Opening the book…
Learning Objectives
After completing this section, you should be able to:
- Distinguish between intramolecular bonds and electrostatic attractions between particles.
- Identify the major types of electrostatic attractions found in introductory chemistry.
- Predict the dominant electrostatic attraction present in a substance.
- Compare the relative strengths of different electrostatic attractions.
- Explain how electrostatic attractions influence physical properties such as melting point, boiling point, solubility, and viscosity.
5.4.1 From Molecules to Materials
So far in this chapter, we have focused on the structure of individual molecules. We first learned how to determine molecular geometry using VSEPR theory and then used molecular geometry to predict whether a molecule is polar or nonpolar.
But molecules rarely exist in isolation. Instead, they interact with neighboring particles through a variety of attractive forces. These attractions help explain why some substances are gases at room temperature, while others are liquids or solids. They also influence many familiar physical properties, including melting point, boiling point, viscosity, surface tension, and solubility.
All of these attractions arise from the same fundamental principle:
Opposite charges attract, and like charges repel.
The difference between the various types of attractions lies in what kinds of particles are interacting and whether the charges are full charges or partial charges.
Figure \(\PageIndex{1}\): Chemical Bonds and Electrostatic Attractions. Three-panel diagram comparing the types of attractive forces discussed in this chapter. The left panel illustrates an intramolecular covalent bond within a single water molecule, showing oxygen covalently bonded to two hydrogen atoms. The panel explains that covalent bonds hold atoms together within a molecule. The center panel shows two neighboring water molecules connected by a dotted hydrogen bond between the partially negative oxygen atom of one molecule and the partially positive hydrogen atom of the other. The panel explains that intermolecular forces are electrostatic attractions between neighboring molecules. The right panel shows a three-dimensional sodium chloride crystal lattice composed of alternating sodium ions (Na⁺) and chloride ions (Cl⁻). The panel explains that ion-ion attractions are electrostatic attractions between oppositely charged ions that hold ionic compounds together in an ionic crystal lattice. Together, the three panels distinguish between covalent bonds within molecules, intermolecular forces between molecules, and electrostatic attractions between ions in ionic solids.\
Covalent bonds hold atoms together within a molecule and are therefore called intramolecular bonds. Electrostatic attractions occur between neighboring particles. These attractions include intermolecular forces between molecules, ion-ion attractions between oppositely charged ions, and ion-dipole attractions between ions and polar molecules.
Although electrostatic attractions are generally weaker than covalent bonds, they have a profound effect on the physical properties of matter.
5.4.2 Types of Electrostatic Attractions
Electrostatic attractions can be grouped according to the types of particles involved.
1. Attractions Involving Ions
These attractions occur between positively charged cations and negatively charged anions.
Ion-ion attractions
- Occur between cations and anions.
- Hold ionic compounds together in a repeating three-dimensional crystal lattice.
- Generally represent the strongest type of electrostatic attractions.
Ion-ion attractions occur between positively charged cations and negatively charged anions. Because ions carry full positive and negative charges, the electrostatic attraction between them is much stronger than the attractions that occur between neutral molecules.
Unlike covalent compounds, ionic compounds do not exist as individual molecules. Instead, each ion is surrounded by multiple ions of the opposite charge, forming a repeating three-dimensional arrangement called an ionic crystal lattice (Figure 5.xx). The crystal lattice extends throughout the entire solid and is responsible for many of the characteristic properties of ionic compounds.
Figure \(\PageIndex{2}\): Sodium Chloride Crystal Lattice. Three-dimensional illustration of the sodium chloride crystal lattice. Purple spheres represent sodium ions (Na⁺) and green spheres represent chloride ions (Cl⁻) arranged in an alternating, repeating pattern. An inset shows the local coordination environment: each sodium ion is surrounded by six chloride ions, and each chloride ion is surrounded by six sodium ions. The figure emphasizes that solid NaCl is an extended crystal lattice rather than individual NaCl molecules. The formula NaCl represents the simplest whole-number ratio of ions in the crystal (a formula unit), not an individual molecule.
In sodium chloride (NaCl), each sodium ion (Na⁺) is surrounded by chloride ions (Cl⁻), and each chloride ion is surrounded by sodium ions. This repeating arrangement maximizes the attractive forces between oppositely charged ions while minimizing repulsions between ions of the same charge. The chemical formula of an ionic compound, such as NaCl, represents the simplest whole-number ratio of ions present in the crystal and is called a formula unit. A formula unit does not represent a single, isolated particle but rather the repeating ratio of ions throughout the crystal lattice.
Because ion-ion attractions are very strong, ionic compounds typically have:
- High melting points
- High boiling points
- Hard, crystalline structures
- Poor electrical conductivity as solids
- Good electrical conductivity when molten or dissolved in water, because the ions are free to move.
| Ionic Compound | Cation | Anion | Common Use |
|---|---|---|---|
| NaCl | Na⁺ | Cl⁻ | Table salt |
| MgO | Mg²⁺ | O²⁻ | Refractory ceramics, antacids |
| CaF₂ | Ca²⁺ | F⁻ | Mineral fluorite; source of fluoride |
| KBr | K⁺ | Br⁻ | Laboratory reagent |
| NaNO₃ | Na⁺ | NO₃⁻ | Fertilizer |
Although these compounds contain different ions, they are all held together by ion-ion electrostatic attractions.
Key Term: Formula Unit
A formula unit is the simplest whole-number ratio of cations and anions in an ionic compound. Unlike a molecular formula, a formula unit does not represent an individual molecule but the repeating composition of the ionic crystal lattice.
2. Attractions Involving Molecules (Intermolecular Forces)
Unlike ion-ion attractions, intermolecular forces are electrostatic attractions that occur between neighboring neutral or uncharged molecules. These attractions arise from regions of partial positive and negative charge within molecules. Although intermolecular forces are generally weaker than ion-ion attractions, they have a major influence on the physical properties of substances.
The strength of the intermolecular forces between molecules affects many observable properties, including:
- Melting point
- Boiling point
- Viscosity
- Surface tension
- Vapor pressure
- Solubility
In general, stronger intermolecular forces require more energy to separate neighboring molecules. As a result, substances with stronger intermolecular forces generally have higher melting points and boiling points than substances with weaker intermolecular forces.
For example, liquids boil when their molecules absorb enough thermal energy to overcome the attractive forces holding neighboring molecules together. Likewise, solids melt when their particles gain enough thermal energy to overcome the attractive forces that hold them in fixed positions.
There are three major types of intermolecular forces:
- Dipole-dipole interactions
- Hydrogen bonding
- London dispersion forces
As you read about each type of intermolecular force, remember that more than one intermolecular force may be present in a substance. Chemists often identify all of the intermolecular forces that are present and then determine which interaction has the greatest influence on the substance's physical properties.
Dipole-Dipole Interactions
In the previous section, we learned that some molecules are polar because they have an unequal distribution of electrons and their bond dipoles do not cancel. Polar molecules possess permanent dipoles, meaning one end of the molecule is partially positive (δ⁺) while the other end is partially negative (δ⁻).
When the partially positive end of one polar molecule is adjacent to the partially negative end of a neighboring molecule, an attractive dipole-dipole interaction occurs. If like partial charges are adjacent, a repulsive electrostatic interaction results (Figure 5.xx).
This behavior is especially apparent in liquids, where molecules are constantly moving, rotating, and colliding with one another. As neighboring molecules continually change orientation, they experience both attractive and repulsive interactions. Because attractive orientations are lower in energy, they are favored overall, allowing dipole-dipole interactions to help hold the liquid together.
Figure \(\PageIndex{3}\):Molecular Orientation Determines Dipole-Dipole Interactions (a, b) When the partially positive end (δ⁺) of one polar molecule is adjacent to the partially negative end (δ⁻) of a neighboring molecule, an attractive dipole-dipole interaction occurs. (c, d) When like partial charges (δ⁺–δ⁺ or δ⁻–δ⁻) are adjacent, repulsive electrostatic interactions occur. (e) In a liquid, molecules are in constant motion, continuously rotating, translating, and colliding with one another. As a result, neighboring molecules continually change orientation, experiencing both attractive and repulsive interactions. Because attractive orientations are lower in energy, they are favored overall, allowing dipole-dipole attractions to help hold the liquid together.
Molecular solids behave differently than liquids. In a molecular solid, intermolecular forces hold neighboring molecules in relatively fixed positions within a crystal. Although the molecules continue to vibrate, they generally cannot translate or rotate freely. As a result, favorable molecular orientations are maintained, producing a stable, ordered arrangement. As the solid is heated, thermal energy eventually overcomes these intermolecular forces, allowing the molecules to move more freely and the solid to melt.
One example of a molecule that exhibits dipole-dipole interactions is formaldehyde (CH₂O). Because formaldehyde is a polar molecule, neighboring molecules align so that the partially negative oxygen atom is attracted to the partially positive carbon atom of a nearby molecule.
Dipole-dipole interactions occur only between polar molecules. The strength of the interaction depends on both the magnitude of the molecular dipole and the orientation of neighboring molecules.
Figure \(\PageIndex{4}\): Dipole-Dipole Interactions Between Formaldehyde Molecules. Diagram illustrating dipole-dipole interactions between formaldehyde (CH₂O) molecules. An inset shows a single formaldehyde molecule with the oxygen atom labeled as partially negative (δ⁻) and the carbon atom labeled as partially positive (δ⁺), indicating the molecule's permanent dipole. The upper example shows an unfavorable orientation in which the partially positive carbon atoms face one another, producing electrostatic repulsion. The lower example shows a favorable orientation in which the partially negative oxygen atom of one molecule is adjacent to the partially positive carbon atom of a neighboring molecule, producing attractive dipole-dipole interactions that can extend throughout the liquid.
Hydrogen Bonding
Hydrogen bonding is a special type of dipole-dipole interaction that occurs when a hydrogen atom is covalently bonded to nitrogen (N), oxygen (O), or fluorine (F). These highly electronegative atoms pull electron density away from hydrogen, leaving it with a relatively large partial positive charge (δ⁺). A hydrogen bond forms when this partially positive hydrogen is attracted to a lone pair of electrons on a neighboring nitrogen, oxygen, or fluorine atom (Figure 5.xx). Both of these requirements must be present for hydrogen bonding to occur. Although hydrogen bonds are stronger than ordinary dipole-dipole interactions, they are still intermolecular forces, not covalent bonds.
Figure \(\PageIndex{5}\): Requirements for Hydrogen Bonding Between Molecules. Three-panel diagram illustrating the requirements for hydrogen bonding. Hydrogen bonding occurs when a hydrogen atom covalently bonded to nitrogen (N), oxygen (O), or fluorine (F) is attracted to a lone pair of electrons on a neighboring nitrogen, oxygen, or fluorine atom. Panel 1 shows a water molecule forming a hydrogen bond to the lone pair on an ammonia molecule. Panel 2 shows an ammonia molecule forming a hydrogen bond to the lone pair on a water molecule. Panel 3 shows hydrogen fluoride forming a hydrogen bond to the carbonyl oxygen of formaldehyde. In each example, the hydrogen bond is represented by a dashed line connecting a hydrogen atom covalently bonded to nitrogen, oxygen, or fluorine with a lone pair of electrons on a neighboring nitrogen, oxygen, or fluorine atom. The figure demonstrates that hydrogen bonding requires both a highly polarized H–N, H–O, or H–F bond and an available lone pair on a neighboring electronegative atom.
Because hydrogen bonding requires a hydrogen atom bonded directly to N, O, or F, not all polar molecules are capable of hydrogen bonding. For example, water (H₂O), ammonia (NH₃), and hydrogen fluoride (HF) all exhibit hydrogen bonding because they contain hydrogen atoms bonded to highly electronegative atoms. In contrast, formaldehyde (CH₂O) is a polar molecule and experiences dipole-dipole interactions, but it cannot form hydrogen bonds with other formaldehyde molecules because its hydrogen atoms are bonded to carbon rather than oxygen (Figure 5.x). However, in mixed solutions, the carbonyl oxygen of formaldehyde can accept hydrogen bonds from neighboring molecules (Figure 5.x.3)
Hydrogen bonding has a profound effect on the physical properties of many substances. Compared with molecules of similar size, substances capable of hydrogen bonding generally have higher boiling points, higher melting points, and greater surface tension because additional energy is required to overcome these stronger intermolecular attractions.
Water (Figure 5.xx) provides one of the best examples of the importance of hydrogen bonding. Each water molecule can form hydrogen bonds with several neighboring water molecules, creating a continuously changing network of intermolecular attractions. Although individual hydrogen bonds continually break and reform as water molecules move, the overall network helps explain many of water's unique properties, including its unusually high boiling point, strong surface tension, and ability to dissolve many ionic and polar substances.
Figure \(\PageIndex{6}\): Hydrogen Bonding Explains the Unique Properties of Water. Composite figure illustrating hydrogen bonding in water across its three phases. The upper left panel shows several water molecules with solid O–H polar covalent bonds within each molecule and dashed hydrogen bonds between neighboring molecules. The upper right panel shows a floating glacier, illustrating that solid ice is less dense than liquid water. The lower panels compare molecular arrangements in the three phases of water. In solid water (ice), hydrogen bonds form a stable, open network that holds molecules in fixed positions. In liquid water, hydrogen bonds continually break and reform as molecules move, creating a dynamic network. In water vapor (gas), molecules are widely separated and hydrogen bonding is negligible.
Photo of Glacial Ice by AWeith - Own work, CC BY-SA 4.0
Chemistry in Action: Why Does Ice Float?
Most substances become more dense when they freeze because their particles pack more closely together. Water behaves differently. As water freezes, hydrogen bonds organize the molecules into an open, hexagonal crystal structure that occupies more volume than the liquid. Because the same mass of water now occupies a larger volume, the density decreases, allowing ice to float on liquid water.
This unusual property helps insulate lakes and oceans during the winter, allowing aquatic life to survive beneath the surface.
Connection to Biology
Hydrogen bonding is one of the most important intermolecular forces in living systems. It helps stabilize the three-dimensional structure of proteins, holds the two strands of DNA together, and contributes to the unique properties of water that make life possible
London Dispersion Forces
Not all molecules are polar. Many molecules have no permanent dipole because their electrons are distributed symmetrically. Yet these substances can still exist as liquids and solids. If no attractive forces existed between their molecules, they would all remain gases under ordinary conditions.
The attraction that allows all atoms and molecules to condense into liquids and solids is called a London dispersion force. Unlike dipole-dipole interactions, which arise from permanent molecular dipoles, London dispersion forces arise from temporary fluctuations in electron density.
Electrons are constantly moving around the nuclei of atoms. At any instant, the electrons may be distributed slightly unevenly, producing a temporary (instantaneous) dipole in an atom or molecule (Figure 5.xx). This temporary dipole can distort the electron cloud of a neighboring atom or molecule, inducing a dipole in that neighbor. The resulting attraction between these temporary, induced dipoles is called a London dispersion force.
Video Tutorial on London Dispersion Forces By Bozeman Science.
Figure \(\PageIndex{7}\): Formation of London Dispersion Forces. Three-panel diagram illustrating the formation of London dispersion forces. Panel 1 shows an atom or molecule developing a temporary (instantaneous) dipole as electrons become unevenly distributed, creating partial negative (δ⁻) and partial positive (δ⁺) regions. Panel 2 shows this temporary dipole inducing an opposite temporary dipole in a neighboring atom or molecule by distorting its electron cloud. Panel 3 shows the two temporary dipoles attracting one another through a London dispersion force. A summary notes that London dispersion forces occur between all atoms and molecules because electrons are always moving, and that these forces become stronger in larger, more polarizable atoms and molecules.
Because electron motion is continuous, these temporary dipoles form and disappear extremely rapidly. Although any single London dispersion force is relatively weak, enormous numbers of these interactions occur simultaneously between neighboring particles. Together, they provide enough attraction to hold many substances together in the liquid and solid phases.
Unlike hydrogen bonding and dipole-dipole interactions, London dispersion forces occur between all atoms and molecules, regardless of whether they are polar or nonpolar. Consequently, every molecular substance experiences London dispersion forces. For polar molecules, London dispersion forces act in addition to dipole-dipole interactions and hydrogen bonding.
The strength of London dispersion forces depends primarily on polarizability, which describes how easily an electron cloud can be distorted. Larger atoms and larger molecules contain more electrons and larger electron clouds, making them more easily polarized. As a result, London dispersion forces generally become stronger as the number of electrons and the size of the molecule increase. As London Dispersion Forces increase due to the increased size of a molecule, the increased binding capacity gives them higher melting and boiling points (Fig 5.xx).
Figure \(\PageIndex{8}\): Molecular Size, Polarizability, and London Dispersion Forces. Comparison chart of four hydrocarbons—methane (CH₄), ethane (C₂H₆), propane (C₃H₈), and butane (C₄H₁₀). Each column includes the structural formula, a space-filling model, and an illustration of the electron cloud surrounding the molecule. As molecular size increases from methane to butane, the electron cloud becomes larger, the number of electrons and molar mass increase, polarizability increases, London dispersion forces become stronger, and boiling points increase from −161.5 °C to −0.5 °C. A horizontal arrow emphasizes the overall trend of increasing molecular size, electron cloud size, polarizability, and London dispersion force strength.
Polar Bonds Do Not Always Produce a Polar Molecule
For this section, we will use Carbon dioxide as an example in our analysis of intermolecular forces. Carbon dioxide (CO₂) provides an excellent example of the difference between polar bonds and a polar molecule. Each carbon-oxygen bond is polar because oxygen is more electronegative than carbon. As a result, each bond has a dipole that points toward the oxygen atom.
However, CO₂ has a linear molecular geometry (180°). The two identical bond dipoles point in exactly opposite directions and have equal magnitude. As a result, the bond dipoles cancel one another, and the molecule has no net dipole moment.
Because CO₂ is nonpolar, it does not exhibit dipole-dipole interactions or hydrogen bonding. Like all molecules, however, CO₂ experiences London dispersion forces. These dispersion forces are the dominant intermolecular force between neighboring carbon dioxide molecules. Thus, when determining the intermolecular forces within a molecule, it is critical to evaluate the polarity of the overall molecule, not just the individual bonds within the molecule.
Figure \(\PageIndex{9}\): Carbon Dioxide: Polar Bonds, Nonpolar Molecule. Three-panel diagram illustrating why carbon dioxide is a nonpolar molecule despite containing polar bonds. Panel A shows the Lewis structure and ball-and-stick model of CO₂ with bond dipoles pointing toward each oxygen atom, indicating that each carbon-oxygen bond is polar. Panel B shows the linear (180°) molecular geometry and illustrates that the two equal and opposite bond dipoles cancel, giving the molecule a net dipole moment of zero. Panel C shows two neighboring CO₂ molecules interacting through temporary, induced dipoles, demonstrating that London dispersion forces are the only intermolecular forces present because CO₂ has no permanent molecular dipole.
Polar bonds do not necessarily produce a polar molecule. Molecular geometry determines whether the individual bond dipoles cancel or combine to produce an overall molecular dipole.
Intermolecular forces depend on the polarity of the entire molecule, not the polarity of an individual bond.
Remember
- London dispersion forces occur between all atoms and molecules.
- Intermolecular forces depend on the polarity of the entire molecule, not the polarity of an individual bond.
- Polar molecules experience London dispersion forces in addition to dipole-dipole interactions and, when applicable, hydrogen bonding.
- Larger atoms and molecules generally exhibit stronger London dispersion forces because their electron clouds are more easily polarized.
Every atom and every molecule experiences London dispersion forces.
| Property | Dipole-Dipole | Hydrogen Bonding | London Dispersion |
|---|---|---|---|
| Occurs in polar molecules? | ✓ | ✓ | ✓ (all molecules) |
| Occurs in nonpolar molecules? | ✗ | ✗ | ✓ |
| Permanent dipoles required? | ✓ | ✓ | ✗ |
| Temporary dipoles involved? | ✗ | ✗ | ✓ |
| Requires H bonded to N, O, or F? | ✗ | ✓ | ✗ |
| Example | CH₂O | H₂O | I₂ |
3. Attractions Involving Ions and Molecules
After learning about interactions between ions and between molecules, we can now examine what happens when ions are mixed with polar molecules.
When an ionic compound dissolves in a polar solvent such as water, the ions separate from the crystal lattice and become surrounded by water molecules. The attractive force between an ion and the partial charges of a polar molecule is called an ion-dipole interaction.
Ion-dipole interactions are generally stronger than the intermolecular forces between neutral molecules because they involve the attraction between a full ionic charge and the partial charge of a polar molecule. Although individual ion-dipole interactions are typically weaker than individual ion-ion attractions, many ion-dipole interactions form simultaneously as water molecules surround each ion during dissolution. These new interactions help stabilize the separated ions in solution and often provide sufficient attraction to overcome the disruption of the crystal lattice and the hydrogen-bonding network of water. As a result, ion-dipole interactions play a critical role in dissolving ionic compounds, transporting ions in biological systems, and many chemical reactions that occur in aqueous solution.
Figure \(\PageIndex{10}\): Dissolving Sodium Nitrate in Water. Three-panel diagram illustrating the dissolution of sodium nitrate in water. Panel A shows a solid sodium nitrate crystal lattice held together by ion–ion attractions between sodium ions (Na⁺) and nitrate ions (NO₃⁻). Panel B shows liquid water in which neighboring water molecules are connected by hydrogen bonds. Panel C shows dissolved sodium nitrate. Water molecules surround each sodium ion with their oxygen atoms directed toward the positive charge and surround each nitrate ion with their hydrogen atoms directed toward the negatively charged oxygen atoms, forming ion–dipole interactions (hydration shells). A summary beneath the panels explains that dissolution involves breaking some ion–ion attractions in the crystal lattice and some hydrogen bonds between water molecules while forming many ion–dipole interactions around the dissolved ions. The combined effect stabilizes the separated ions in solution and favors dissolution.
Ion-dipole attractions replace many of the ion-ion and water-water interactions, allowing the crystal to dissolve.
When sodium nitrate is placed in water, the strong ion-ion attractions that hold the crystal lattice together must first be overcome. At the same time, some of the hydrogen bonds between neighboring water molecules must also be disrupted. Although breaking these attractive forces requires energy, new ion-dipole interactions form as water molecules surround the sodium and nitrate ions.
Water molecules orient themselves according to their partial charges. The partially negative oxygen atoms are attracted to the positively charged sodium ions, while the partially positive hydrogen atoms are attracted to the negatively charged oxygen atoms of the nitrate ion (Figure 5.xx).
When the newly formed ion-dipole interactions are sufficiently favorable, the ions separate from the crystal lattice and become dispersed throughout the solution. Each ion is surrounded by a shell of oriented water molecules called a hydration shell.
| Interaction | Present? | Example |
|---|---|---|
| Ion-ion | ✓ | Within NaNO₃ crystal |
| Hydrogen bonding | ✓ | Between neighboring water molecules |
| Dipole-dipole | ✓ | Between water molecules (H-bonding) |
| London dispersion | ✓ | Between all molecules |
| Ion-dipole | ✓ | Between Na⁺/NO₃⁻ and water |
Hydrogen bonding doesn't replace dipole-dipole interactions—it is the strongest, most specific form of dipole-dipole interaction.
Figure \(\PageIndex{11}\): Summary of Electrostatic Interactions. Hierarchy diagram summarizing the major types of electrostatic attractions. Electrostatic attractions are grouped into three categories: attractions involving ions (ion-ion attractions in an ionic crystal lattice, illustrated with NaCl), attractions involving ions and molecules (ion-dipole attractions between a sodium ion and surrounding water molecules), and attractions involving molecules (intermolecular forces), including hydrogen bonding between water molecules, dipole-dipole interactions between formaldehyde (CH₂O) molecules, and London dispersion forces between iodine (I₂) molecules. A strength scale at the bottom indicates the general trend in attraction strength: ion-ion > ion-dipole > hydrogen bonding > dipole-dipole > London dispersion forces.
Applying Your Knowledge:
Throughout this section, you have learned how to identify the electrostatic attractions present in different substances.
For each substance below:
- Determine whether the substance consists of ions, molecules, or ions dissolved in molecules.
- Identify all electrostatic attractions that are present.
- Identify the dominant electrostatic attraction.
(A) SO2
(B) CH3Cl
(C) CaCO3
(D) CoCl2 dissolved in water
(E) CH3OH dissolved in water
(F) CCl4
Concept Check:
(1) When sodium nitrate dissolves in water, which attraction is responsible for holding the sodium ion inside its hydration shell?
A. Hydrogen bonding
B. Dipole-dipole
C. Ion-dipole
D. London dispersion
(2) Why does carbon dioxide exhibit only London dispersion forces even though each C=O bond is polar?
A. The carbon-oxygen bonds are actually nonpolar.
B. The oxygen atoms cancel each other's electronegativity.
C. The bond dipoles cancel because CO₂ is linear.
D. Carbon dioxide contains too few electrons to be polar.
This page titled 5.4: Intermolecular Forces and Electrostatic Attractions was last modified on Tue, 11 Aug 2026 18:40:47 GMT and is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by Hadeel Abozenadah, Adam Bishop, Scott Bitner, Kaysha Lehman and Patricia Flatt.
The book could not be loaded just now.










