6.13: Humbucker Coils in Microphones

Understanding Sound From Ear to Engineer · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY-SA 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    6.13: Humbucker Coils in Microphones

    Humbucker Coils in Microphones

    Some microphones use humbucker coils to reduce electromagnetic hum. The design works by using two coils wound in opposite directions, which cancels out noise from electrical interference, similar to humbucker pickups used in electric guitars.

    The humbucker coil is specifically designed to reduce or eliminate the 50–60 Hz cycle hum caused by alternating current (AC) power systems. This type of interference can easily be picked up by microphone wiring and coils, especially in environments with lots of electrical equipment.

    Humbucker coils are most commonly found in dynamic microphones, where their ability to suppress AC hum is particularly valuable in live sound and studio environments.


    This page titled 6.13: Humbucker Coils in Microphones was last modified on Fri, 01 May 2026 02:55:06 GMT and is shared under a CC BY-SA 4.0 license and was authored, remixed, and/or curated by Geoffrey Dunbar.