2.3.6: Action Potential

Essentials of Physiology for Nurse Anesthetists (Gopalan) · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY-NC-SA 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    2.3.6: Action Potential

    Action potential stands as the principal means through which neurons communicate. The alteration in membrane potential of modest amplitude is denoted as a graded potential. When this graded potential attains substantial magnitude, it can elicit an action potential before reverting to the standard resting membrane potential. Typically, the region of the excitable membrane where graded potentials manifest might not itself generate action potentials. An example of this domain is the dendrite. Here, current spreads passively from the site of a graded potential, depolarizing adjacent membrane regions until the signal reaches the initial segment.

    During an action potential, the changes in permeability to sodium and potassium ions are intricately orchestrated to initiate, propagate, and ultimately restore the membrane potential of a cell. These changes are produced by the opening and closing of voltage-gated ion channels in response to specific changes in membrane voltage. An action potential can be generated if a stimulus is capable of allowing the opening of specific ion channels. A high concentration of ion channels distinguishes the initial segment from the rest of the neuron. Upon the arrival of a depolarizing stimulus, sodium ion channels open, fostering an influx of sodium ions into the cell and, thus, a decrease in membrane potential from -70 mV to -55 mV. Upon reaching this threshold, voltage-gated sodium and potassium channels are activated. Threshold alludes to the voltage point at which these channels undergo activation. Notably, any degree of depolarization that fails to raise the membrane potential to -55 mV will remain subthreshold, precluding the instigation of an action potential. Conversely, any stimulus that propels the membrane potential beyond -55 mV will incite many channels to open in a positive feedback manner, heralding the initiation of an action potential. Acknowledging that the threshold is contingent upon the specific cell type participating in action potential generation is pertinent. For instance, the threshold for tactile discernment would differ between a tactile receptor and a thermoreceptor.

    Upon reaching the threshold, a rapid and profound depolarization takes place. This phenomenon arises due to the delay in opening voltage-gated potassium channels, leading to a pronounced sodium ion conductance in the cell (Figure 13). The robust concentration gradient governing sodium ion movement is so formidable that sodium ions continue to infiltrate the cell until it reaches +30 mV. During this phase, the recorded potential exhibits an abrupt ascent, signifying an intracellular positivity relative to the extracellular domain.

    Graph showing voltage changes over time during an action potential. Labels: resting state, stimulus, depolarization, repolarization, after hyperpolarization. Threshold at -55 mV.
    Figure 13 | Action Potential | 17 This schematic depicts an action potential, a rapid and transient change in membrane potential observed in excitable cells, such as neurons. The figure highlights key stages, including depolarization, repolarization, and hyperpolarization, as ions move across the cell membrane.

    Although both voltage-gated sodium and potassium channels were activated simultaneously, potassium ion channels are slow to open. They begin to open as the membrane potential reaches +30 mV, catalyzing the efflux of potassium ions from the cell. As potassium ions depart the cell, the membrane potential reverts to its resting level. This rapid restoration of the membrane potential to its resting voltage is repolarization—a phenomenon characterized by the return toward the -70 mV benchmark emblematic of the resting membrane potential. Notably, the repolarization process reinstates the membrane potential to the -70 mV resting value and extends slightly beyond it. Consequently, a hyperpolarization phase ensues while the potassium ion channels remain active; this period is termed after hyperpolarization. The slight delay in the closure of potassium ion channels accounts for this transient overshoot (Figure 13). Potassium ions continue to exit the cell, eliciting increased membrane negativity, thus yielding the hyperpolarizing overshoot. Following this, the channel undergoes closure once again, enabling the membrane to return to its resting potential. This restoration is facilitated by the ongoing operation of non-gated channels and the activity of the sodium-potassium exchange pump.

    A threshold voltage engenders a binary outcome for the action potential—either it materializes or does not. Failure to attain the threshold precludes the occurrence of an action potential. Should the threshold be surmounted, the action potential unfolds and follows its prescribed course. Notably, these sequences remain consistent across all action potentials, implying a predetermined sequence once the threshold is reached. A more potent stimulus that induces depolarization beyond the threshold does not engender an augmented magnitude of the action potential. An all-or-none response inherently characterizes action potentials. Either the membrane potential achieves the threshold, and the complete sequence transpires as described above, or the membrane fails to meet the threshold, and no further developments occur (Figure 14). All action potentials culminate at an identical peak voltage of +30 mV, rendering them equivalent in amplitude. While more potent stimuli can incite a more rapid succession of multiple action potentials, the fundamental individual signal remains invariant (Figure 15).

    Graph illustrating response to stimulus strength. Below the threshold, no response; above it, full response occurs. Black arrows indicate strength, red lines show response beyond threshold.
    Figure 14 | The All-or-None Response of an Action Potential | 18 The graph depicts the characteristic behavior of an action potential, illustrating the concept of the 'All-or-None' response. When the stimulus strength does not reach a threshold, it cannot elicit an action potential. On the other hand, a stimulus of any strength that reaches the threshold generates an action potential.
    Graph showing three levels of stimulus duration: intense (blue, frequent lines), medium (red, moderate lines), and weak (green, sparse lines) against time on the X-axis.
    Figure 15 | Frequency-Response Relationship of Action Potentials to Stimulus Strength | The graph illustrates the relationship between the frequency of action potentials and the strength of the applied stimulus, showcasing the neuron's response across different intensities. A weak stimulation generates fewer action potentials compared to an intense one.
    Diagram showing ion transport across a membrane with four stages, each featuring channels, pumps, and ions in various states. Center includes a graph illustrating ion concentration changes over time.
    Figure 16 | Ion Movement During an Action Potential | 19 In the stages of an action potential, the permeability of the membrane of the neuron changes. At the resting state (1), sodium and potassium ions have limited ability to pass through the membrane, and the neuron has a net negative charge inside. Once the action potential is triggered, the depolarization (2) of the neuron activates sodium channels, allowing sodium ions to pass through the cell membrane into the cell, resulting in a net positive charge in the neuron relative to the extracellular fluid. After the action potential peak is reached, the neuron begins repolarization (3), where the sodium channels close and potassium channels open, allowing potassium ions to cross the membrane into the extracellular fluid, returning the membrane potential to a negative value. Finally, there is a refractory period (4), during which the voltage-dependent ion channels are inactivated while the \(Na+) and (K+) ions return to their resting state distributions across the membrane (1), and the neuron is ready to repeat the process for the next action potential. Key: a) Sodium ion (Na+). b) Potassium ion (K+). c) Sodium channel. d) Potassium channel. e) Sodium-potassium pump.
    Graph showing an action potential curve with labeled phases: depolarization (red), repolarization (blue), and hyperpolarization (green). Ion channel activity notes are marked along the curve.
    Figure 17 | Action Potential and Refractory Period | During the refractory period, the neuron is temporarily unresponsive to further stimuli. It consists of two phases: the absolute refractory period, where no stimulus can induce another action potential, and the relative refractory period, during which a stronger-than-usual stimulus is required.

    An action potential in a neuron unfolds within approximately two milliseconds. While an action potential is actively transpiring, initiating another action potential is precluded—an occurrence termed the refractory period (Figure 16). The refractory period comprises two distinct phases: absolute and relative refractory periods (Figure 17). Within the absolute phase, the initiation of another action potential remains impossible. This constraint arises due to the inactivation gate of the voltage-gated sodium ion channel. A fresh action potential can be initiated only once the voltage-gated sodium ion channel has reverted to its resting configuration, characterized by a membrane potential below -55 mV. However, such initiation necessitates a more potent stimulus than the one that initially triggered the ongoing action potential. This response is attributed to the outward flow of potassium ions. The efflux of potassium ions establishes conditions wherein the influx of sodium ions would fail to bring about depolarization, merely serving to forestall hyperpolarization of the cell.

    Depolarization Phase and Sodium Permeability (pNa): At the beginning of an action potential, the permeability of the cell membrane rapidly increases to sodium ions due to the activation of voltage-gated sodium channels. These channels open in response to a depolarization of the membrane beyond a specific threshold voltage. As sodium channels open, sodium ions rush into the cell, rapidly increasing the positive charge. This influx of positively charged sodium ions causes a significant depolarization of the membrane potential, transitioning it from the resting potential (around -70 mV) toward a more positive value (Figure 18).

    Repolarization Phase and Potassium Permeability (pK): Following the depolarization phase, the permeability to sodium ions decreases significantly as sodium channels are inactivated. Concurrently, the permeability to potassium ions increases. Voltage-gated potassium channels, initially closed or partially closed, start opening more fully in response to depolarization, which allows potassium ions to move out of the cell. As potassium ions exit the cell, the membrane potential gradually returns to its resting state, a process known as repolarization (Figure 18).

    Graph showing action potential, with membrane potential on the left y-axis and relative permeability on the right y-axis. Time in milliseconds is on the x-axis. Curves labeled for Na⁺ and K⁺.
    Figure 18 | Relative Changes in Sodium Ion Permeability (pNa) and Potassium Ion Permeability (pK) During an Action Potential | 20 This figure elucidates alterations in sodium and potassium ion permeability across the cell membrane during the progression of an action potential. At rest, the sodium and potassium ion permeabilities (pNa and pK, respectively) are relatively low, maintaining the resting membrane potential. Ion channels, including voltage-gated sodium and potassium channels, are closed. In response to a stimulus, voltage-gated sodium channels open, causing a significant increase in pNa. This influx of sodium ions results in the depolarization phase of the action potential. As the membrane potential reaches the threshold, more voltage-gated sodium channels open, further elevating pNa and initiating the rapid spike in membrane potential. The increase in pNa continues during the rising phase, contributing to the swift rise in membrane potential as sodium ions flow into the cell. At the peak of the action potential, voltage-gated sodium channels begin to be inactivated, leading to a decrease in pNa. Simultaneously, voltage-gated potassium channels open, causing an increase in pK. The efflux of potassium ions results in the repolarization of the membrane potential. The efflux of potassium ions briefly overshoots the resting membrane potential, contributing to hyperpolarization. During this phase, pK remains elevated. Both pNa and pK gradually return to their resting state levels as ion channels close, restoring the cell to its initial membrane potential.

    The changes in permeability are instrumental in shaping the action potential waveform and its duration. The rapid increase and subsequent decrease in sodium permeability underlie the rapid depolarization and the falling phase of the action potential. The delayed but sustained increase in potassium permeability is pivotal in the repolarization phase and the return of the membrane potential to its resting value.21

    Systemic electrolyte shifts significantly alter neuronal excitability during surgery by shifting resting membrane potentials and threshold potentials. Hyperkalemia increases resting membrane potential (making it less negative) and brings it closer to threshold; while this initially increases excitability, sustained depolarization causes steady-state inactivation of voltage-gated sodium ion channels. Conversely, hypokalemia hyperpolarizes the membrane (making the resting membrane potential more negative) and moves it further from threshold. 

    Propagation of an Action Potential

    Typically, the origination of an action potential occurs within a specific section of the axon hillock, termed the trigger zone or initial segment. This locale harbors an elevated concentration of voltage-gated sodium ion channels, facilitating the swift execution of depolarization. As the action potential journeys along the length of the axon, it propagates due to the sequential activation of additional voltage-gated sodium ion channels. This propagation stems from the influx of sodium ions through these channels, traversing the intracellular milieu of the cell membrane.

    As sodium ions traverse a short stretch of the cell membrane, their positive charge induces a slight augmentation in membrane depolarization. This incremental depolarization engenders the initiation of new voltage-gated sodium ion channels as the impulse spreads. Consequently, a fresh influx of ions ensues, perpetuating the dissemination of depolarization (Figure 18). The peak of depolarization results in the inactivation of voltage-gated sodium ion channels, which imposes a refractory period during which these channels remain unresponsive. Consequently, any retrograde spread of depolarization towards previously active channels remains ineffectual. Therefore, the action potential propagation mandates one-way progression toward the axon terminals. This directed propagation contributes to the effective transmission of signals along the length of the neuron.

    Illustration of a neuron with a myelin sheath shown in yellow, alongside an arrow and a diagram explaining myelins role. Text boxes highlight spaces and functions in blue, green, and red.
    Figure 19 | Propagation Along an Unmyelinated Axon | 22 Depolarization in response to a stimulus reaches the axon hillock, where an action potential is generated, which travels along the axon in a wave-like fashion. As sodium channels open sequentially, a self-propagating depolarization occurs, ensuring the transmission of the signal toward the axon terminals. After sodium ion (Na+) influx, potassium channels open, allowing efflux of potassium ions (K+), repolarizing the membrane, and restoring the negative charge inside the neuron. Since the membrane enters a refractory period, during which it is temporarily resistant to generating another action potential, it only moves in one direction, which is towards the axon.
    Flowchart showing six green rectangles labeled Information and three blue triangles labeled Points of Review along an arrow path from left to right. Circles with letters are scattered in the path.
    Figure 20 | Propagation (Conduction) of an Action Potential in a Myelinated Axon. | 23 This figure depicts the flow of sodium (Na+) and potassium (K+) ions during action potential conduction in a myelinated axon. At the nodes of Ranvier, voltage-gated sodium channels open, allowing Na⁺ influx, which depolarizes the membrane. The action potential then jumps to the next node in a process known as saltatory conduction. Following depolarization, voltage-gated potassium channels open, leading to K⁺ efflux and repolarization of the membrane. The myelin sheath insulates the axon, speeding up conduction by restricting ion exchange to the nodes.

    The concept of propagation, as delineated earlier, holds true for unmyelinated axons (Figure 19). However, the action potential propagation in a myelinated axon takes on a distinct character (Figure 20). The myelinated stretch lacks the presence of voltage-gated sodium ion channels. However, the distribution of sodium ions from their higher to lower concentrations initiates depolarization in the adjacent area. The absence of a continuous channel arrangement along the axon segment ensures that the depolarization propagates optimally.24

    The spacing between nodes of Ranvier must be precise for saltatory conduction to work effectively. If nodes are too far apart, the positive charge loses too much strength before reaching the next node. The depolarization decays below threshold, failing to open the voltage-gated sodium ion channels at the next node of Ranvier, stopping the signal completely (conduction block). On the other hand, if the distance between the nodes is too short, the signal has to regenerate at too many individual nodes along the axon. Opening channels at every node takes time, which slows down propagation speed and wastes cellular energy.


    This page titled 2.3.6: Action Potential was last modified on Mon, 24 Aug 2026 02:56:42 GMT and is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by Chaya Gopalan (Consortium of Academic and Research Libraries in Illinois (CARLI)) .