5.5.1: Shading

Applied Botany · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY-NC-SA 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    5.5.1: Shading

    In landscaping, plants should be purchased to fit the light levels of the environment. To meet the light demands of horticultural crops, light is often controlled through application of shading materials or through artificial light sources. Light intensity can be too much for some plants. To minimize their exposure to light in outdoor spaces, natural and artificial shading can be employed. Shade-loving plants can be placed in the landscape to take advantage of natural shade from buildings, fences, and other plants. If natural shade is inadequate, artificial shade can be created.

    Lath shade houses (Figure 5-24) are structures that provide dappled light. The strips of wood block light coming in. The resulting shadow (shade) moves as the solar angle changes throughout the day. Shade houses are often seen in big gardens and in commercial nurseries. Shade sails or canopies can provide shade for both people and plants. These shades can be easily erected at little cost.

    Plants growing in a lathe shade house.
    Figure 5-24. Lath shade house. https://www.bourtonhouse.com

    Greenhouse can also benefit from filtering out some of the light, particularly during summers. Most plants cannot use all the solar radiance of a bright summer's day. While the greenhouse structure itself will block some of the light, excess light entering the house can cause plant damage directly (over excitation of the photosystems) or indirectly (heat damage and water loss).

    Shade cloths are synthetic tarps that can be installed either inside or outside of the greenhouse depending on specific needs of the plants (Figure 5-25). Shade cloths placed outside the greenhouse block the light before it enters and are most effective at keeping the house cooler in the summer. Shade cloths inside the house a slightly less effective for heat control since the light enters the house before encountering the barrier. There are, however, some advantages to having the cloth inside the greenhouse. One benefit is that the cloth is not subjected to the elements and thus tends to have longer life expectancies. With interior shade cloths, coverage and non-coverage can be mechanized. With the shade cloth on tracks, it can be manipulated based on PPFD (photosynthetic photon flux density). Automated systems can open and close the shade curtains throughout the day as light levels change.

    A) Shade cloth deployed. B) 4 close-ups at 30%, 40%, 50% and 60% shading.
    Figure 5-25. A -Shade cloth deployed inside a greenhouse. B-Shade cloth at various shading levels. (A-John Bartok, Jr. 2016; B- https://green-tek.com/shadenets/)

    Shade cloth comes in a variety of meshes to filter out more or less light. They are rated based on how much of the light intensity is lost with the cloth. A 30%-shade cloth blocks out 30% of the solar input while a 60%-cloth blocks out 60% of the light.


    This page titled 5.5.1: Shading was last modified on Fri, 13 Nov 2026 17:14:37 GMT and is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by Stephanie Harvey.