-5 attempts.
- Your 1-RM is the final amount of weight you lifted with good form.
Bench Press 1-RM: ____________________
To estimate 1-RM from multiple repetitions
Choose a weight that is an amount you think you can lift approximately 10 times.
Using correct form, perform as many repetitions as you can.
Estimate your 1-RM with the Brzycki formula (Aragon, 2021). [3]
Bench Press 1-RM = (Resistance: ________lbs) ÷ 1.0278 - (0.0278 X repetitions completed: _______)
Results
Divide your 1-RM score by your body weight:
1-RM ______lb ÷ body weight_______lb = ________ bench-press weight ratio
Find your rating for your bench press in Table \(\PageIndex{1}\) for biological males and in Table \(\PageIndex{2}\) for biological females.
Rating:_____________
| Age | Superior | Excellent | Good | Fair | Poor |
|---|---|---|---|---|---|
| < 20 | > 1.76 | 1.34 – 1.37 | 1.19 – 1.29 | 1.06 – 1.18 | < 1.01 |
| 20-29 | > 1.63 | 1.32 – 1.48 | 1.14 – 1.26 | 0.99 – 1.10 | < 0.96 |
| 30-39 | > 1.35 | 1.12 – 1.24 | 0.98 –1.08 | 0.88 – 0.96 | < 0.86 |
| 40-49 | > 1.20 | 1.00 – 1.10 | 0.88 – 0.96 | 0.80 – 0.86 | < 0.78 |
| 50-59 | > 1.05 | 0.90 – 0.97 | 0.80 – 0.87 | 0.71 – 0.77 | < 0.70 |
| 60+ | > 0.94 | 0.82 – 0.89 | 0.72 – 0.79 | 0.66 – 0.70 |
< 0.65 |
| Age | Superior | Excellent | Good | Fair | Poor |
|---|---|---|---|---|---|
| < 20 | > 0.88 | 0.77 – 0.83 | 0.65 – 0.76 | 0.58 – 0.64 | < 0.57 |
| 20-29 | > 1.01 | 0.80 – 0.90 | 0.70 – 0.77 | 0.59 – 0.68 | < 0.58 |
| 30-39 | > 0.82 | 0.70 – 0.76 | 0.60 – 0.65 | 0.53 – 0.58 | < 0.52 |
| 40-49 | > 0.77 | 0.62 – 0.71 | 0.54 – 0.60 | 0.50 – 0.53 | < 0.48 |
| 50-59 | > 0.68 | 0.55 – 0.61 | 0.48 – 0.53 | 0.44 – 0.47 | < 0.43 |
| 60+ | > 0.72 | 0.54 – 0.64 | 0.47 – 0.53 | 0.43 – 0.46 | < 0.41 |
According to the Cooper Institute for Aerobic Research, Table \(\PageIndex{1}\) and Table \(\PageIndex{2}\) indicate the ratings of muscular strength in biological males and females based on the amount of weight lifted once with proper form, the bench press 1-RM (Chen et al, 2022). [6] In terms of percentiles, here are what the ratings indicate regarding individual strength:
- Superior = over the 80th percentile
- Excellent = between 60th and 80th percentiles
- Good = between 40th and 60th percentiles
- Fair = between 20th and 40th percentiles
- Poor = below the 20th percentile
Lower Body Strength: Leg Press
The leg press is the standard exercise for calculating lower-body muscular strength.
Equipment
- Leg-Press Machine
- Weight Scale (to measure body weight)
Preparation
Perform a general warm-up to raise your heart rate. Warm-up on the leg press machine by performing 1 set of 10 repetitions using a light weight.
- Sit or lie on the seat or bench of the machine.
- Adjust it so that your head, back, and buttocks are against the pads and your hands can grasp the panels.
- Your feet should be about shoulder-width apart, and your knees comfortably bent and in line with your feet.
- Keep your feet flat on the footplate and push to straighten with your legs, move through the full range of motion, but avoid locking your knees.
- Return to the starting position by slowly lowering the weight with control.
- Keep your head and back in a steady position.
- Each repetition should take 4-5 seconds.
Instructions
- Start with 50-70% of the amount of weight you think you can press.
- Press that amount of resistance with good form one time.
- Increase the weight with each attempt, resting 3-5 minutes between each attempt.
- If you lifted the weight easily, add 20 or more pounds; if you are close to your 1-RM, add smaller amounts of resistance (about 5 pounds).
- The goal is to reach your 1-RM in 4-5 attempts.
- Your 1-RM is the final amount of weight you lifted with good form.
Leg Press Press 1-RM: _________
To estimate 1-RM from multiple repetitions
Choose a weight that is an amount you think you can lift approximately 10 times.
Using correct form, perform as many repetitions as you can.
Estimate your 1-RM with the Brzycki formula[3]:
Leg Press 1-RM = (Resistance: _________ lbs) ÷ 1.0278 - (0.0278 x repetitions completed _________)
Results
Divide your 1-RM score by your body weight:
Leg Press 1-RM _________ lb ÷ body weight _________ lb = _________ leg-press weight ratio
Find your rating for your bench press in Table \(\PageIndex{3}\) for biological males and in Table \(\PageIndex{4}\) for biological females.
Rating: _________
| Age (Years) | Well Above Average | Above Average | Average | Below Average | Well Below Average |
|---|---|---|---|---|---|
| 20-29 | > 2.12 | 1.97 – 2.12 | 1.83 – 1.96 | 1.63 – 1.82 | < 1.63 |
| 30-39 | > 1.92 | 1.77 – 1.92 | 1.65 – 1.76 | 1.52 – 1.64 | < 1.52 |
| 40-49 | > 1.81 | 1.68 – 1.81 | 1.57 – 1.67 | 1.44 – 1.56 | < 1.44 |
| 50-59 | > 1.70 | 1.58 – 1.70 | 1.46 – 1.57 | 1.32 – 1.45 | < 1.32 |
| 60+ | > 1.61 | 1.49 – 1.61 | 1.38 – 1.48 | 1.25 – 1.37 | < 1.25 |
| Age (Years) | Well Above Average | Above Average | Average | Below Average | Well Below Average |
|---|---|---|---|---|---|
| 20-29 | > 1.67 | 1.50 – 1.67 | 1.37 – 1.49 | 1.22 – 1.36 | < 1.22 |
| 30-39 | > 1.46 | 1.33 - 1.46 | 1.21 – 1.32 | 1.09 – 1.20 | < 1.09 |
| 40-49 | > 1.36 | 1.23 – 1.36 | 1.13 – 1.22 | 1.02 – 1.12 | < 1.02 |
| 50-59 | > 1.24 | 1.10 – 1.24 | 0.99 – 1.09 | 0.88 – 0.98 | < 0.88 |
| 60+ | > 1.17 | 1.04 – 1.17 | 0.93 – 1.03 | 0.85 – 0.92 | < 0.85 |
According tothe Cooper Institute for Aerobic Research, Table \(\PageIndex{1}\) and Table \(\PageIndex{2}\) indicate the ratings of muscular strength in biological males and females. (Chen et al, 2022). [6] In terms of percentiles, here are what the ratings indicate in regarding individual strength:
- Well Above Average = over the 80th percentile
- Above Average = between 60th and 80th percentiles
- Average = between 40th and 60th percentiles
- Below Average = between 20th and 40th percentiles
- Well Below Average = below the 20th percentile
Summary of Results
Fill in the scores and ratings for the tests you performed in Table \(\PageIndex{5}\).
| Test | Actual 1-RM | Estimated 1-RM | Rating of Ratio |
|---|---|---|---|
| Bench Press | |||
| Leg press |
Table \(\PageIndex{5}\): Summary of Results by Danielle Altman is licensed CC BY-NC 4.0
Reflecting on Your Results
Answer the following questions to be able to understand better your awareness of your current muscular strength levels.
- Are you surprised by your test results and ratings?
- Did your test results match how much muscle strength you have in your upper-body and lower-body?
Taking Action
Muscular strength is tends to be refection of training. If your scores were lower than expected, you likely want to get stronger by beginning a new program or making changes to your existing muscular strength/endurance program. If you scored well, then you may opt to keep your regimen the same to maintain your level of fitness. You might also want to add to your routine to promote strength gains with additional exercises or increased weight.
Your next steps include setting S.M.A.R.T. goals for improvement and creating a workout plan to achieve them.
- Use Lab 4.11.4 "Creating a Program" to describe your goals and the specific steps you will take to improve your muscular strength.
- Repeat these 1-RM tests every 3-4 weeks to measure your progress and improvements.
- What effect did your plan have on your muscular strength?
- Did your test scores improve?
- Do you feel stronger?
This page titled 4.2: Assessing Muscle Strength was last modified on Mon, 31 Aug 2026 22:48:29 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Danielle Altman, Rusty Johnson, and Cheryl Owiesny.
The book could not be loaded just now.