Opening the book…
A dilution factor is the ratio of final volume to the volume of the starting solution placed into the mixture. Combining 1.0 mL stock with 9.0 mL compatible diluent gives 10.0 mL total, a dilution factor of 10, and one-tenth of the starting concentration.
A serial dilution is a sequence in which each diluted mixture supplies the sample for the next dilution. Mix each stage sufficiently before transferring. Poor mixing carries its error forward.
Suppose a 1.0 mg/mL solution is diluted tenfold three times. The resulting concentrations are 0.10 mg/mL, 0.010 mg/mL, and 0.0010 mg/mL. The overall dilution factor is 10 × 10 × 10 = 1,000.
Identify each tube and keep a record of transfers. The diluent must be suitable for the purpose. For treatment preparation, evaluate both the active compound and its vehicle in the final culture volume. Do not assume that a mathematical dilution makes a solvent harmless.
Distinguish a dilution used to prepare an experimental condition from the routine dilution of cells during subculture. Both involve volume calculations, but one defines a chemical condition and the other changes cell concentration.

Attribution: Images AI-generated using ChatGPT Modified by Emalee Mackenzie, Irvine Valley College. Licensed under CC BY-NC-SA
This page titled 6.12: Dilution Factors and Serial Dilutions was last modified on Wed, 21 Oct 2026 01:36:07 GMT and is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by Emalee MacKenzie.
The book could not be loaded just now.