Opening the book…
Radiative contributions differ fundamentally by engine category:
- SI Engines: Radiation originates from non-luminous gaseous products (\({\mathrm{CO}}_2\), \({\mathrm{H}}_2\mathrm{O}\)) and represents \(<5\%\) of peak convective heat flux (cycle-integrated gas radiation is negligible).
- CI (Diesel) Engines: Highly luminous turbulent diffusion flames generate incandescent soot particles. Radiant flux accounts for 20–35% of total heat transfer.
Gas emissivity depends on component partial pressures \(p_i\), path length \(l\), and gas temperature \(T_g\):
\[ε_g=f\left(T_g,p_1l,\dots ,p_nl\right) \nonumber \]
The mean beam path length \(l\) for volume \(V\) and surface area \(A\) is:
\[l=0.9\left(\dfrac{4V}{A}\right) \nonumber \]
Peak gas emissivity reach \(ε_g\approx 0.1\) with peak radiative heat fluxes of \(\sim 0.2{~\mathrm{MW/m}}^2\). Because gas radiation scales with \(T^4_g\), it decays rapidly during expansion.
For flame radiation, soot particle radiation exhibits continuous spectral emission. Monochromatic emissivity \(ε_{λ}\) follows the empirical dispersion relation:
\[ε_λ=1-{\mathrm{exp} \left(-\dfrac{kl}{λ^{0.95}}\right)} \nonumber \]
Combining \(ε_{λ}\) with Planck’s blackbody law yields the apparent radiation temperature \(T_R\) and apparent grey-body emissivity \(ε_a\):
\[e_{b,λ}=\dfrac{2πK_1}{λ^5\left(e^{K_2/λT_R}-1\right)},\qquad ε_a=\dfrac{\displaystyle \int{ε_λ}e_{b,λ}dλ}{\displaystyle \int{e_{b,λ}}dλ} \nonumber \]
(where \(K_1=0.59548\times {10}^{-16}~\mathrm{W}\cdot {\mathrm{m}}^2\) and \(K_2=1.43879~\mathrm{cm}\cdot \mathrm{K}\)).
For soot monochromatic absorption coefficient, the absorption coefficient \(k_λ\) depends on soot mass concentration \(c_s\) (\({\mathrm{kg/m}}^3\)) and soot density \(ρ_s\approx 2\times {10}^3{~\mathrm{kg/m}}^3\):
\[k_λ=36π\left(\dfrac{c_s}{ρ_s}\right)f\left(λ,T\right) \nonumber \]
Evaluating the emissive-power-weighted average yields the mean absorption coefficient \(k_a\):
\[k_a=\dfrac{\int{k_λ}e_{b,λ}dλ}{\int{e_{b,λ}}dλ} \nonumber \]
For blackbody radiation at \(1800~\mathrm{K}\), \(k_a\approx 1300c_s{~\mathrm{m}}^{-1}\). Annand related flame emissivity to mean absorptivity via \(ε_a=1-{\mathrm{exp} \left(-k_al\right)}\). Peak emissions (\(ε_a=0.8\), \(l\approx 0.07~\mathrm{m}\)) yield \(k_a\approx 22{~\mathrm{m}}^{-1}\) and in-cylinder soot loading \(c_s\approx 16{~\mathrm{g/m}}^3\).
Annand radiant correlation combines convective models with a bulk temperature radiative term:
\[{\dot{q}}_R=βσ\left(\overline{T}^4_g-T^4_w\right) \nonumber \]
Parameter \(β\): \(β\approx 0.6\) (initial estimate) to \(β\approx 1.6\) (modified version). Because \({\overline{T}}_g\) represents mean gas temperature rather than local flame temperature, \(β\) acts as an empirical scaling factor rather than physical emissivity.
Flynn developed an empirical expression fit instantaneous radiant flux profiles using the crank angle at radiation onset (\(θ_s\)):
\[\dot{q}_R=2 \overline{q}_R b \left(a+1\right) {\left(\dfrac{θ-θ_s}{360}\right)}^a{\mathrm{exp} \left[-\dfrac{ {\left(θ-θ_s\right)}^{a+1}}{360}\right]} \nonumber \]
Parameters \({\overline{q}}_R\), \(a\), \(b\), and \(θ_s\) are correlated as functions of engine speed, manifold pressure, equivalence ratio, and injection timing.
This page titled 7.3: Radiative Heat Transfer was last modified on Wed, 18 Nov 2026 07:18:33 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Haifa El-Sadi.
The book could not be loaded just now.