7.2: Using Calibrated Glass Pipettes

Organic Chemistry Lab Techniques · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY-NC-ND, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    7.2: Using Calibrated Glass Pipettes
    Table 7.2: Procedural summary for using calibrated glass pipettes.
    Illustration Illustration Illustration Illustration

    Place pipette tip in reagent bottle, squeeze pipette bulb, and connect to the pipette.

    Partially release your hand to create suction. Do not let to completely or liquid will withdraw forcibly and possibly into the bulb.

    Apply suction until liquid is withdrawn to just past the desired mark.

    Remove the pipette bulb and place your finger atop the pipette.

    Allow tiny amounts of air to be let into the top of the pipette by wiggling your finger or a slight release of pressure.

    Drain the liquid to the desired mark.

    Tightly hold the pipette with your finger, bring it to the transfer flask and deliver the reagent to the desired mark.

    Touch the pipette to the side of the container to dislodge the drip at the end of the pipette.

    Illustration

    If a pipette is drained to the tip,

    • To-deliver (T.D.) pipettes and volumetric pipettes should not be blown out.
    • To-contain (T.C.) pipettes should be "blown out".
    Illustration Note: If pipette is wet with a different solution before use, obtain a fresh one or "condition" the pipette with two rinses of the reagent.

     


    This page titled 7.2: Using Calibrated Glass Pipettes was last modified on Tue, 11 Aug 2020 09:36:44 GMT and is shared under a CC BY-NC-ND license and was authored, remixed, and/or curated by Lisa Nichols via source content that was edited to the style and standards of the LibreTexts platform.