Learn · Ironmaking and Steelmaking
Lecture 12 of 62WEEK 03
Lecture 12: Aerodynamics in Blast Furnace-Part 2: Channeling
Prof. Gour Gopal Roy · IIT Kharagpur
Credits and licence
- From
- Ironmaking and Steelmaking, IIT Kharagpur (at NPTEL)
- Licence
- CC BY-NC-SA, as NPTEL states it. Non-commercial use only.
- Attribution
- NPTEL states: "Distributed under Creative Commons Attribution-ShareAlike / CC BY - NC - SA", beside a BY-NC-SA badge.
- Who can watch
- Tweens profiles and older. How courses are placed
All the lectures
- Lecture 01: Introduction
- Lecture 02: Various Routes of steelmaking
- Lecture 03: The Iron Blast Furnace
- Lecture 04: Thermodynamics of BF ironmaking
- Lecture 05: Thermodynamics of BF Ironmaking (continued)
- Lecture 06: Overall Heat & Material Balance in Blast Furnace
- Lecture 07: RIST Diagram based on overall heat and material balance
- Lecture 08: RIST Diagram based on heat and material balance in the Wustite Reserve Zone
- Lecture 09: Kinetics of gas solid reaction: Iron oxide reduction Part 1
- Lecture 10: Kinetics of gas solid reaction: Iron oxide reduction Part 2
- Lecture 11: Aerodynamics in Blast Furnace-Part 1
- Lecture 12: Aerodynamics in Blast Furnace-Part 2: Channeling
- Lecture 13: Aerodynamics in Blast Furnace-Part 3: Flooding
- Lecture 14: Coke rate and Fuel efficiency in Blast Furnace
- Lecture 15: oxygen enrichment of blast
- Lecture 16: Blast Furnace and it's Raw Material
- Lecture 17: Sintering of Iron Ore
- Lecture 18: Pelletization of Iron Ore
- Lecture 19: Coking Process
- Lecture 20: Testing of Burden Material
- Lecture 21: Burden Distribution
- Lecture 22: Blast Furnace products and their utilization
- Lecture 23: Blast Furnace Productivity
- Lecture 24: Modeling of Blast Furnace
- Lecture 25: New Potential Technologies for Blast Furnace
- Lecture 26: History of Steelmaking
- Lecture 27: Properties of slag
- Lecture 28: The Reaction Equilibria Unlisted
- Lecture 29: Dephosphorization of liquid steel
- Lecture 30: Kinetics of slag metal reaction
- Lecture 31: LD Steel making: Oxygen lance and jet action & decarburization
- Lecture 32: LD steelmaking: Basics, process steps, emulsion formation and stabilization
- Lecture 33: Evolution of impurities in steel and slag constituents during LD processing
- Lecture 34: Hybrid Processes
- Lecture 35: Electric steel making
- Lecture 36: Secondary Steel making: Introduction and de-oxidation
- Lecture 37: Secondary Steel making: Introduction and de-oxidation (continued)
- Lecture 38: Secondary Steel making: Vacuum Techniques for refining steel
- Lecture 39: Homogenization and Gas stirred ladle
- Lecture 40: Ladle de-sulphurization, alloying, stainless steel making
- Lecture 41: Inclusion and its control
- Lecture 42: Injection Metallurgy: Submerged injection of calcium powder
- Lecture 43: Cored wire injection-Modeling, melting sequence, effect of operating parameters
- Lecture 44: IM: Cored wire injection: Industrial implications
- Lecture 45: IM: Tundish metallurgy & design
- Lecture 46: Casting fundamentals- Heat Transfer
- Lecture 47: Casting fundamentals- segregation
- Lecture 48: Morphology of solidification structure & Ingot casting
- Lecture 49: Continuous casting
- Lecture 50: Downstream processing and near net shape casting
- Lecture 51: Introduction to Direct Reduction(DR) and smelting Reduction(SR) Processes
- Lecture 52: Introduction to Direct Reduction(DR) and smelting Reduction (SR) Processes (continued)
- Lecture 53: Coal Based DR Processes
- Lecture 54: Coal Based DR Processes (continued)
- Lecture 55: Gas based DR Processes
- Lecture 56: Gas based DR Processes (continued)
- Lecture 57: Smelting Reduction (SR) Processes
- Lecture 58: Smelting Reduction (SR) Processes (continued)
- Lecture 59: Ironmaking & Steelmaking in India
- Lecture 60: Ironmaking & Steelmaking in India (continued)
- Live Session 05-10-2020
- Live Session 09-11-2020