Opening the book…
We said at the beginning of this chapter that two kinds of reactions can take place when a nucleophile/Lewis base reacts with an alkyl halide. The nucleophile can either substitute for the halide by reaction at carbon or can cause elimination of HX by reaction at a neighboring hydrogen:
Elimination reactions are more complex than substitution reactions for several reasons. One is the problem of regiochemistry. What product results by loss of HX from an unsymmetrical halide? In fact, elimination reactions almost always give mixtures of alkene products, and the best we can usually do is to predict which will be the major product.
According to Zaitsev’s rule, formulated in 1875 by the Russian chemist Alexander Zaitsev, base-induced elimination reactions generally (although not always) give the more stable alkene product—that is, the alkene with more alkyl substituents on the double-bond carbons. In the following two cases, for example, the more highly substituted alkene product predominates.
By using the strong base hydroxide, we direct these reactions toward elimination (rather than substitution). In both cases there are two different sets of adjacent hydrogens available to the elimination reaction (these are colored blue and magenta). If the rate of each possible elimination was the same, we might expect the amounts of the isomeric elimination products to reflect the number of hydrogens that could participate in that reaction. For example, since there are three 1°-hydrogens (magenta) and two 2°-hydrogens (blue) on beta-carbons in 2-bromobutane, statistics would suggest a 3:2 ratio of 1-butene and 2-butene in the products. This is not observed, and the latter predominates by 4:1. This departure from statistical expectation is even more pronounced in the second example, where there are six adjacent 1° hydrogens (magenta) compared with one 3°-hydrogen (blue). These results point to a strong favoring the more highly substituted product double bond predicted by Zaitsev's Rule.
Another factor that complicates a study of elimination reactions is that they can take place by different mechanisms, just as substitutions can. We’ll consider three of the most common mechanisms—the E1, E2, and E1cB reactions—which differ in the timing of C–H and C–X bond-breaking.
In the elimination of HX from an alkyl halide, the more highly substituted alkene product predominates.
The E1, E2, and E1cB Reactions
Elimination reactions take place by three common mechanisms, E1, E2, and E1cB, all of which break the H-C and X-C bonds at different points of their mechanism. In addition, the different mechanisms will have subtle effects on the reaction products which will be discussed later in this chapter.
- In the E1 reaction, the C–X bond breaks first to give a carbocation intermediate, which undergoes subsequent base abstraction of H+ to yield the alkene.
- In the E2 reaction, base-induced C–H bond cleavage is simultaneous with C–X bond cleavage, giving the alkene in a single step.
- In the E1cB reaction (cB for “conjugate base”), base abstraction of the proton occurs first, giving a carbanion (R:–) intermediate. This anion, the conjugate base of the reactant “acid,” then undergoes loss of X– in a subsequent step to give the alkene.
All three mechanisms occur frequently in the laboratory, but the E1cB mechanism predominates in biological pathways.
E1 Mechanism
This mechanism starts the breaking of the C-X to provide a carbocation intermediate. A base removes a hydrogen adjacent to the original electrophilic carbon. The electrons from the broken H-C bond move to form the pi bond of the alkene. In much the same fashion as the SN1 mechanism, the first step of the mechanism is slow, making it the rate-determining step. This means that the reaction kinetics are unimolecular and first-order with respect to the substrate.
E2 Mechanism
The E2 mechanism takes place in a single concerted step. The rate at which this mechanism occurs follows second-order kinetics and depends on the concentration of both the base and alkyl halide. The base removes a hydrogen from a carbon adjacent to the leaving group. The electrons of the broken H-C move to form the pi bond of the alkene. In doing this, the C-X bond is broken, causing the removal of the leaving group.
E1cB Mechanism
The E1cB mechanism starts with the base deprotonating a hydrogen adjacent to the leaving to form a carbanion. In the second step of the mechanism, the lone pair electrons of the carbanion move to become the pi bond of the alkene. This causes the C-X bond to break and the leaving group to be removed.
Predicting the Products of an Elimination Reaction
For most elimination reactions, the formation of the product involves the breaking of a C-X bond from the electrophilic carbon, the breaking of a C-H bond from a carbon adjacent to the electrophilic carbon, and the formation of a pi bond between these two carbons. Which elimination mechanism is being followed has little effect on these steps. The limitations of each elimination mechanism will be discussed later in this chapter.
To determine the possible products, it is vital to first identify the electrophilic carbon in the substrate. Next, identify all hydrogens on carbons directly adjacent to the electrophilic carbon. Each unique adjacent hydrogen has the possibility of forming a unique elimination product. Break a C-H bond from each unique group of adjacent hydrogens, then break the C-X bond. Finally, connect the adjacent carbon and the electrophilic carbon with a double bond. Repeat this process for each unique group of adjacent hydrogens. Finally, compare all of the possible elimination products. The product whose double bond has the most alkyl substituents will most likely be the preferred product.
What product would you expect from reaction of 1-chloro-1-methylcyclohexane with KOH in ethanol?

Strategy
Treatment of an alkyl halide with a strong base such as KOH yields an alkene. To find the products in a specific case, locate the hydrogen atoms on each carbon next to the leaving group, and then generate the potential alkene products by removing HX in as many ways as possible. The major product will be the one that has the most highly substituted double bond—in this case, 1-methylcyclohexene.
Solution

What alkyl halides might the following alkenes have been made from?
- Answer
-
- 1-Bromo-3,6-dimethylheptane
- 4-Bromo-1,2-dimethylcyclopentane
Ignoring double-bond stereochemistry, what products would you expect from elimination reactions of the following alkyl halides? Which product will be the major product in each case?
- Answer
-
- Major: 2-methyl-2-pentene; minor: 4-methyl-2-pentene
- Major: 2,3,5-trimethyl-2-hexene; minor: 2,3,5-trimethyl-3-hexene and 2-isopropyl-4-methyl-1-pentene
- Major: ethylidenecyclohexane; minor: cyclohexylethylene
Predict the major products of the following reactions.
- Answer
-
This page titled 11.7: Elimination Reactions- Zaitsev's Rule was last modified on Mon, 20 Oct 2025 19:18:18 GMT and is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by Sol Parajon Puenzo (Cañada College) via source content that was edited to the style and standards of the LibreTexts platform.
The book could not be loaded just now.




