Learn · NPTEL

Course11710614995 lectures

Design and Analysis of VLSI Subsystems

Prof. Madhav Rao · IIIT Bangalore

Start with lecture 1 At NPTEL

Lectures

week-01

  1. 1.1 - Understanding Silicon Video
  2. 1.2 - Introduction to NMOS Video
  3. 1.3 - NMOS Transistor Working Video
  4. 1.4 - PMOS Transistor Video
  5. 1.5 - MOS Capacitances Video
  6. 1.6 - Non Ideal MOS model Video
  7. 1.7 - Short channel current model Video
  8. 1.8 - Short channel current model analysis Video

week-02

  1. 2.1 - Channel Length modulation index Video
  2. 2.2 - DC characteristics of Inverter Video
  3. 2.3 - Transfer characteristics of Inverter Video
  4. 2.4 - Skewed Inverter Video
  5. 2.5 - Skewed Inverter and threshold voltage Video
  6. 2.6 - Equivalent of transistors in series Video
  7. 2.7 - Transmission Gate Video

week-03

  1. 3.1 - Bad CMOS Buffer - Part1 Video
  2. 3.2 - Bad CMOS Buffer - Part2 Video
  3. 3.3 - Noise margin characteristics of inverter Video
  4. 3.4 - Noise margin parameters Video
  5. 3.5 - Introduction to Delay in CMOS Video
  6. 3.6 - Transient analysis of CMOS Inverter Video
  7. 3.7 - RC approximated delay Video
  8. 3.8 - Switching Resistance Video

week-04

  1. 4.1 - CMOS Inverter approximated to RC Circuit Video
  2. 4.2 - Elmore delay Video
  3. 4.3 - Delay of FO4 inverter Video
  4. 4.4 - Extracting capacitances of 3-Nand gate for delay estimation Video
  5. 4.5 - Characterizing Delay of NOR gate Video
  6. 4.6 - Linear Delay model Video
  7. 4.7 - Logical effort and Parasitic delay Video

week-05

  1. 5.1 - Logical effort and Parasitic delay for different gates Video
  2. 5.2 - Logical effort for short-channel current model Video
  3. 5.3 - Ring Oscillator design Video
  4. 5.4 - Optimizing Gate Size Video
  5. 5.5 - Optimizing Gate Sizes Example Video
  6. 5.6 - Optimizing the Stages for an inverter path Video
  7. 5.7 - Optimizing the Stages for a General Circuit Video
  8. 5.8 - Decoder Design Video

week-06

  1. 6.1 - Introduction to Combinational Circuit and assymetric gates Video
  2. 6.2 - Assymetric Gates analysis Video
  3. 6.3 - Assymetric Gates analysis using short-channel current model Video
  4. 6.4 - Introduction to Skewed gates Video
  5. 6.5 - Skewed gates and best P/N ratio Video
  6. 6.6 - vIntroduction to Pseudo NMOS Video
  7. 6.7 - Psudeo NMOS gates Video
  8. 6.8 - Other Logic Family Video
  9. 6.9 - Dynamic Logic and Domino logic Video

week-07

  1. 7.1 - Domino gates Video
  2. 7.2 - Introduction to Stick Diagram Video
  3. 7.3 - Stick Diagram for different gates Video
  4. 7.4 - Applying Eulers path for stick diagram representations Video
  5. 7.5 - Multiplexer design and layout Video
  6. 7.6 - Introduction to Interconnects Video
  7. 7.7 - Interconnects - RC delay, and Energy Video

week-08

  1. 8.1 - Introduction to crosstalks in interconnects Video
  2. 8.2 - Transient analysis in Crosstalk Video
  3. 8.3 - Introduction to Repeaters in Interconnect Engineering Video
  4. 8.4 - Repeater Design Video
  5. 8.5 - Energy and delay analysis for interconnectwith repeaters Video
  6. 8.6 - Repeater Design and Energy-Delay-Product Video
  7. 8.7 - Introduction to Power Video

week-09

  1. 9.1 - Switching Power and Energy Estimation Video
  2. 9.2 - Activity factor and estimating dynamic power for a combinational circuit design Video
  3. 9.3 - Analyzing Dynamic Power Video
  4. 9.4 - Energy estimation through driving factor Video
  5. 9.5 - Energy expression in terms of delay Video
  6. 9.6 - Voltage Scaling Video
  7. 9.7 - DVFS Video

week-10

  1. 10.1 - Introduction to subthreshold leakage current model Video
  2. 10.2 - Subthreshold leakage current and Gate leakage current Video
  3. 10.3 - Estimating Static Power Video
  4. 10.4 - Introduction to CMOS Latch design Video
  5. 10.5 - CMOS Latch Design Video
  6. 10.6 - CMOS Latch and flipflop design Video

week-11

  1. 11.1 - Static Timing Analysis Video
  2. 11.2 - Static Timing Analysis - Continued Video
  3. 11.3 - Static Timing Analysis - Part2 Video
  4. 11.4 - Static Timing Analysis - Part2.1 Video
  5. 11.5 - Static Timing Analysis - Part3 Video
  6. 11.6 - TPDQ and TPCQ Video
  7. 11.7 - Static Timing Analysis - Part4 Video
  8. 11.8 - Static Timing Analysis - Part5 Video
  9. 11.9 - Static Timing Analysis - Part6 Video
  10. 11.10 - SET and CLEAR enabled Latch and Flipflop Design Video

week-12

  1. 12.1 - 1-bit Adder design Video
  2. 12.2 - Adder-Part2 Video
  3. 12.3 - PG architecture - Part1 Video
  4. 12.4 - PG architecture - Part2 Video
  5. 12.5 - Carry Skip Adder Video
  6. 12.6 - Carry Look Ahead and Carry Increment Adder Video
  7. 12.7 - Other Adder Subsystems Video
  8. 12.8 - Approximate Multipliers - Part 1 Video
  9. 12.9 - Approximate Multipliers - Part 2 Video
  10. 12.10 - Approximate Adder Video

Live Session

  1. Live Session 26-02-2022 Video

Syllabus and materials

At NPTEL, as the course publishes them.

Credits and licence

Institution
IIIT Bangalore
Department
Electronics & Communication Engineering
Teacher
Prof. Madhav Rao
Level
Undergraduate
Language
English
Subjects
Engineering, Society and politics
Source
NPTEL
Licence
CC BY-NC-SA, as NPTEL states it. Non-commercial use only. NPTEL's terms
Attribution
NPTEL states: "Distributed under Creative Commons Attribution-ShareAlike / CC BY - NC - SA", beside a BY-NC-SA badge. Coordinated by IIT Madras.
Who can watch
NPTEL gives no rating. Invisible Network shows it to Teens profiles and older, judged from what the source says about it. How courses are placed