Opening the book…
Figure 10 | Relationships among Vessels in the Systemic Circuit | 15 The relationships among blood vessels that can be compared include (a) vessel diameter, (b) total cross-sectional area, (c) average blood pressure, and (d) velocity of blood flow.
Figure 10 provides a comparative view of vessel diameter, total cross-sectional area, average blood pressure, and blood velocity across the systemic vessels. Each of these relationships among vessels will be discussed in detail here.
(a) Vessel Diameter: The primary factor in controlling vessel dynamics is vessel diameter, which exerts a significant influence on blood flow and resistance. Arteries, located closest to the heart, have relatively large diameters, but as blood moves further from the heart, vessel diameters progressively decrease. Arterioles, with their smaller radii, play a crucial role in regulating resistance and controlling blood flow. Capillaries, in contrast, are extremely small, with diameters much narrower than other vessels. This structure allows capillaries to efficiently facilitate the exchange of gasses, nutrients, and waste products with surrounding tissues. Due to their extensive network, capillaries serve as the primary site for these critical exchanges.
The regulation of vessel diameters through vasodilation and vasoconstriction enables the body to manage blood pressure and blood flow distribution. Vasoconstriction of arterioles increases resistance, reducing blood flow and raising blood pressure, while vasodilation decreases resistance, allowing for increased blood flow and lowering blood pressure. These adjustments ensure that the body maintains an appropriate blood supply, responding dynamically to various physiological needs and conditions.
(b) Total Cross-Sectional Area: An insight into the total cross-sectional area of various blood vessel types reveals the prominence of the body's capillary beds. These beds boast an expansive cross-sectional area, far surpassing other vessel types. While the diameter of an individual capillary is considerably smaller than its counterparts, the sheer number of capillaries dwarfs the quantities seen in other vessel types.
(c) Blood Pressure Distribution: The graph shows an uneven drop in blood pressure as it travels from arteries to arterioles, capillaries, venules, and veins. The arterioles take the spotlight as the site of the most abrupt pressure drop. Consequently, arterioles assume a pivotal role in blood pressure regulation, overshadowing the influence of vasodilation and vasoconstriction in other vessels.
(d) Blood Flow Velocity: The velocity of blood flow decreases progressively as it moves through arteries, arterioles, and capillaries, allowing sufficient time for essential exchange processes to occur. Upon reaching the veins, the velocity increases as blood returns to the heart.
A Mathematical Approach to Factors Affecting Blood Flow
Modified Ohm’s law to explain blood flow:
\[Q=\dfrac{\left(P_1-P_2\right)}{R} \nonumber \]
\(Q\)= flow, \(R\)= resistance, \(P_1\) = pressure in one end and \(P_2\) = pressure in the other end which is also represented as \(\delta P\)
Jean Louis Marie Poiseuille, a renowned French physician and physiologist, formulated a fundamental mathematical equation that describes the relationship between blood flow and several key variables. While a detailed understanding of the equation's mathematical basis is not necessary for grasping the nature of blood flow, it can enhance the comprehension of these relationships. The equation is based on three primary factors: vessel radius (\(r\)), vessel length (\(\gamma\)), and blood viscosity (\(\eta\)).
\[\text { Blood flow }=\dfrac{\pi \Delta P r^4}{8 \eta \lambda} \nonumber \]
-
\(\pi\), the Greek letter pi, serves as the symbol for the mathematical constant representing the ratio of a circle's circumference to its diameter, often approximated as 3.14.
-
\(\Delta P\) symbolizes the pressure difference (in millimeters of mercury, mm Hg).
-
\(r^4\) is the vessel's radius (half its diameter) raised to the fourth power (in centimeters, cm).
-
\(\eta\), the Greek letter eta, signifies the blood's viscosity.
-
\(\gamma\), represented by the Greek letter lambda, denotes the length of a blood vessel (in centimeters, cm).
The relationship between blood flow and resistance is Blood flow = \(\Delta P\)/Resistance. A slight rearrangement of this equation offers Resistance = \(\Delta P\)/Blood flow. By substituting Pouseille’s equation for blood flow:
\[\text { Resistance }=\dfrac{8 \eta \lambda}{\pi r^4} \nonumber \]
8 and \(\pi\) are constants. Two of the variables, viscosity and vessel length, will change slowly in the body. Only one of these factors, the radius, can be changed rapidly by vasoconstriction and vasodilation, thus dramatically impacting resistance and flow. Further, small changes in the radius will greatly affect the flow, since it is raised to the fourth power in the equation. In contrast, the radius can undergo rapid transformations through vasoconstriction and vasodilation, significantly altering resistance and flow. Even small modifications in the radius hold great sway as it is raised to the fourth power in the equation.
Laminar and Turbulent Blood Flow

Figure 11 | Laminar and Turbulent Flow Patterns | 16 This illustration contrasts laminar and turbulent blood flow within a vessel. On the left, laminar flow is depicted, showing organized, parallel layers of fluid moving at consistent velocities, indicated by the uniform arrows. On the right, turbulent flow is depicted, showing disorganized, irregular flow patterns with eddies and mixing, indicated by the curved arrows. The gray bars represent the vessel walls.
In the circulatory system, blood typically flows through most major vessels in a laminar pattern, characterized by smooth, organized movement. A thin layer of plasma adheres to the vessel wall, held stationary by cohesive forces, resulting in zero movement and no friction against the wall. Beneath this stationary layer, successive layers of blood move progressively faster, with the highest velocity occurring at the vessel's center, where the fluid layers overlap. The frictional resistance to flow arises from the lack of slippage between these adjacent layers. The heart's primary function is to generate the force necessary to overcome this resistance.
Laminar flow holds true up to a specific velocity threshold, after which this organized pattern disintegrates, and particles within the blood follow erratic and unpredictable trajectories, giving rise to turbulent flow. Laminar flow is silent, while turbulence generates audible sounds. Turbulence is generally an exception, seen only in the ascending aorta during the peak of systolic ejection. Reynold's number defines this transition from laminar to turbulent flow.
\[\text { Reynold's Number }=\frac{\text { flow velocity }(\mathrm{cm} / \mathrm{sec}) x \text { vessel diameter }(\mathrm{cm}) x \text { liquid density }\left(\mathrm{g} / \mathrm{cm}^3\right)}{\text { Viscosity of liquid }} \nonumber \]
Increasing the velocity or broadening the vessel encourages turbulence, while elevated viscosity discourages it. Furthermore, cuff blood pressure measurements can lead to turbulence when arteries are compressed. In anemia, for example, where the viscosity decreases, turbulence occurs, leading to the recognizable systolic murmurs. Nonetheless, it is important to note that these principles about flow types fundamentally apply to rigid tubes. One should remember that blood flow is pulsatile rather than constant when applied to blood vessels.17
This page titled 10.8: Relationships among Vessels in the Systemic Circuit was last modified on Mon, 24 Mar 2025 20:40:52 GMT and is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by Chaya Gopalan (Consortium of Academic and Research Libraries in Illinois (CARLI)) .
The book could not be loaded just now.