4.8: Chapter References

Mechatronics: Fundamentals, Design, Integration, and Validation · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY-NC 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    4.8: Chapter References
    1. R. C. Dorf and R. H. Bishop, Modern Control Systems, 12th ed., Englewood Cliffs, NJ, USA: Prentice Hall, 2011, ISBN-10: 0-13-602458-0.
    2. M. J. M. Pelgrom, Analog-to-Digital Conversion, 4th ed., Helmond, Netherlands: Springer, 2022, ISBN-13: 978-3-0309-0808-9.
    3. T. Waho, Introduction to Analog-to-Digital Converters — Principle and Circuit Implementation, Gistrup, Denmark: River Publishers, 2019, ISBN-13: 978-8-7702-2102-3.
    4. D. F. Hoeschele, Analog-to-Digital and Digital-to-Analog Conversion Techniques, 2nd ed., Hoboken, NJ, USA: John Wiley and Sons, 1994, ISBN-13: 978-0-4715-7147-6.
    5. R. van de Plassche, Integrated Analog-to-Digital and Digital-to-Analog Converters, Helmond, Netherlands: Springer, 1994, ISBN-13: 978-1-4613-6186-2.
    6. J. O. Smith, Mathematics of the Discrete Fourier Transformation (DFT), 2nd ed., Stanford, California, USA: W3K Publishing, 2007, ISBN-13: 978-0-9745-6074-8.
    7. E. Chu, Discrete and Continuous Fourier Transform: Analysis, Application and Fast Algorithm, Boca Raton, FL, USA: CRC Press, 2019, ISBN-13: 978-0-3674-5269-8.
    8. J. F. James, A Student’s Guide to Fourier Transforms with Applications in Physics and Engineering, 3rd ed., Cambridge, MA, USA: Cambridge Univ. Press, 2011, ISBN-13: 978-0-5211-7683-5.
    9. M. E. Van Valkenburg, Analog Filter Design, New York, NY, USA: Oxford Univ. Press, 1982, ISBN-13: 978-0-0305-9246-1.
    10. T. Hinamoto and W. Lu, Digital Filter Design and Realization, Gistrup, Denmark: River Publishers, 2017, ISBN-13: 978-8-7935-1964-0.
    11. U. Meyer-Baese, Digital Signal Processing with Field Programmable Gate Arrays (Signals and Communication Technology), 4th ed., Helmond, Netherlands: Springer, 2014, ISBN-13: 978-3-6424-5308-3.
    12. H. Nyquist, “Certain topics in telegraph transmission theory,” Trans. AIEE, vol. 47, no. 2, pp.617–644, Apr. 1928.
    13. H. Dieter Lüke, “The origins of the sample theorem,” IEEE Commun. Mag., vol. 37, no. 4, pp. 106–108, Apr. 1999.
    14. D. Clarke, Tobias Wrigstad, and James Noble, Aliasing in Object-Oriented Programming: Types, Analysis and Verification (Lecture Notes in Computer Science, 7850), Berlin Heidelburg, Germany: Springer-Verlag, 2013, ISBN-13: 978-3-6423-6945-2.
    15. K. Hausmair, S. Chi, P. Singerl, and C. Vogel, “Aliasing-Free Digital Pulse-Width Modulation for Burst-Mode RF Transmitters,” IEEE Trans. on Circuits Syst. I, Reg. Papers, vol. 60, no. 2, pp. 415-427, Feb. 2013.
    16. S. Faruque, Radio Frequency Modulation Made Easy, 1st ed., Cham, Switzerland: Springer, 2017, ISBN-13: 978-3-3194-1200-9.
    17. S. Hollos and J. Richard Hollos, Passive Butterworth Filter Cookbook, Longmont, CO, USA: Abrazol Publishing, 2021, ISBN-13: 978-1-8871-8742-8.
    18. R. P. Agarwal and Donal O’Regan, Ordinary and Partial Differential Equations, New York, NY, USA: Springer, 2009, ISBN-13: 978-0-3877-9146-3.
    19. IEEE Standard Association, IEEE Standard for Floating-Point Arithmetic (IEEE 754-2019), Accessed: December 29, 2025. [Online] Available: https://standards.ieee.org/ieee/754/6210/.
    20. G. F. Franklin, J. David Powell, and Michael L. Workman, Digital Control of Dynamic Systems, 2nd ed., New York, NY, USA: Addison-Wesley, 1990, ISBN-10: 0-20-151884-8.
    21. C. L. Philips and H. Troy Nagle, Digital Control System, 2nd ed., London, UK: Prentice Hall Int. Ltd., 1990, ISBN-10: 0-13-213596-5.
    22. S. Butterworth, “On the Theory of Filter Amplifiers,” Exp. Wirel. and Wirel. Eng., vol. 7, pp. 536–541, Oct. 1930.
    23. J. G. Proakis and D. G. Manolakis, Introduction to Digital Signal Processing, New York, NY, USA: Macmillan Pub. Co., 1988, ISBN-10: 0-02-396810-9.
    24. F. P. Miller, Agnes F. Vandome, and M. John, Chebyshev Filter, Saarbrücken, Germany: VDM Pub., Oct. 2010, ISBN-13: 978-6-1318-3469-1.
    25. T. D. McGlone, Butterworth and Bessel Filters: A Tutorial Overview, CreateSpace Independent Publishing Platform, May 2016, ISBN-13: 978-1-5331-7280-8.
    26. A. Tustin, “A method of analysing the behaviour of linear systems in terms of time series,” J. of Inst. of Elect. Eng. — Part IIA: Automat. Regulators and Servo Mech., vol. 94, no. 1, pp. 130–142, May 1947, doi: 10.1049/ji-2a.1947.0020.

    Solutions to Practice Problems

    1. The Laplace transform is

      \[\mathcal{L}\left[f(t)\right]=\dfrac{s}{s^2+1}+0.5\dfrac{4}{s^2+16}\]

      \[\mathcal{L}\left[f(t)\right]=\dfrac{s^3+2s^2+6s+1}{s^4+17s^2+16}\]

      Using MATLAB, we can plot the magnitude of the frequency response below.

      1.  
      2. The answer is 256 (c).
      1. The answer is 4.805 volts (b).
      2. The answer is 1 10000010 0010100…0 (c). Because the number is negative, leading to bit 1 equal to 1; the power factor is 2 (\(-4.625=-2^2\times 1.15625\)). Resulting bits 2–9 are 10000010 (binary representation of \(127+2\)). The first 6 binary digits of 0.15625 are 001010. Indicating bits 10–32 are 0010100…0.
      1. The following are the \(z\)-transforms.
      2. \(\dfrac{2Tz}{{\left(z-1\right)}^2}\)
      3. \(\dfrac{4z\left(z-{\mathrm{cos} 2\ }\right)}{z^2-2z{\mathrm{cos} 2\ }+1\ }\)
      4. \(\dfrac{z}{z-1}+\dfrac{2e^{-2T}z{\mathrm{sin} 2\ }\ }{z^2-2e^{-2T}z{\mathrm{cos} 2\ }+e^{-4T}}\)
      1.  

      when \(U\left(z\right)=1\), \(Y\left(z\right)=\dfrac{z}{z-0.5}\ \to aT=0.6931\). Therefore,

      \[y\left(k\right)={\mathcal{Z}}^{-1}\left[Y(z)\right]=e^{-0.6931k}\]

      1.  

      The discrete-time system matrices are shown below using MATLAB command c2d.

      \[A_d=\left[ \begin{array}{cc} 1.0000 & 1.1052 \\ 0.8187 & 0.9512 \end{array} \right],\ \ B_d=\left[ \begin{array}{c} -0.2519 \\ 1.1052 \end{array} \right],\ \ C_d=\left[ \begin{array}{cc} 1 & 0 \end{array} \right]\]

      and the discrete-time \(z\)-transfer function is shown below using MATLAB command ss2tf.

      \[G\left(z\right)=C_d{\left(zI-A_d\right)}^{-1}B_d=\dfrac{-0.2519z+1.4610}{z^2-1.9512z+0.0464}\]

      1. The time domain and frequency domain plots can be prepared using MATLAB. The following figure shows both time and frequency (magnitude) plots for P4.12. Two frequency magnitude peaks near 6.28 and 31.42 rad/s correspond to the time domain signal \({\mathrm{sin} (2πkT_s)\ }\) and \({\mathrm{cos} (10πkT_s)\ }\) with \(T_s=0.005\) second. Note that the continuous-time signals \({\mathrm{sin} (2πt)\ }\) and \({\mathrm{cos} (10πt)\ }\) contain signals at angular frequencies of 6.28 and 31.42 rad/s.
      2. The answer is \(C=1\ μF\).
      3. The answer is \(R=1\ kΩ\).
      4. The answers are \(R_H=100\ kΩ\) and \(R_L=200\ kΩ\).
      1. The answers are \(R_L=100\ kΩ\) and \(R_H=200\ kΩ\).
      1.  
      2. Neither a) nor b) satisfy the Nyquist-Shannon sample condition; however, c) does because \(f_s=120>2f_h=100\) Hz.
      3. Because \(f_s=8>2f_h=4\) Hz, the Nyquist-Shannon sample condition is satisfied. The rotational direction can be identified due to the following captured image.
      1. a) aliasing exists because \(f_s=250\ Hz<800\ Hz\)., and b) there are two aliasing frequencies below sample frequency, and they are at 100 and 150 Hz with \(l=-2\) and \(-1,\) respectively.
      2. The answer is b) 30%.
      1.  
      2.  
      3.  

      with poles located at \(s_{1,2}=-70.71\pm j70.71\) and \(\left|s_{1,2}\right|=100\).

      1.  

      As a result, we have the following conditions.

      \[ω_c=\dfrac{1}{RC},\ \ \ \dfrac{2R_2-R}{R_2}=\sqrt{2}\]

      With \(C=0.1\ μF\) and \(ω_c=100\) rad/s, \(R\) and \(R_2\) can be calculated as follows.

      \[R=\dfrac{1}{ω_cC}=\dfrac{1}{100\times {10}^{-7}}=100\ kΩ,\ \ \ R_2=\dfrac{R}{2-\sqrt{2}}=170.71\ kΩ\]

      1.  

      So, we have

      \[R_1=\dfrac{1}{0.5107\times C}=\dfrac{1}{0.5107\times {10}^{-5}}=195.81\ kΩ\]

      For the second part of the circuit, we have

      \[\dfrac{V_{out}(s)\mathrm{\ }}{V_1(s)\mathrm{\ }}=\dfrac{R+R_2}{R_2}\cdot \dfrac{1}{1+\left(\dfrac{2R_2-R}{R_2}\right)RCs+{\left(RC\right)}^2s^2}\]

      As a result, we have the following conditions.

      \[R=\dfrac{1}{\sqrt{1.0108}\times C},\ \ \ \dfrac{2R_2-R}{R_2}=0.5107\]

      With \(C=10\ μF\), \(R\) and \(R_2\) can be calculated as follows.

      \[R=\dfrac{1}{\sqrt{1.0108}\times C}=\dfrac{1}{1.0054\times {10}^{-5}}=100.27\ kΩ,\ \ \ R_2=\dfrac{R}{2-0.5107}=67.33\ kΩ\]

      The DC gain for the filter is

      \[\dfrac{R+R_2}{R_2}=\dfrac{100.27+67.33}{67.33}=2.489.\]

      1.  
      2.  

    This page titled 4.8: Chapter References was last modified on Sun, 23 Aug 2026 22:22:26 GMT and is shared under a CC BY-NC 4.0 license and was authored, remixed, and/or curated by Guoming Zhu (Co-DREAM OER) .