1.4.2: Becoming Familiar with Aseptic Techniques

OER - BIOL 2420 Laboratory Manual · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    1.4.2: Becoming Familiar with Aseptic Techniques

    You will need to perform the following steps without error in front of the instructor/facilitator for a proficiency check before you will be given the materials to complete any additional exercises in this laboratory session.

    Bunsen burner with flame adjusted to show a visible inner blue cone.

    Figure 1. Bunsen burner with flame adjusted to have blue cone. Credit: Sherry Smith

    1. Begin by disinfecting your work area.
    2. Obtain the following items: Bunsen burner Inoculating loop Test tube rack Simulation broth culture Simulation sterile broth
    3. Light your Bunsen burner. Be sure to adjust the Bunsen burner so that an inner blue cone is clearly visible. Remember, this is the hottest portion of the flame; you will sterilize your inoculation tool in this area.
    4. Grasp your inoculating loop in your dominant hand holding it like a pencil. You will use the first three fingers of your dominant hand to manipulate your inoculating tool.
      Proper technique for grasping the inoculating loop.

      Figure 2. Proper technique for grasping the inoculating loop. Credit: Sherry Smith

    5. Flame the inoculating loop ensuring that it turns red hot, and then let it cool for approximately 15-30 seconds. Do not allow the instrument to bump against anything and do not lay it down to allow it to cool.
      Proper flaming technique for sterilizing the full length of the inoculating loop wire.

      Figure 3. Proper flaming technique for sterilizing the inoculating loop. Ensure the entire wire becomes red hot. Credit: Sherry Smith

    6. Use your non-dominant hand to pick up the test tube marked “stock culture.” This test tube is representative of a culture of bacteria from which you will collect a culture sample to transfer to another media source. Flick the test tube to practice suspending the bacteria in the culture. Generally, bacteria will settle in the tube and will need to be suspended for transfer.
    7. Use the last two fingers of your dominant hand to remove the cap of the test tube. Do not set the cap down on the lab bench.
      Proper technique for grasping the cap of a test tube during aseptic transfer.

      Figure 4. Proper technique for grasping the cap of a test tube. Credit: Sherry Smith

    8. Pass the mouth of the test tube through the flame of the Bunsen burner.
      Flaming the mouth of a test tube during aseptic transfer.

      Figure 5. Flaming the mouth of a test tube. Credit: Sherry Smith

    9. Use the sterilized loop to obtain a loopful of sample, without touching the sides of the test tube.
    10. Hold the loop steady and pass the mouth of the tube through the flame and then recap the test tube. Place the test tube back in the test tube rack.
    11. Pick up the test tube marked “Sterile Broth.” This test tube of water is representative of the sterile media to which the sample of bacteria will be transferred. Remove the cap using the smallest two fingers of your dominant hand.
    12. Flame the mouth of the test tube.
    13. Insert the loop containing the inoculum and swirl the loop in the simulation “sterile broth”. Remove the loop without touching the sides of the test tube.
    14. Flame the mouth of the tube. Recap the test tube and return it to the test tube rack.
    15. Flame the loop until it is red hot. Flaming the loop kills any bacteria remaining on the instrument.

    You should continue practicing the steps listed above until you feel competent to perform your proficiency check. Once you have successfully completed the proficiency check you will be granted access to the bacterial stock culture and media needed to complete the next activity.


    This page titled 1.4.2: Becoming Familiar with Aseptic Techniques was last modified on Sat, 25 Jul 2026 03:43:10 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Sherry Smith.