Opening the book…
Blood flow is the force coursing through the body, an essential process quantified by the volume of blood moving through vessels per unit of time. Initiated by the rhythmic contractions of the ventricles of the heart, blood travels from higher to lower pressure areas. This concept is closely intertwined with hydrostatic pressure, a force exerted by fluids, typically against the walls of their containing structures, a phenomenon vividly illustrated by blood pressure. While blood pressure encompasses measurements across various components of the circulatory system, it generally alludes to systemic arterial blood pressure, which quantifies the blood pressure within the arteries of the systemic circulation. This vital parameter is expressed in millimeters of mercury (mm Hg) in clinical practice. Measurements are most commonly performed using the brachial artery situated in the arm. However, it is worth noting that blood pressure can also be assessed in capillaries, veins, and the vessels of pulmonary circulation. For ease and everyday usage, blood pressure without any specific context, refers to systemic arterial blood pressure. Its quantification is pivotal in diagnosing and managing various health conditions, making it a cornerstone of medical evaluation and the understanding of circulatory dynamics.11
Components of Arterial Blood Pressure

Figure 7 | Systemic Blood Pressure | 12 The graph shows the components of blood pressure throughout the blood vessels, including systolic, diastolic, mean arterial, and pulse pressures.
Every heartbeat sends approximately 80 mL of blood coursing through the arteries. Once the aortic valve closes, blood keeps moving forward due to its initial momentum and the rebound effect from the elastic arteries. In these larger vessels, blood flow occurs with ease as their wide lumens and minimal pressure differences allow for swift transport. This phenomenon can be elucidated using Ohm's law, where total conductance is the sum of individual organ conductances. An advantageous aspect of this arrangement is each organ's capacity to modulate its own blood flow through adjustments in resistance. This dynamic mechanism permits the redistribution of cardiac output across different organ beds with only slight alterations in arterial pressure.
Systemic arterial blood pressure is recorded as a ratio of two numbers, with a typical example being 120/80 for a normal adult. This figure denotes the systolic pressure over diastolic pressure. The systolic pressure is higher (typically around 120 mm Hg) and mirrors the arterial pressure when blood is forcefully ejected during ventricular systole. In contrast, at the lower value (usually approximately 80 mm Hg), the diastolic pressure reflects arterial pressure when the ventricles are relaxed.
Pulse Pressure
As seen in Figure 7, the differential between the systolic and diastolic pressure is known as the pulse pressure. For instance, if systolic pressure measures 120 mm Hg and diastolic pressure is 80 mm Hg, the pulse pressure equals 40 mm Hg. The pulse pressure should typically be at least 25 percent of the systolic pressure. It is characterized as low or narrow if it falls below this threshold, which may be observed in conditions such as congestive heart failure, aortic valve stenosis, or severe blood loss following trauma or surgery. In contrast, high or wide pulse pressure is common in healthy individuals after intense exercise, with their resting pulse pressure of 30-40 mmHg temporarily spiking to 100 mm Hg due to increased stroke volume. A persistently high pulse pressure, often at or above 100 mm Hg, may indicate excessive resistance in the arteries and can be associated with various medical conditions. Chronic high resting pulse pressures can detrimentally affect the heart, brain, and kidneys, necessitating medical intervention.
Mean Arterial Pressure
Mean arterial pressure (MAP) is the average blood pressure within the arteries, orchestrating the driving force propelling blood into vessels nourishing our tissues. Although measuring MAP directly is complex, it can be approximated by adding the diastolic pressure to one-third of the pulse pressure. In Figure 7, this approximate value equals 93.33 mm Hg, calculated as 80 + (120 - 80)/3. Typically, MAP falls within the range of 70-110 mm Hg. When it drops below 60 mm Hg for an extended period, blood pressure ceases to be sufficient for optimal tissue circulation, leading to ischemia or inadequate blood flow.
This page titled 10.5: Blood Flow, Blood Pressure, and Resistance was last modified on Tue, 20 Oct 2026 23:17:34 GMT and is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by Chaya Gopalan (Consortium of Academic and Research Libraries in Illinois (CARLI)) .
The book could not be loaded just now.