Opening the book…
F. Families of Elements
1. Place three small test tubes in a test tube rack and add 1 mL of chloride, bromide and iodide into separate test tubes. Add drops of silver nitrate solution to each test tube till precipitate formation is observed. Mix the contents of the test tube by swirling the test tube or with the help of a glass rod. Record the color and precipitate formed in the data table.
|
Solution tested |
Group # of the nonmetal |
Observations after adding the reagent silver nitrate |
|---|---|---|
| Chloride solution | ||
| Bromide solution | ||
| Iodide solution |
2. Place six small test tubes in a test tube rack Add 1 mL of barium, calcium, strontium, lithium, potassium and sodium solutions into separate test tubes. Add drops of ammonium carbonate solution to each test tube. If precipitate forms, record color and precipitate formed in the data table. If there is no precipitate formed, write no reaction.
| Solution tested | Group # of the metal | Observations after adding the reagent ammonium carbonate |
|---|---|---|
| Barium solution | ||
| Calcium solution | ||
| Strontium solution | ||
| Lithium solution | ||
| Potassium solution | ||
| Sodium solution |
Dispose contents of the nine test tubes in the chemical waste container Wash the test tubes with tap water in your work area and rinse with distilled water from your wash bottle. Store the clean test tubes in your locker.
This page titled 1.4.6: Families of Elements was last modified on Fri, 21 Jun 2024 19:48:51 GMT and is shared under a CC BY-NC 4.0 license and was authored, remixed, and/or curated by Deboleena Roy.
The book could not be loaded just now.