3.0: Introduction

Aircraft Engine: Design and Analysis · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    3.0: Introduction

    Aircraft engines fall into two primary mechanical classifications: Piston (Reciprocating) Engines and Gas Turbine Engines (along with non-air-breathing Rocket Engines). Piston Engines operate on an internal combustion four-stroke cycle (Otto or Diesel) where pistons turn into crankshaft to drive a propeller. Piston engines are extremely efficient at low speeds and low altitudes; limited in total power output and high-altitude performance. Piston engines are used in small general aviation aircraft (e.g., Cessna 172, Piper Cherokee). Gas turbine engines generate thrust using continuous flow thermodynamics (Brayton Cycle): intake, compression, combustion, expansion through a turbine, and exhaust. Gas turbine engine such as a turbojet draws in air, compresses it, burns it with fuel, and expands it through a turbine, discharging all exhaust gases through a nozzle to produce pure reaction thrust—a design that operates efficiently at supersonic speeds (e.g., Concorde, F-104), though it is loud and fuel-inefficient at subsonic cruise. To improve efficiency, the other example of gas turbine engine is turbofan which combines a core gas turbine with a large front fan, splitting incoming air between core combustion and an outer bypass stream; this lower average exhaust velocity provides superior fuel economy and noise reduction at high subsonic cruise speeds (\(Ma\approx 0.7--0.85\)), making it the standard for modern commercial jetliners and military aircraft. For low-to-medium speed regimes (\(Ma<0.6\)) and regional routes. However, the turboprop uses its gas turbine to drive a reduction gearbox and external propeller, offering exceptional fuel economy for aircraft like the ATR 72 and C-130. Operating on a similar mechanical principle, the turboshaft extracts nearly all fluid power through the turbine to drive an external shaft rather than a propeller, delivering high power-to-weight ratios for helicopters, tank propulsion (M1 Abrams), and auxiliary power units.

    Moving beyond mechanical compressors, high-speed non-turbine air-breathing engines leverage forward momentum for axial compression: the ramjet relies on high supersonic flight speeds (\(Ma>3\)) to compress intake air before combustion and nozzle expansion, whereas the scramjet (supersonic combustion ramjet) bypasses thermal choking by maintaining supersonic airflow throughout the combustion chamber for hypersonic operations (\(Ma>5\)).


    This page titled 3.0: Introduction was last modified on Wed, 18 Nov 2026 07:18:35 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Haifa El-Sadi.