Lecture 15 of 56week-03
Lecture 15 : Euler Angles and ODFs (Contd.)
Prof. Somjeet Biswas · IIT Kharagpur
Credits and licence
- From
- Texture in Materials, IIT Kharagpur (at NPTEL)
- Licence
- CC BY-NC-SA, as NPTEL states it. Non-commercial use only.
- Attribution
- NPTEL states: "Distributed under Creative Commons Attribution-ShareAlike / CC BY - NC - SA", beside a BY-NC-SA badge.
- Who can watch
- Tweens profiles and older. How courses are placed
All the lectures
- Lecture 01 : Introduction
- Lecture 02 : Texture and Anisotropy
- Lecture 03 : Processing - Texture - Anisotropic Properties
- Lecture 04 : Crystal Structure and Stereographic Projections
- Lecture 05 : Utilization of Stereographic Projections
- Lecture 06 : Diffraction and Bragg's Law
- Lecture 07 : Structure Factor and Diffraction Extinction Criteria
- Lecture 08 : Structure factor and diffraction extinction criteria (Contd.)
- Lecture 09 : Pole figures
- Lecture 10 : Pole figures (Contd.)
- Lecture 11 : Inverse Pole Figures
- Lecture 12 : Three Dimensional Texture Analysis
- Lecture 13 : Euler Angles and ODFs
- Lecture 14 : Euler Angles and ODFs (Contd.)
- Lecture 15 : Euler Angles and ODFs (Contd.)
- Lecture 16 : Euler Angles and ODFs (Contd.)
- Lecture 17 : Symmetry Effects on Orientation Matrix
- Lecture 18 : Euler Space and Orientation Matrices
- Lecture 19 : Texture Fibre, Periodicity in Euler Space, Incomplete Pole Figures
- Lecture 20 : Crystal Structures and Symmetry
- Lecture 21 : Size of Euler Space in Relation to Crystal and Sample Symmetry
- Lecture 22 : Macrotexture and Microtexture Measurements
- Lecture 23 : Penetration Depth of X-ray, Neutron, e-1 and Basics of X-ray Generation
- Lecture 24 : Characteristic X-ray, Absorption and Filters
- Lecture 25 : Principles of pole figure measurements by X-ray diffraction
- Lecture 26 : Texture Goniometer Components
- Lecture 27 : Limitations and Errors in X-ray Texture Measurement and Corrections
- Lecture 28 : Basics of Electron Microscopy - I
- Lecture 29 : Basics of Electron Microscopy - II
- Lecture 30 : Kikuchi Diffraction Pattern - I
- Lecture 31 : Kikuchi Diffraction Pattern - II
- Lecture 32 : Quantitative Evaluation of Kikuchi Diffraction Pattern - I
- Lecture 33 : Quantitative evaluation of Kikuchi Diffraction Pattern - II
- Lecture 34 : Quantitative evaluation of Kikuchi Diffraction Pattern - III
- Lecture 35 : Analysis using the TSL-OIM software
- Lecture 36 : Analysis using the AZtecCrystal software
- Lecture 37 : Analysis using the ATEX software
- Lecture 38 : Introduction to solidification texture
- Lecture 39 : Solidification texture in Alloys
- Lecture 40 : Solidification texture in FCC, BCC, and HCP structures
- Lecture 41 : Phase Transformation Texture and Bain Strain
- Lecture 42 : Orientation Relationships between FCC and BCC / BCT
- Lecture 43 : Various Orientation Relationships and Variants
- Lecture 44 : Basic Mechanics of Polycrystal Plasticity
- Lecture 45 : Basic Mechanics of Polycrystal Plasticity (Contd.)
- Lecture 46 : A Metallurgist Point of View
- Lecture 47 : A Metallurgist Point of View (Contd.)
- Lecture 48 : Texture in FCC polycrystals
- Lecture 49 : Texture in BCC polycrystals - I
- Lecture 50 : Texture in BCC polycrystals - II
- Lecture 51 : Texture in HCP polycrystals-I
- Lecture 52 : Texture in HCP polycrystals - II
- Lecture 53 : Texture in HCP polycrystals-III
- Lecture 54 : Static recrystallization
- Lecture 55 : Dynamic recrystallization and recrystallization texture
- Lecture 56 : Dynamic recrystallization and grain refinement during hot large strain shear....