Learn · Corrosion/Environmental Degradation/Surface Engineering
Lecture 23 of 35Week 9
Non- destructive testing – Part 4
Prof. (HAG) Harish Hirani · IIT Delhi
Credits and licence
- From
- Corrosion/Environmental Degradation/Surface Engineering, IIT Delhi (at NPTEL)
- Licence
- CC BY-NC-SA, as NPTEL states it. Non-commercial use only.
- Attribution
- NPTEL states: "Distributed under Creative Commons Attribution-ShareAlike / CC BY - NC - SA", beside a BY-NC-SA badge.
- Who can watch
- Tweens profiles and older. How courses are placed
All the lectures
- Course Introduction
- Introduction to surface degradation mechanisms
- Surface Degradation: A Commercial Perspective
- Adhesive wear mechanism
- Abrasive wear mechanism
- Wear Phenomena Defined by Dimensionless Parameter
- Erosive and cavitation wear
- Fatigue, Fretting, Melting and Diffusive wear mechanisms
- Fracture surface degradation
- Heat and Radiation on surface degradation
- Role of fatigue & fracture mechanisms in wear debris formation
- Corrosion - Part I
- Corrosion – Part II
- Synergistically combined degradation mechanism
- Fractography
- Environmental assisted surface deterioration - Part 1
- Environmentally assisted surface deterioration- Part 2
- Environmentally assisted surface deterioration- Part 3
- An overview of testing methods
- Non- destructive testing – Part 1
- Non- destructive testing – Part 2
- Non- destructive testing – Part 3
- Non- destructive testing – Part 4
- Selection of Non- Destructive Technique
- Digitization of Established Curves & Data Driven Approach
- Principle component analysis (PCA)
- Failure/ Fault Analysis
- Failure Mode and Effect Analysis (FMEA)
- Failure Mode and Effect Analysis (FMEA)-2
- Maintenance: An Introduction
- Life Cycle Impact Assessment
- Surface Engineering
- Surface Coating
- Economic Losses by Corrosion Degradation
- Quantification of Economic Losses caused by Corrosion Degradation