Opening the book…
A seeding target specifies the number or density of cells intended at the start of a culture or experiment. Identify whether it is based on viable cells, total cells, cells/mL, or cells per surface area. Use the cell-specific target for the actual procedure. The examples below illustrate arithmetic; they do not prescribe growth conditions.
To obtain a stated number of viable cells, use: suspension volume needed = target viable cells ÷ viable stock concentration.
Suppose an experiment needs 200,000 viable cells and the stock contains 1.0 × 10⁶ viable cells/mL. The required stock volume is 200,000 cells ÷ 1,000,000 cells/mL = 0.20 mL, or 200 µL. If the specified final volume is 1.0 mL, add 0.80 mL of the appropriate medium, assuming no other additions.
For an adherent culture, convert an area-based target to a cell number first. If a stated target is 5,000 viable cells/cm² in a vessel with 25 cm² growth area, the required number is 5,000 × 25 = 125,000 viable cells. With the same stock, use 0.125 mL, or 125 µL. The medium volume is set separately by the vessel and culture procedure. A T-25 name refers to growth area; it does not mean that the working volume is 25 mL.
For suspension cultures, multiply the target concentration by the final culture volume. A stated target of 0.50 × 10⁶ viable cells/mL in 10.0 mL requires 5.0 × 10⁶ viable cells. From a stock containing 1.0 × 10⁶ viable cells/mL, transfer 5.0 mL and add 5.0 mL medium. This arithmetic is suitable for planning a THP-1 suspension only when the actual cell-specific procedure calls for that target.
The dilution equation C₁V₁ = C₂V₂ means that starting concentration times transferred stock volume equals final concentration times final volume. Use the same cell category on both sides and consistent volume units. The equation assumes that cells are conserved during mixing.
Check that the stock volume you calculated fits inside the planned final volume. If it does not, the stock is too dilute to reach the target by adding medium. Review cell availability and the allowed method for concentrating or replanning the suspension. For multiwell work, calculate cells and final mixture volume for all wells. Include any stated allowance for transfer loss. Mix as directed between dispensing steps.

Attribution: Images AI-generated using ChatGPT Modified by Emalee Mackenzie, Irvine Valley College. Licensed under CC BY-NC-SA
This page titled 10.9: Calculating a Seeding Volume was last modified on Wed, 21 Oct 2026 01:35:30 GMT and is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by Emalee MacKenzie.
The book could not be loaded just now.