4.4.2: Chassis Design

Managing Technology Projects · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    4.4.2: Chassis Design

    The chassis design is often done in concert with a lead system designer by mechanical engineers.

    The mechanical engineering team prepares 3D models of the desired enclosure which will be fabricated using sheet metal usually by an outside vendor. The design model contains the necessary metal openings for front-panel I/O interfaces, removable power supplies, and removable fan trays.

    The desired direction of air flow is usually specified by the product manager, based on where the product will be placed in racks. Air-flow direction can include front to back (pull in air from the front panel with the I/O interfaces) or side to side.

    Typically a plastic overlay is placed on the front panel around the I/O module cages, labeling the types of interfaces and numbering them.

    The mechanical design team needs to be keenly aware of EMC considerations and to proactively take countermeasures. During the EMC testing of the first revision of the chassis and board mounted within it, traffic flow testing can reveal electronic immunity issues or emissions issues. This may result in a second revision of the chassis design.

    The chassis design team must also arrange to paint the chassis according to the current prevailing look and feel and industrial design guidelines required by Marketing as reflected in the product manager's requirements.

    Also on the chassis is an emblem indicating the compliance status of the system (e.g., CE mark, FCC rating).

    The team works with the technical publications team to ensure that correct documentation for the system is prepared.


    4.4.2: Chassis Design is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by LibreTexts.