4.2.2: Direct Microscopic Count Activity

OER - BIOL 2420 Laboratory Manual · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    4.2.2: Direct Microscopic Count Activity
    1. Obtain the E. coli stock culture and flick the tube until the bacteria are evenly suspended throughout the media.
    2. Use a sterile pipette to aseptically obtain 1 ml of the sample and transfer it to the clean test tube.
    3. Use a fresh pipette to transfer 1 ml of methylene blue dye to the sample in the test to, creating a 1/2 dilution.
    4. Ensure the counting chamber is clean, then place the cover slip over the chamber.
    5. Use a pipette to place one drop of the dyed sample at the edge of the cover slip. Allow time for the sample to move completely into the chamber as a result of capillary action.
    6. Utilize a compound light microscope on oil immersion to count the number of bacterial cells present. You will count five of the large squares and then determine the average number of cells present.
    7. Calculate the total number of cells present in the original sample using the formula below and then record your answer in the provided space.

    Avg, #cells x 1,250,000 x dye dilution factor = #cells/cm3(ml)

    _______________ cells/ml


    This page titled 4.2.2: Direct Microscopic Count Activity was last modified on Sat, 25 Jul 2026 03:43:08 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Sherry Smith.