Opening the book…
A serological pipette is a graduated pipette commonly used for milliliter-scale transfers. A micropipette transfers smaller volumes, often measured in microliters. One milliliter equals 1,000 microliters. Select a device with a stated range that includes the required volume. A pipette labeled for 20–200 microliters should not be used to transfer 10 microliters. Check the exact model because names and display conventions vary.
A pipette controller moves liquid into and out of a serological pipette. Mouth pipetting is never acceptable. Protect the controller from liquid entering its interior, and use the appropriate pipette type and volume markings. Many micropipettes use air displacement, where a moving piston changes the air space above the liquid. Their performance depends on correct tips, a good seal, suitable technique, and the liquid's properties. In standard forward pipetting, press to the first plunger stop before drawing up the set volume. To dispense, move through the first stop and then to the second as the device instructions direct. Starting from the second stop can draw up extra liquid. Other pipetting techniques use different steps, so identify the intended technique before beginning.
Move the plunger smoothly. Excessive immersion, rapid release, and poor positioning can affect delivery. Keep a liquid-filled pipette oriented as specified and avoid drawing liquid into the instrument. Use a fresh suitable tip when changing samples or when contamination could occur. Filtered tips help limit the passage of aerosols toward the pipette, but they do not replace careful handling or maintenance.
"How to Use a Micropipette" Carolina Science https://www.youtube.com/watch?v=Jfqafjt4q6U Standard YouTube License. No changes made.
This page titled 2.8: Pipettes and Accurate Liquid Transfer was last modified on Wed, 21 Oct 2026 01:35:35 GMT and is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by Emalee MacKenzie.
The book could not be loaded just now.