7.4.2: B. Effect of Buffers on pH

Lab Manual for General, Organic and Biological Chemistry-1-semester · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY-NC 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    7.4.2: B. Effect of Buffers on pH

    B. Procedure and Observations for Effect of Buffers on pH

    Effect of Adding an Acid

    1. Please review the procedure on use of the pH meter on part A and apply to this part of the experiment.
    2. Place 2.5 mL of each of the following solutions into 4 culture tubes.

    a. A buffer with pH 9

    b. A buffer with pH 3

    c. 0.1 M NaCl

    d. Tap H2O

    1. Determine the pH of each sample using the pH meter. Record.
    2.  Add 2 drops of 0.1 M HCl (acid) to test tube a. Stir with a glass rod to mix. Measure the pH with a meter and record.
    3. Add 2 more drops of 0.1 M HCl. Stir with a glass rod to mix. Measure and record the pH. Repeat this procedure with each of the other solutions.
    4. Determine the change in pH, after adding drops of acid. The pH change should be calculated using the difference in initial pH of the sample and pH after drops of acid are added. Identify the solutions that are buffers.
    Solution Initial pH pH after adding 2 drops of HCl pH after adding 4 drops of HCl pH change on adding drops of HCl Is this sample a buffer?
    pH 9 buffer          
    pH 3 buffer          
    0.1 M NaCl          
    Tap H2O          

    Disposal

    Contents of the test tube in this section are disposed in the chemical waste container. Wash the culture tubes with tap water from the sink at your work bench before you proceed to the next step.

     

    Effect of Adding a Base:

    1. Please review the procedure on use of the pH meter on page 7 and apply to this part of the experiment.
    2. Place 2.5 mL of each of the following solutions into 4 culture tubes.

    a. A buffer with pH 10

    b. A buffer with pH 4

    c. 0.1 M NaCl

    d. Tap H2O

    1. Determine the pH of each sample using a pH meter. Record.
    2. Add 2 drops of 0.1 M NaOH (base) to test tube a. Stir with a glass rod to mix. Measure the pH with a meter and record.
    3. Add 2 more drops of 0.1 M NaOH. Stir with a glass rod to mix. Measure and record the pH. Repeat this procedure with each of the other solutions.
    4. Determine the change in pH after adding drops of base. The pH change should be calculated using the difference in initial pH of the sample and pH after drops of base are added. Identify the solutions that are buffers.

     

    Solution Initial pH pH after adding 2 drops of NaOH pH after adding 4 drops of NaOH pH change on adding drops of NaOH Is this sample a buffer?
    pH 10 buffer          
    pH 4 buffer          
    0.1 M NaCl          
    Tap H2O          

    Disposal

    Contents of the culture tube in this section are disposed in the chemical waste container. Wash the culture tubes with tap water from the sink at your work bench and rinse with de-ionized water from the wash bottle provided in your locker. Return the 4 culture tubes to your instructor.


    This page titled 7.4.2: B. Effect of Buffers on pH was last modified on Wed, 11 Feb 2026 16:59:23 GMT and is shared under a CC BY-NC 4.0 license and was authored, remixed, and/or curated by Deboleena Roy.