1.4.3: Volume of a Rubber Stopper

Lab Manual for General, Organic and Biological Chemistry-1-semester · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY-NC 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    1.4.3: Volume of a Rubber Stopper

    C. Volume of a Rubber Stopper (Water Displacement Method)

    1.  Fill the 100 mL graduated cylinder with de-ionized water to approximately 50 ml using the wash bottle provided in the locker. Read the volume at the bottom of the lower meniscus. Record the volume to the 0.1 place.

    2.  Carefully place the rubber stopper from part A into the graduated cylinder so that it is submerged. Read, record the new volume to 0.1 place.

    3.  Calculate the volume of the rubber stopper by difference.

    Observations

    Read the volume at the bottom of the lower meniscus. Record the volume to the 0.1 place.

    Initial volume of water in cylinder                                         -------------------mL

    Final volume of water in cylinder                                          -------------------mL

    Volume of rubber stopper                                                      -------------------mL 

    Return the rubber stopper to your instructor.


    This page titled 1.4.3: Volume of a Rubber Stopper was last modified on Fri, 14 Jun 2024 20:04:23 GMT and is shared under a CC BY-NC 4.0 license and was authored, remixed, and/or curated by Deboleena Roy.