14.1: General Principles and Laboratory Management

Quality and Regulatory Compliance in Bioscience · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY-SA 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    14.1: General Principles and Laboratory Management

    Quality systems for trustworthy results.pngLaboratory results must be trustworthy and useful for their intended purpose. A quality system supports suitable methods, competent personnel, controlled equipment, accurate records, and review of results. Pharmaceutical QC laboratories must meet applicable cGMP requirements. ISO standards may also be relevant, but ISO 9000 is not a universal laboratory testing requirement. ISO/IEC 17025 addresses the competence of testing and calibration laboratories.

    Three important foundations are trained personnel with appropriate skills, clearly assigned responsibilities, and adequate supervision. These foundations need support from sufficient staffing, suitable facilities, reliable supplies, written procedures, and management commitment.

    Training must be documented and matched to the work. New analysts need instruction and an appropriate assessment of competence before working independently. Experienced analysts also need continuing training, including training on revised methods and equipment. Attendance alone does not demonstrate competence.

    Laboratory personnel must be able to report results honestly, including failures and uncertainty. Managers must not pressure analysts to invent, conceal, or change results to obtain a preferred outcome. Data must remain attributable, complete, accurate, and traceable. Concerns should be reported through defined quality and escalation processes.

    For a teaching example, imagine an assay indicates that a tablet batch contains less active ingredient than its lower acceptance limit. A supervisor asks an analyst to enter a passing result. The analyst must preserve the actual data, decline to falsify the record, and report the concern through the quality system. The result requires investigation, not a replacement number. This hypothetical example illustrates the need for honest reporting and prompt escalation.

    Equipment must be suitable for its intended use and appropriately maintained, calibrated, verified, or qualified. New equipment is not automatically better or more suitable than an existing instrument. Decisions to replace equipment should consider its capability, reliability, support, and risks to the work.

    The National Institute of Standards and Technology (NIST) provides measurement science and reference resources. Metrological traceability links a measurement result to a stated reference through a documented, unbroken chain of calibrations, each contributing to measurement uncertainty. It is not simply a sticker or a claim that equipment is NIST certified.

    Control environmental conditions when they can affect results or product quality. Relevant factors can include temperature, humidity, vibration, airborne particles, microbial contamination, and lighting. Define appropriate limits, monitoring, and actions for the work rather than assuming every laboratory needs identical controls.


    This page titled 14.1: General Principles and Laboratory Management was last modified on Mon, 09 Nov 2026 04:56:33 GMT and is shared under a CC BY-SA 4.0 license and was authored, remixed, and/or curated by .