Opening the book…
This chapter explores how to control where light falls on a subject and the lighting accessories that can help. Along with the functions, quality, and direction of light, contrast ratios, high-key and low-key lighting, and light metering are also outlined. For reducing light, we explore the exposure triangle and how to control light using your camera via apertures, ISO, shutter speeds, shutter angles, and lens filters. Lastly, there is an overview of accessories that control where the light is falling onto a subject, such as barn doors, snoots, black wrap, dingles, cookies, gobos, and the use of gels. Knowing how to use these tools allows you to control the mood and style of a shot.
Begin with these foundational definitions of how we talk about light:
- Source of light: the origin of the light, for example, the sun.
- Angle of light: the path the beam of light is following.
- Intensity of light: the amount of light emanating from the light source, or in other words the brightness.
Functions of Light
- Creates mood, texture, and style.
- Creates on-screen and off-screen space.
- Creates time.
- Enhances atmosphere.
- Conceals or highlights details.
- Creates meaning.
- Develops character/plot/themes.
Light Contrast Ratio
The difference in intensity between the key light and fill light (the light and shadow) on a subject gives us the contrast. Rather than absolute levels, ratios describe how much brighter or darker one element of the image is to another and are written as two numbers, such as 2:1. Common ratios are 2:1, 4:1, and 8:1, giving a difference of approximately 2, 3, and 4 stops of light, respectively. The key light follows the lens setting. Hence, if the light meter reads f/2.8 on the brightest side of the subject, then the lens will be set on the same f/stop.
Focus!
Key light is the brightest light source that illuminates a subject. This can be the Sun or any other type of light source.
Fill light fills in the main shadows created by the key light on a subject.
The higher the ratio, the higher the contrast. An evenly-lit subject without much shadow has a 1:1 ratio.
Used in comedy, a ratio of 2:1 is high-key lighting. This means the key light is double the intensity of the fill light. It gives depth and dimension to a subject due to a moderate contrast between highlights and shadows and works well for a romantic, gentle feel for soft, delicate subjects such as children and babies. A ratio of 4:1 means the key light is four times the intensity of the fill light.
Bold, striking images are created when using an extremely high contrast ratio of 8:1. This time the key light is 8 times more intense than the fill and is typically used in Film Noir (see Chapter 9, Film Noir and Production Case Study). This ratio creates dramatic dark shadows and bright whites, producing a moody and atmospheric feel.
Measuring Ratios
To measure light ratios, you should determine the amount of light falling onto the subject from each light source. Using a light meter (see light meter as discussed above) is the most accurate method.
- Take a reading of the key light.
- Take a reading of the fill light.
- Compare them.
If a key light reads f/8 and the fill is f/4, the ratio is 2:1.
You can also look at the histogram on the camera. A histogram is a graph showing different exposure levels, hence a general idea of the distribution of light and dark. However, it does not give you an exact measurement of lighting ratios, and when using an 8:1 ratio, it tells one very little except that it is very dark and very light. See Section J PowerPoints, Chapter 6 Histogram for more information on histograms.
Whatever the ratios in a shot, the director of photography will aim to keep them for that scene. This is especially important when filming exteriors and at the mercy of the sun that is constantly moving. The sun is the strongest source of light that we can use. However, as it moves across the sky, the angle of its beams of light is always different. In the case of reshoots, knowing the ratios is helpful for matching shots that are sometimes completed weeks apart.
Quality of Light
Focus!
Inverse square law: When you double the distance between a light source and a subject, you lose 75% of the brightness.
Hard Light
It is important to determine what type of mood you are going for. Hard and soft light have qualities that help create mood as well as character.
Hard light casts distinct, strong shadows and can be very harsh and often unflattering, as it emphasizes skin imperfections and facial features. It is typically coming from a light source close to the subject in the frame, providing a stark contrast from dark to light tones. It can be incredibly beautiful too, for example, when using the Film Noir lighting technique. (See Chapter 9, Film Noir and Production Case Study.)
The shot above used one light, shone directly from above and slightly to the side of the main character. A reflector from the side, but not too close to the subject, bounced light onto the face. Great care was taken to avoid bouncing light in the eyes. You can see how the character’s face looks craggy with dark eyes, giving the impression that the character is mysterious and not a pure soul.
Close up
Hard light, like the sun on a clear day, streetlights, or car headlights:
- Dark shadows, sharp edges.
- Distinct highlights—harsh.
- Direct—emphasizes texture.
- Spotted—small area, intense.
Soft Light
Soft lighting does not necessarily have to be darkly-lit like the shot above. It can be bright and lively and can work well for comedy or romantic genres. Soft light has an even spread of light and a gradual transition from light to dark and blended edges. This quality is more flattering to the subject, softening out skin blemishes and minimizing wrinkles. With the right diffusion and skin-colored gel, an older person can be made to appear much more youthful. The larger the light, the softer the light.
Direction of Light
The direction of light can come from the front, side, and back. Each of these main directions can also be from above, below, or at degree increments; for example, side lighting can be at a 45-degree angle falling onto a subject. The different paths that illumination takes have an enormous impact on an image, creating shadows, texture, depth, style, mood, genre, and how an audience reacts and finds meaning.
Front Lighting
Light directly onto the subject tends to flatten out your subject, so care must be taken to ensure there is texture and/or depth to the image. Figure 6.7 has been lit from the front, but due to the texture on the ground, the position of the legs and hands, and the central sparkling gem, this is most definitely not a flat image. Instead, it is full of information.
Side Lighting
Lighting that falls from the side lends more definition to the subject and enhances or disguises details by creating highlights and shadows. Consequently, the shot will have a three-dimensional quality. Look at figure 6.8 below that has been shot with natural sunlight and one reflector.
Back Lighting
Back lighting is used to separate the subject from the background. However, used on its own, without front or side lighting, back lighting can be extremely effective for creating silhouettes. This is discussed in more detail under Chapter 12, Three-Point Lighting and Four-Point Lighting.
High-key Lighting, Interior
This style is bright, with very little shadow or dark black. With low contrast ratios (such as 2:1), it is used to connote positivity, hopefulness, and optimism. It is often used in TV sitcoms, music videos, and for comedy or romantic comedy film genres. The shot below is from a short comedy.
High-key Lighting, Exterior
The shot below is just using sunlight streaming down onto the subject. It is bouncing off his white shirt, helping to illuminate his head, and showing the texture of his hair. The wooden stairs and handrails add texture and depth to the image.
Low-key Lighting
Low-key lighting tends to use a hard source of light to create shadows with high contrast ratios, creating striking images. This can form an unsettling and dramatic mood. Once again, it is used in film noir (you can see more on this in Chapter 9, Film Noir and Production Case Study), but it is also used for horror, thrillers, or dark-themed dramas.
Sunlight
A cloudy day creates soft, scattered, even light flattering subjects. However, when clouds are intermittent or non-existent, the sun is an extremely strong source of light, especially when it is high in the sky. It creates harsh shadows and can be very unflattering. As it moves across the sky, its beams of light are always at different angles, and the color temperature can vary.
However, you can use the different angles and colors to profound effect, but you must plan for it and be aware you are at its mercy. The “golden hour”—also known as “the hour”—is when the sun has the most beautiful, soft, flattering light. It occurs when the sun is beginning to rise or about to set.
The sun as a light source is covered in more detail in Chapter 7, Exterior Lighting—Day and Night.
Action!
For figures 6.6-6.16 consider the following questions:
- What compositional rule is this shot following?
- Which direction is the light coming from?
- Is there more than one light source in the image?
- Would you say this is high-key or low-key lighting?
- Is the light warm or cool?
- What is the mood?
Accessories that Reduce Intensity of Light
Heavy-duty diffusion, such as silks, nets, and scrims, is discussed in more detail in Chapter 7, Exterior Lighting, Day and Night. The use of flags for negative fill and blocking light, as well as the use of reflectors, are also discussed in that chapter. However, laid out here are some of the terms you will find in Chapter 7 that relate to these accessories.
Close up
Flag—any device that blocks light. You can use black wrap as above, but, for light-blocking, specially designed flags and flag kits are available. Usually made of duvetyne, flags are heat-resistant and secured on a C-stand.
Floppy—a type of flag. A large, black, square tapestry made of duvetyne that is used for blocking out a light source. A floppy can be used to cut the light off of a certain subject or to black out an area for the director’s monitor.
Sider—a device that cuts the light from the side of a lighting unit, usually a flag. Sometimes called an ear.
Dots—small nets and flags used to control light.
Fingers—narrow, rectangular in shape and sometimes called a blade or a cutter.
Toppers and Siders—flags that are placed at the top or side of a light source to reduce the light spill from that position.
Bottomer or Bottom Chops—A flag or cutter that is used to keep light off the floor or the lower part of a scene.
Reflectors—anything reflecting the light from the Sun or other light sources.
Bounce—a white, gold, or silver reflective object used to reflect softer light onto your scene.
Exposure Triangle
All cameras have three in-built elements to control light: the aperture, the ISO, and shutter speed/shutter angle. These three elements are called the exposure triangle and control how much light falls upon the camera’s sensor. We shall look at each of these in detail before moving on to advanced ways to control light.
International Organization for Standardization (ISO)
Measured as a numerical value, the International Organization for Standardization (ISO) controls the sensor’s sensitivity. ISOs of 50, 100, 200, 400, 600, 800, and above 800 are all commonly-used numerical values. Each increment doubles the light sensitivity. For example, an ISO of 400 is double the sensitivity of 200. The larger the number, the higher the sensitivity of the sensor and, hence, the brighter the image, but also the grainier the image. If it is a very sunny day, the ISO might have to be pulled down to 200 or 100. You should know what your camera’s sweet spot, aka native ISO, is. This would be found in the camera specifications in the manual or online from the manufacturer’s website.
See figure 6.18 below showing how light is affected by the ISO.
Understanding the ramifications of using ISOs that push a particular sensor’s sensitivity to its limit is important. For example, the Canon Rebel series has a sweet spot of 400 ISO. If you push the ISO up to 800, the image becomes noisy with graininess to the point of looking “nasty.” The RED Scarlett Dragon has an 800 sweet spot and can cope with pushing for more light above that. However, I have never needed to push an ISO above 800 since I adjust the lights or move the subject to a window with natural light and add reflectors instead. The URSA mini also has a native of 800, but I prefer to use 400, as I find that details in dark shadows are better. However, some cinematographers have other ideas and aesthetics regarding grainy images, and that is their prerogative. Canon’s Rebel series (SLI T6i, etc.) can produce some lovely shots when correctly exposed and composed, as you can see from a sophomore student’s video, God Made a Farmer.[1]
Action
Watch the student video, God Made a Farmer: www.youtube.com/watch?v=2w4xbijCRnc
Aperture
The aperture is the opening in a lens that allows light to enter the lens and reach the camera sensor. Think of the aperture a bit like the pupil in our eyes, except our eyes are so much better than any camera lens. The larger the hole (aperture), the more light enters the sensor. The smaller the hole (aperture), the less light enters the sensor. The mechanism for controlling this aperture is called f/stops or T-stops, shown as f/. The sizes of the holes range from “wide open” at 0.8 to “closed down” at 32. Thus f/stops become marked as f/0.8, f/1.4, f/2, f/2.4, f/3.4, f/4, f/5, f/8, f/11, f/16, f/22, and f/32.
The hard part is remembering the numbers and what they equate with regarding how “wide open” or “closed down” the aperture becomes. The higher the number, the smaller the hole, while the smaller the number, the bigger the hole! Confusing, is it not? I have a mnemonic, BILL and SAM, to help me. The bigger the number, the less light. The smaller the number, the more light. So, if I have an f/stop of 2, this is wide open, allowing lots of light to enter the lens and onto the camera sensor. An f/16 is a narrow opening, and so less light can get onto the sensor. Look at the graph below, which provides some examples of f/stop sizes.
Using your aperture to get more light onto the sensor of the camera is called “opening up”, whilst reducing the light onto the sensor is called “closing down”. You can go up in one-stop increments using this graphic. At the end of this chapter is an exercise to practice your skill in controlling exposure. There are also interactive dialog cards to help with memorization.
Shutter Speed
The shutter speed is like a curtain that comes down in front of the sensor, either cutting out or letting light onto the sensor. The shutter speed is measured in thousands of a second: for example, 1/48th of a thousand of a second. The higher the denominator, such as 1/125, the faster the shutter speed and less light falls onto the sensor with the effect of darkening the image. The lower the denominator, such as 1/15, the slower the shutter speed and more light falls onto the sensor and the image appears lighter.
However, shutter speed affects motion inside the filmic frame. The slower the shutter speed, the blurrier the image is. The faster the shutter speed, the choppier the movement of the image.
Figure 6.20 is a shutter speed cheat sheet.
The normal shutter speed is related to the frame rate. An easy way to remember it is to think about whatever the frame rate is, then double it, put a 1 over it, and add -th. So, 24 fps has a normal shutter speed of 1/48th. If there are 30 fps, then its normal shutter speed would be 1/60th. Similarly, if you have a shutter speed of 1/48th, then your normal frame rate would be half the denominator and remove the 1: in other words, 24 fps. Another example is if you have 1/60th, then the frame rate is 30.
Shutter Angle
Some cameras can be set to shutter angles or only use shutter angles, rather than shutter speeds (e.g., RED). The shutter angle is also relative to the frame rate. Think of the shutter as a circular disc, and certain angles allow the light to fall onto the sensor. Or imagine a full circular pizza without any slices. This is 360 degrees. When you cut slices out, you can have slices of 45, 90, 180, and 270 degrees. The larger the angle, the slower the shutter speed, and motion seems blurry. At the other extreme, the shutter speed can be made arbitrarily fast by decreasing the angle. A moving subject seems sharper, crisper, but also seems to stutter. This knowledge can be used creatively in movie making. In Saving Private Ryan, shutter angles of 45 and 90 were used to make images seem fast:
…Janusz came up with the idea of shooting with the shutter open to 45 degrees or 90 degrees, which completely negated any blurring. Often, when you see an explosion with a 180-degree shutter it can be a thing of beauty, but a 45-degree shutter looks very frightening.[2]
You can see in figure 6.21 how a 45-degree shutter angle blocks out a lot of light, whereas the 270-degree angle lets in a lot of light. For a frame rate of 24 fps, you would use the shutter angle of 180 degrees.
Close up
Here is a little cheat sheet for how shutter angle pertains to shutter speeds. You can see 180 degrees is the normal shutter angle for 24 fps.
| Shutter Angle | Shutter Speed |
|---|---|
| 270 | 1/32 |
| 180 | 1/48 |
| 178.8 | 1/50 |
| 144 | 1/60 |
| 90 | 1/96 |
| 72 | 1/120 |
| 45 | 1/198 |
| 22.5 | 1/348 |
| 11 | 1/696 |
| 8.6 | 1/1000 |
If you want to do the math, then the formula for a shutter angle is:
frame per second x 360 degrees divided by shutter speed in thousands of a second
e.g., 24 fps x 360 degrees / shutter speed = 8640 / 48 = 180
Filters
When you are filming outdoors, or filming with outdoor light streaming through a window, it is difficult to obtain the correct exposure. This is where neutral density filters (ND) come in. They come in a variety of thread sizes and how much light can be blocked out, but they do not change the color of the light itself. Think of it like putting on a pair of sunglasses, except the filters are threaded onto the front of a lens, or using a matte box put in front of the lens.
There is a plethora of brands, but I use Tiffen filters, and, although these are more expensive, the quality of the glass is in line with the expensive prime lenses that are used in digital filmmaking. This is particularly useful if you must maintain a wide aperture for depth in shallow field shots. Below is a chart showing how many f/stops the ND filter can block.
Neutral density graduated filters (ND grads) do the same thing, but instead of the whole filter being the same density, it is gradually decreasing. This means you can expose for the darker area in the shot whilst the brightest part has ND blocking out some light. See figure 6.24 below. Notice how the grassy foreground has barely changed, but the sky is.
There are a variety of ND graduated filters. Sunset grads give a yellow and orange tint, making it appear akin to a sunrise or sunset within the frame, without changes to other parts of the scene. A sunset grad can also enhance a colorless or hazy sky and can also be combined with other filters.
Twilight grads, meanwhile, add a deep magenta to pink gradient to skies and other bright areas of the frame.
Black pro mist creates a soft quality to the light. It reduces highlights and lowers contrast. For characters, it can soften blemishes and wrinkles.
Light Meter
Although camera monitors today have zebras, false color, and histograms for helping with exposure, a light meter has the precision and tactility of measuring the quantity of light falling on or off of a subject. Plus, it looks cool when someone is using it.
Meters can be analog or digital. I have an old analog in my drawer that still works after many years. Analog meters use a needle and are cheaper, but are not always accurate.
Digital meters use an LCD screen and are perfectly accurate but can be pricey. There are even digital apps to download that transform your phone into a light meter. These are good but not as accurate as the digital LCD ones.
Why is a light meter needed?
- Detailed understanding of the light in a shot.
- Accurately assess correct exposure, particularly when filming exteriors.
- Accurately assess exposure when using filters.
- Ensure green or blue screens are correctly-lit (please refer to Chapter 15, Green Screen).
- Assist you when dealing with challenging conditions such as low lighting.
- Helps determine contrast ratios.
- Helps with continuity/consistency throughout shots in a scene, especially for moving shots.
- Eliminates vague terms such as darker, lighter.
- Cinematographers and DOPs can communicate specifics with gaffers and grips, e.g., hit a certain value and be fast and effective.
- Helps with planning and developing light plots.
- Gaffers and grips able to rig a scene before the arrival of the camera.
- Location scouts can check existing levels of ambient light in a particular place, which helps the DOP and cinematographer to understand how to best light the location. Saves time.
- For performing camera tests and wishing to assess the dynamic range of a camera.
There are plenty of electronic light meters in the market and many more apps you can download to use on your cell phone. However, they all have the same purpose: to measure the amount of continuous light that either falls onto a subject, incident light, or reflects/bounces off of a subject (reflective light). Reflective light meters, also called spot meters, are typically used for taking readings off of small areas.
The meter in figure 6.28 (Sekonic brand) is the kind I use in class. For this meter, dial in the ISO and shutter speed and change the mode based on needs, such as if you are using flash photography. Once information is dialed in, the meter can be used to take readings.
The round white globe is called the lumisphere, which measures the light; its shape enables readings to be taken at 180 degree angles. When the light meter is held up to the subject with the lumisphere facing the camera, it will record incident light. Be sure to not block any light with your body. Hold it close to the subject’s face, and press down on the side button. The meter will give you the correct f/stop to use for the ISO and shutter speeds that you have set on the camera. When the meter has the lumisphere facing the subject instead, it will record reflective light. This measurement is often used when filming water shots and other highly reflective subjects.
Accessories that Control Where Light Falls
The accessories below do not soften a light source. Rather, they are used to control light that is falling onto your subject or block light that is spilling from another light source.
Barn Doors
Barn doors are movable, metal flaps that attach to the front accessory holders of light fixtures. By controlling the direction of light, they can help create dramatic effects, shape light beams, and reduce unwanted light spill. You can bend each flap at an angle, open or closed, in various degrees to achieve the desired effect.
It should be remembered that they only control where the light is specifically falling onto a subject; they do not diffuse light. Items such as diffusers and gels can be fastened onto the barn doors using C-47s (clothespins).
Black Wrap/Cinefoil/Photofoil
Using black wrap is a quick, inexpensive way to control light. It is made from black aluminum foil, with a matte coating on each side, and is used to block out light, control light spill, and eliminate unwanted reflections. It can even conceal items that are in shot but must be hidden, like imperfections on a piece of scenery. It is particularly useful in conditions of extreme heat and hence replaces other accessories that might burn.
Lightweight and durable, it is heat-resistant and can keep its shape and position when wrapped around fixtures or hardware. It can be positioned in place with tape, staples, or adhesives. However, only C-47s should be used to affix black wrap to a light fixture.
Black wrap comes in rolls with different widths and lengths to accommodate your needs. With scissors, you can cut it into different patterns to create custom gobos, snoots, cookies, or flags and barn doors, and you can even reuse it.
Accessories that Create Patterns of Light
Using tools that can create patterns is useful. You can find dingles for free in the garden or purchase expensive cookies, but they all serve the same purpose: to give your scene some extra life and make it appear more realistic. As discussed above, cine foil can have patterns cut out and placed in front of a light source. However, below are some other accessories that you can use.
Dingle
I use dingles all the time. This is anything you may have found lying in your garden, particularly a tree branch, with or without leaves, that is placed in front of the light (not too close in case of fire). Someone can gently move it or vigorously shake it according to the mood of the scene (e.g., a gentle breeze or major storm). A dingle is the simplest and cheapest accessory that you can use.
Cucoloris or “Cookie”
More commonly called a cookie, this is an accessory that has a large pattern, usually carved out of wood. It is placed at a distance from a light source, and that can create similar patterns and shadows. It does need some grip rigging, such as a C-stand, knuckle, arm, and sandbags, to ensure it is placed securely. The large cookie in figure 6.33 is part of a kit that contains flags, dots, and bounce cards.
Cookies cut light into patterns formed by the cookie’s design. It can help create contrast as well as prevent the light from looking too fake. I love using these and have a portable wooden trellis from a hardware store that serves as a great cookie.
Gobo
There has been speculation about the origins of the term “gobo.” Some have theorized that the term is a contraction of “go before optics” or “go between optics.”[3] Made of metal, it has specific stenciled patterns that can project shapes, shadows, textures, and images when placed inside a focusable fixture like a Fresnel.
It is often used on set to project shadows, giving the impression of a set of window blinds, custom logos, or the outline of foliage. They create visual interest and depth to your shot. Gobos have a special holder that they are hooked into, and this is put onto the accessory plates on the light fixture.
This circular metal ring has small hinges that open up, creating two circles. You place the gobo in-between the circles and close it shut, securing it with the hinges.
Snoot
A snoot is also called a top hat and is made of PVC. Attached to the end of the light, it modifies the beam into a focused spotlight. It is commonly cylindrical or circular in shape and can come in different lengths and diameters. It is great for highlighting detail or adding a dramatic look. Some snoots come with a honeycomb modifier grid that can reduce some of the intensity of the light.
Gels
The use of colors to change the light beams was used as far back as Shakespeare’s time. Red wine in a glass container gave way to the use of dyed gelatin material. Today, gels are made from thin, heat-resistant plastic and come in a wide range of colors and manufacturers. They are used to create an overall color aesthetic, diffusion, and color correction. They are denoted by name and sometimes a number designation from brands like Rosco. They can be bought in rolls or square sheets and cut to fit your lamp fixtures.
Gels can be split into four primary areas of use:
- color gels (for style, mood, and atmosphere)
- correction gels for mixed lighting
- correction gels for skin tone
- neutral density gels (to reduce intensity of light sources)
Colored Gels
With dozens of different colored gels available, you can choose orange gels that create warmth and sunshine or blue gels that create bitter winter or moonlight. Visual storytelling can be enhanced with the simple use of these gels. Make sure your camera kelvins are set to the correct indoor (or outdoor) values of your key light to get the best results.
Gels can come in a variety of strengths, including full, half (½), and quarter (¼) gels. Most gel manufacturers have a swatch that shows all the gel colors (and diffusers) they have.
Color Correction—Mixed Color Temperature
In shots that have mixed color temperatures, such as if you are shooting interiors that have daylight flooding through a window, then a color temperature blue gel (CTB) can be attached onto the interior light fixture(s). This CTB brings up the tungsten light fixtures to match the outdoor light temperature. This is quick and easy to do.
The more convoluted way is to bring the outdoor temperature down to the interior lighting fixture by using a Color Temperature Orange (CTO). This involves covering the whole window with the CTO. If the window is supposed to be in the shot, care must be taken to ensure the gel is noticeable.
Of course, you can use mixed color temperatures for effect. Take a look at this car shot in figure 6.39 below. Can you see how the mixed lighting has been deliberately used to create a dark, cold exterior versus the warmth inside the car?
Color Correction—Skin Tones
Sometimes actors’ skin tones may appear too pale on camera. Using some gels, such as “Bastard Amber,” can give a really flattering effect to skin tones and diminish blemishes and wrinkles.
A magenta gel, also called a “minus green,” can be used to cut out green tinges from light fixtures that cast ugly green hues onto subjects, particularly when skin tones look ghastly. I like the magenta on certain brownish colors, as it gives a richer tone.
Look at the difference between the shots in figure 6.40 and 6.41. The color temperature has changed the mood and the character completely.
Neutral Density Gels
These ND gels act in the same way neutral density filters work on the camera lens, except these ND gels are attached to the light fixture with C-47s. They reduce the intensity of the light source without any change in the color temperature. They come in values of full, half, and quarter strengths and are especially useful if you must balance different light fixtures or want to reduce a particularly bright source, such as the sun.
They are especially useful if you attach them to a window, as they allow for the correct exposure inside the room without the dreadful overexposure that occurs from daylight.
See the image below, and notice how there is no ND on the window, so it looks blown-out. Yes, the crew was still setting some lights at the time, but they did not fix this overexposure on the window. Some filmmakers insist on not using ND and feel it is an aesthetic choice. For me, I think the extra five or ten minutes spent on affixing the gel would be worth it to provide a more attractive shot. There are better ways to make a window look blown-out but aesthetically-pleasing, such as using silk over a window.
You should spend time practicing your skills using all these different tools to control your light. Start with honing your camera exposure skills and then work on the simpler accessories on your lights.
Practice using your light meter. Set up a shot and play with the colored and neutral density gels.
Move on to experiment with dingles you have found in the yard. Try out some cookies, snoots, and gobos. If you do not have these, use some black wrap to fashion patterns. I have even used a tennis racket in front of a light to create a lovely texture on the back wall. Just make sure you do not have flammable items too close to the lamps.
With so many tools at your disposal, you will soon be able to manipulate light and shadow to create stunning, memorable images, taking your visual storytelling to a new level.
Chapter Review
Dialog Cards
Quiz: f/stops
Look again at the aperture graph in figure 6.19 above. I am using an f/stop of 5.6:
- I wish to open up for more light. Which f/stops can I use?
- I wish to close down for less light. Which f/stops can I use?
- I am using an f/2 and wish to open up by ONE STOP. Which f/stop do I use?
- I am using an f/22 and wish to open up by ONE STOP. Which f/stop do I use?
- I am using an f/8 and wish to open up by TWO STOPS. Which f/stop do I use?
- I am using an f/8 and wish to close down by TWO STOPS. Which f/stop do I use?
Crossword
Review
Media Attributions
- Using Sunlight © Ros Smith
- High Contrast © Ros Smith
- Histogram © Emil Oberg is licensed under a CC0 (Creative Commons Zero) license
- Cold Soldiers Hard Light © Nick Smith
- Soft Light Among the Hemlocks © Ros Smith
- Direction of Light on Uniform © Ros Smith
- High Key Front Lighting Ring © Ros Smith
- Exterior Close-Up, Side Lighting © Ros Smith
- Cold Soldiers Backlighting © Nick Smith
- High Key Lighting Interior © Sam Mackintosh-Smith
- High Key Lighting Exterior © Ros Smith
- Low Key Lighting Boots © Ros Smith
- Low Key Lighting Drama © Ros Smith
- Cold Soldiers Exterior Sun Direction © Robbin Knight
- Almost Still Life © Ros Smith
- 8:1 Ratio Lighting © Ros Smith
- ISO Graphic is licensed under a Public Domain license
- Aperture/f/stops Graph is licensed under a Public Domain license
- Shutter Speed Graphic is licensed under a Public Domain license
- Shutter Angle Graphic is licensed under a Public Domain license
- 7 ND filter example © Diego Delso is licensed under a CC BY-SA (Attribution ShareAlike) license
- ND filters in use
- ND Filters in Use © Carl Jones is licensed under a CC BY-NC (Attribution NonCommercial) license
- Analog Meter © Ros Smith
- Digital Meter Cheaper Range © Ros Smith
- Small Sekonic Light Meter is licensed under a CC BY-SA (Attribution ShareAlike) license
- Electronic Light Meter MyName (Nono365) is licensed under a CC BY-SA (Attribution ShareAlike) license
- Lumisphere © Ros Smith
- Barn Doors © Ros Smith
- Blackwrap, B-and-H
- Black Wrap After Use © Ros Smith
- Cookie © Ros Smith
- Trellis and Film Noir © Ros Smith
- Gobo Stencil Fire
- Gobo Holder for Fresnel Lamp Fixture © Ros Smith
- Snoot © Ros Smith
- Gels Swatch © Ros Smith
- Mixed Car Lighting Interior and Exterior © Ros Smith
- Orange Gel © Ros Smith
- Quarter Blue Gel © Ros Smith
- No ND on Window © Nick Smith
- Studio Interior Night Temperance Women © Ros Smith
- Aldinger, Carl. God Made a Farmer. COMM 254 Video Field Class, 2021. www.youtube.com/watch?v=2w4xbijCRnc 1.06: Controlling Light and Lighting Accessories#return-footnote-790-1
- Ressner, Jeffrey. “War Is Hell - Saving Private Ryan.” Fall 2011. Directors Guild of America. Accessed 20 Oct. 2024. www.dga.org/craft/dgaq/issues/1103-fall-2011/shot-to-remember-saving-private-ryan 1.06: Controlling Light and Lighting Accessories#return-footnote-790-2
- Cadena, Richard. Automated Lighting. The Art and Science of Moving Light in Theatre, Live Performance and Entertainment. 2nd edition. Taylor and Francis, 2010. p254 1.06: Controlling Light and Lighting Accessories#return-footnote-790-3
This page titled Chapter 6: Controlling Light and Lighting Accessories was last modified on Mon, 26 Oct 2026 17:17:03 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Roslin Smith via source content that was edited to the style and standards of the LibreTexts platform.
The book could not be loaded just now.