Learn · Biomedical Ultrasound: Fundamentals of Imaging and Micromachined Transducers
Lecture 27 of 62Week 6 Lithography
Lithography
Prof. Himanshu Shekhar, Prof. Karla P. Mercado-Shekhar and Prof. Hardik J. Pandya · IIT Gandhinagar IISc Bangalore
Credits and licence
- From
- Biomedical Ultrasound: Fundamentals of Imaging and Micromachined Transducers, IIT Gandhinagar IISc Bangalore (at NPTEL)
- Licence
- CC BY-NC-SA, as NPTEL states it. Non-commercial use only.
- Attribution
- NPTEL states: "Distributed under Creative Commons Attribution-ShareAlike / CC BY - NC - SA", beside a BY-NC-SA badge. Coordinated by IISc Bangalore.
- Who can watch
- Teens profiles and older. How courses are placed
All the lectures
- Introduction to the course
- Introduction to ultrasound imaging
- Basics of wave propagation
- Scattering and acoustic wave equation
- Intensity, Reflection, Transmission
- Recap of Week 1
- Introduction to Imaging modes
- Imaging artifacts
- Ultrasound imaging systems
- Transducers and transducer arrays
- Recap of Week 2
- Introduction to Microfabrication
- Silicon and Silicon Dioxide
- Numericals on Ultrasound
- Introduction to Cleanroom
- Silicon and Silicon Dioxide II
- Thermal Oxidation I
- Thermal Oxidation II
- Thermal Evaporation theory
- Thermal Evaporation lab demonstration
- E beam Deposition theory
- E beam deposition lab demonstration
- Sputtering theory
- Sputtering lab demonstration
- Chemical Vapor Deposition I
- Chemical Vapor Deposition II
- Lithography
- Lithography lab demonstration
- Lithography optics I
- Lithography optics II
- Introduction to Beamforming
- Beamforming Pt. 2
- Beamforming and Signal Processing
- Intro to Field II simulation - impulse response, beam pattern
- Recap of week 7
- Ultrasound image quality metrics
- Contrast agents
- Contrast-enhanced imaging
- Nonlinear acoustics and imaging
- Recap of week 8
- Field II imaging simulations
- Doppler ultrasound
- Color and Power Doppler ultrasound
- Quantitative Ultrasound
- Recap of week 9
- Ultrasound bioeffects
- Bioeffects and safety
- Ultrasound elastography
- Shear wave imaging
- Recap of week 10
- RIE and DRIE
- Wet etching and Miller Indices I
- Wet etching and Miller Indices II
- Wet bench lab demonstration
- PCB (Printed Circuit Board)
- Ultrasonic Sensor
- Material Characterisation : STM and AFM
- Wire bonding lab demo
- Piezoelectric polymers
- Characterisation of materials I
- Characterisation of materials II
- Characterisation of materials III