Learn · Risk and Reliability of Offshore Structures
Lecture 47 of 58Module 3
Lecture 7 - Risk Assessment
Prof. Srinivasan Chandrasekaran · IIT Madras
Credits and licence
- From
- Risk and Reliability of Offshore Structures, IIT Madras (at NPTEL)
- Licence
- CC BY-NC-SA, as NPTEL states it. Non-commercial use only.
- Attribution
- NPTEL states: "Distributed under Creative Commons Attribution-ShareAlike / CC BY - NC - SA", beside a BY-NC-SA badge.
- Who can watch
- Tweens profiles and older. How courses are placed
All the lectures
- Lecture1 - Introduction
- Lecture 2 - Uncertainties
- Lecture 3 - Uncertainties II
- Lecture 4 - Probability and Plausibility
- Lecture 5 - Rules of Probability
- Lecture 6 - Plausible Reasoning - I
- Lecture 7 - Plausible Reasoning - Quantitative rules
- Lecture 8 - Quantitative Rules
- Lecture 9 - Probability Distribution
- Lecture 10 - Random Variables
- Lecture 11 - Random Variables II
- Lecture 12 - Sampling Estimates
- Lecture 13 - Modelling of Environmental Loads
- Lecture 14 - Exercises I
- Lecture 1 - Introduction
- Lecture 2 - Components of Reliability analysis
- Lecture 3 - Levels of Reliability
- Lecture 4 - Error Estimation
- Lecture 5 - Reliability methods - I
- Lecture 6 - Reliability methods - II
- Lecture 7 - Reliability methods - III
- Lecture 8 - Reliability methods - IV
- Lecture 9 - System Reliability - I
- Lecture 10 - System Reliability II
- Lecture 11 - System Reliability - III
- Lecture 12 - Failure domains
- Lecture 13- Failure domains II
- Lecture 14 - Application Problem - I
- Lecture 15 - Application Problem - I continued
- Lecture 16 - Application Problem II
- Lecture 17 - Application Problem II continued
- Lecture 18 - Application Problem II continued
- Lecture 19 - Risk and Reliability
- Lecture 20 - Reliability analysis of structural systems
- Lecture 21- Codes on structural reliability
- Lecture 22 - Variables in Reliability analysis
- Lecture 23 - Mechanical models in Reliability analysis
- Lecture 24 - Mechanical modes in Reliability analysis II
- Lecture 25 - Stochastic Process I
- Lecture 26 - Stochastic Process II
- Lecture 1 - Fatigue Reliability
- Lecture 2 - Design SN curve
- Lecture 3 - Simplified Fatigue Assessment
- Lecture 4 - Short term fatigue damage
- Lecture 5 - Behaviour of tubular joints
- Lecture 6 - Tubular Joints - Experimental studies on T-Joints
- Lecture 7 - Risk Assessment
- Lecture 8 - Logical Risk analysis
- Lecture 9 - Risk analysis of Mechanical Systems
- Lecture 10 - FMEA II
- Lecture 11 - Design FMEA for Offshore Triceratops
- Lecture 12 - Fault Tree Analysis
- Lecture 13 - Event Tree Analysis
- Lecture 14 - Consequence Analysis
- Lecture 15 - Risk Acceptability
- Lecture 16 - Risk and Hazard assessment
- Lecture 17 - Risk Picture
- Lecture 18 - Risk Management